Fab Fours Premium Front Bumpers

From $1,569.99

• Provides more tire clearance
• Winch ready (Accepts up to 16,500 lb. winches or smaller)
• 3/4 inch D-ring Mounts
• 1/4 inch Boxed mounting system with adjustability to allow a custom fit
• Fab Fours signature injection molded light housings
• Fab Fours 90mm fog and 60mm turn indicator lights included FREE with the bumper
• 2 Stage matte black powder coat or bare steel (-B instead of -1)
• Combination of 1/4 inch and 3/16 inch steel construction
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Vengeance Front Bumpers

From $109.99

• Available in 2 Stage Black Powder Coat or Bare Steel
• Overall design and fit is inchHigh and Tight inch to the contours of the vehicle
• The Vengeance Series front bumper is sensor compatible
• Allows for an integrated 20 inch LED light bar in the center (light bar not included)
• Mounting options on each side for (2) 2x2 Dually lights to give you maximum LED light coverage
• Lower cutout to provide airflow to intercoolers
• Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
• Sensors optimized for vehicles with suspension lifts - stock height trucks may require tuning the sensor mount and will require special care
• Available in a no guard or pre-runner guard option.
• California Residents: WARNING

Fab Fours Premium Rear Bumpers

From $1,029.99

• Bare steel or Black Powder coat
• 3/16 inch steel construction
• Fab Four's signature knife edge and recessed D-Ring mounts
• CB antenna mount
• Compatible with factory receiver hitch
• Tire carrier sold separately
• California Residents: WARNING

Eaton E-Locker Differentials

From $1,249.99

• Electronically-selectable differential for on-demand traction
• Provides 100% axle lock on demand via on/off switch
• Switch is dash-mountable making it easier to reach
• Most reliable on-demand differential on the market
• Allows user to send all available torque to drive wheels
• Provides maximum traction to tackle the most challenging terrain
• Beefy, forged gears for added strength and reliability
• Works in both forward and reverse
• Time-tested performance and durability
• New wiring harness designed for straightforward installation
• Minimal wiring provides a clean, snag-free installation
• California Residents: WARNING

Fab Fours Black Steel Front Ranch Bumpers

From $1,609.99

• Combination Pipe and Tread Plate Construction
• Gloss Black Powder Coat or Bare Steel (-B instead of -1)
• Back up lights included
• Pre-drilled sensor holes
• Retains OEM receiver hitch and wiring locations
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Vengeance Rear Bumpers

From $1,049.99

• Available in Bare Steel and Fab Fours 2 Stage Black Powder Coat
• Two front-side openings allow light options
• (4) 2x2 Dually lights or (2) 6 inch light bars (lights are not included)
• 11gauge US Steel Construction
• Sensor compatible
• Retain OEM Receiver Hitch and Wiring Location
• 11gauge US Stee
• Weight: 65 lbs.
• U.S. Steel Construction
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Elite Front Bumpers

From $1,849.99

• Full Replacement Bumper
• Bolt-on Tow Hooks Included
• OE Style ELITE Badge Included
• Light mounts for factory fog lights
• Optional Bolt-On Winch mount For Up 16,500 LB Winches
• Optional Bolt-On 1 inch D-ring Mount
• Made in the USA
• California Residents: WARNING

Fab Fours Winch Mounts

From $1,019.99

• One piece winch mount
• Fully welded
• No parts or brackets to bolt together
• 3/8 inch Steel mounts
• Slips through the factory to hook slots straight to the factory frame
• 2 Stage matte black powder coat or bare steel (-B instead of -1)
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Rock Sliders

From $1,009.99

• Jeep rocker panel semi-gloss textured black powder coat
• Fab Fours signature knife edge theme
• Top surface doubles as entry step
• Stainless fasteners
• Does not limit tire size
• Works with most aftermarket fender flares on the market
• California Residents: WARNING

Fab Fours Rear Ranch Bumpers

From $1,049.99

• Combination Pipe and Tread Plate Construction
• Gloss Black Powder Coat or Bare Steel (-B instead of -1)
• Back up lights included
• Pre-drilled sensor holes
• Retains OEM receiver hitch and wiring locations
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Aero Series Front Bumpers

From $109.99

• Fab Fours' newest Ultra Light Hybrid bumpers: AERO SERIES
• By combining tube and plate steel these premium bumpers are constructed to be lightweight (weighing only 45bs), offer a sleek AEROdynamic design while providing optimal tire clearance
• Engineered to retain factory skid plate and new technology features including Adaptive Cruise Control and Park Assist
• Center Cutout for Rigid Industries 20? LED light bar
• The fit of this bumper is high and tight and perfectly follows the vehicles body lines
• Available in a no guard or pre-runner guard option
• California Residents: WARNING

