ReadyLift 3" SST Lift Kit - 69-2831

• Fitment: Direct Fit
• 2018+ Ford Expedtion
• The perfect Expedition mild lift solution for standard shock or CCD equipped vehicles providing a great looking stance with a slight rake
• Made in USA
• Includes CNC-machined aircraft-grade billet 6061-T6 Aluminum front strut extensions and heavy-duty fabricated steel rear coil spring spacers
• Includes CCD harness brackets
• Allows for up to a 35" tire on factory wheels or near factory offset wheels. (285/75-18 or 285/65-20) on vehicles without auto running boards. Smaller diameter tire will be required on Power Deployable Running Boards
• Maintains the factory ride, handling, and suspension geometry.
• California Residents: WARNING
+ View More Specs - View Less Specs

ReadyLift 3.5 Inch Front, 2 Inch Rear SST Lift Kit with Upper Control Arms and Bilstein Shocks - 69-3035

• Fitment: Direct Fit
• GM 2500/3500 HD including AT4
• 3.5" Front/ 2" Rear SST Lift Kit
• SST lift specific forged torsion keys
• Front and rear Bilstein 5100 series shocks
• Xtreme-duty fabricated steel upper control arms
• Heavy-duty tie rods
• Differential spacers
• New longer bump stops, and longer hardware
• Allows for 20x9 0 offset - 35x12.50 tire. *Max with trimming: 20x10 -18 offset - 35x12.50
• Some fender well variance may be experienced between Silverado and Sierra models
• Can be used on trucks equipped with factory snow prep/plow packages
• Works with trucks equipped with either the OE #84461807 or OE #84634344 factory torsion keys and requires ReadyLIFT torsion key unloading tool 66-7816A or similar for installation
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 3" Toyota Suspension Lift Kit with N3 Shocks - 77131

• Fitment: Direct Fit
• Replacement Rough Country front strut option not for use with vehicles equipped with factory Bilstein front strut
• Easy bolt-on installation
• Increased ground clearance
• Maintains factory ride quality
• Levels the front with the rear of the vehicle
• No strut disassembly or strut compressor required for installation
• Strut extensions do not preload your coil spring
• Rear shocks manufactured with recoil cut-off construction
• Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 3.5" Series II Bolt-On Lift Kit with Lift Struts and N3 Shocks - 74232

• Fitment: Direct Fit
• 05-23 Toyota Tacoma
• Includes front lift struts and rear N3 shocks and leaf springs
• Easy installation
• Increased ground clearance
• Maintains factory ride quality
• Levels the front with the rear of the vehicle
• Includes application valved N3 series shock absorbers
• Rear springs minimize axle wrap
• Rough Country's rear springs are an excellent option to replace worn out factory springs
• Requires minor cutting
• Does NOT fit models with 5 lug wheels
• Does NOT fit T/X Baja models
• Does NOT fit XSP-X models
• Does NOT fit PRO4X models
• Struts feature pre-loaded coil
• Maintains smooth, factory-like ride
• Engineered for lifted applications
• Infinitely variable damping
• Leak-proof piston seal
• Massive 1-3/8in bore
• Silver powder coat finish
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 2-3" GM Suspension Lift with N3 Shocks - 16530

• Fitment: Direct Fit
• 4WD models
• Only fits models with 6 lug wheels
• Does not fit straight front axle models
• Redesigned for easier installation
• Maintains stock geometry
• Increased ground clearance
• Control arms include MOOG Problem Solver pressed-in ball joints to ease installation
• Control arms include Clevite brand OEM style rubber bushings
• Forged torsion bar keys are stronger and more durable
• Fabricated blocks are stronger and offer a longer lifespan than cast blocks
• Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 2.5" Jeep Suspension Lift Kit with N3 Shocks - 67731

• Fitment: Direct Fit
• 4-door models
• Non-Rubicon models
• Easy bolt-on installation
• Increased ground clearance
• Clears up to 35" tires
• 35" tires will clear but rubbing may occur with extreme articulation
• If planning on running 35" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 3" Jeep Series II Suspension Lift Kit with Leaf Springs - 630XN2

• Fitment: Direct Fit
• 84-01 Cherokee XJ
• Includes leaf springs
• 100% Bolt-on installation
• Increased ground clearance
• Levels the front with the rear of the Jeep
• Control arms feature Clevite brand OEM style rubber bushings
• N2.0 shocks are application valved providing optimum on and off-road performance and feature:
• Nitrogen charged