Fab Fours Elite Rear Bumpers

From $1,039.99

• Combination Pipe and Smooth Plate Construction
• Matte Black Powder Coat or Bare Steel (-B instead of -1)
• Pre-drilled sensor holes
• Retains OEM receiver hitch and wiring locations
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Black Steel Front Bumpers

From $149.99

• Combination Pipe and Tread Plate Construction
• Gloss Black Powder Coat or Bare Steel (-B instead of -1)
• Bolt-on tow hooks NOW included
• Light Mounts for Factory Fog Lights
• Optional Bolt-on Winch Mount (Accepts up to 12,000 lb. winches or smaller)
• Optional Bolt-on 1 inch D-ring mounts
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Roof Racks

From $1,069.99

• 48" / 60" / 72" Length Options
• Accommodates (4) 2x2 Square LED Lights
• Optional: (2) 50" Light Bars for the Front and (2) 50" Light Bars for Back *Lights are NOT INCLUDED*
• Optional: 4 Light Roof Rack Face Plate (RR14-1). Houses (4) 2x2 Dually Lights *Lights are NOT INCLUDED*
• Provides Tie-Downs
• Modular design allows mounting wherever necessary
• Integrated Zip-Tie holes for wiring
• Weight Capacity Rated For 60lbs
• Does Not Accommodate for Panoramic Sun Roofs on Ford F-150 and Super Duty Models
• 12 GA (gauge) Steel Construction
• Finish: 2 Stage Black Matte Powder Coat or Bare Steel
• California Residents: WARNING

Fab Fours Headache Racks

From $409.99

• Fab Fours signature knife edge design
• Rear brake visibility
• Accepts Rigid Industries Surface Mount 2x2 Dually Lights
• 100% Made in the USA
• Available in Fab Fours Matte Black Powder Coat or Bare Steel
• California Residents: WARNING

Fab Fours Lifestyle Winch Bumpers

From $2,069.99

• Provides more tire clearance
• Winch ready (Accepts up to 10,000 lb. winches or smaller)
• 3/4 inch D-ring mounts
• 1/4 inch Boxed mounting system with adjustability to allow a custom fit
• Fab Fours' signature injection molded light housings
• Fab Fours' 90mm fog and 60mm turn indicator lights included FREE with the bumper!
• 2 Stage matte black powder coat or bare steel (-B instead of -1)
• 3/16 inch Steel construction
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Side Steps

From $425.99

• 10 inch Large full width stomp pad
• Embossed Fab Fours logo
• Matte black powder coat or bare steel (-B instead of -1)
• 100% Made in the USA
• California Residents: WARNING

Eaton Posi Lmited-Slip Differentials

From $568.99

• For use with 17 spline axles
• Designed to work with the following ratios: 3.08 to 3.90 and 4.11 to 4.56
• Replaceable carbon fiber clutches
• Net-forged spider and side gears
• Fully rebuildable
• California Residents: WARNING

Fab Fours Ranch Winch Trays

From $189.99

• Universal to all Black Steel 1/2 ton bumpers
• 1/2 inch and 1/4 inch plate steel
• Pre-drilled for the WARN winch remote relocation kit (WARN part# 14867)
• California Residents: WARNING

Fab Fours Elite Ranch Front Bumpers

From $1,919.99

• Combination Pipe and Smooth Plate Construction
• Matte Black Powder Coat or Bare Steel (-B instead of -1)
• Bolt-on tow hooks NOW included
• Light Mounts for Factory Fog Lights
• OE Styles ELITE Badge Included
• Optional Bolt-on Winch Mount (Accepts up to 16,500 lb. winches or smaller)
• Optional Bolt-on 1 inch D-ring mounts
• Optional Bolt-on 2 inch Receiver
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Elite Hi-Flow Lower Guards

From $149.99

• Available in Bare steel or Powder coat
• Elite Hi-Flow Lower Guard
• For 3/4 And 1 Ton Trucks
• California Residents: WARNING

Fab Fours Replacement Rear Bumpers

From $1,049.99

• 3/16 inch Steel Construction
• D-Rings are cut with 3/4 inch steel and will accept up to a 7/8 inch Shackle
• Retain OEM Receiver Hitch and Wiring Location
• Fab Fours 2 Stage Black Powder Coat
• Weight: 115 lbs.
• U.S. Steel Construction
• 100% Made in the USA
• California Residents: WARNING

Eaton Detroit Truetrac Differentials

From $683.99

Fab Fours 2" Receiver Hitches

From $119.99

• Bolt-on application
• 2' receiver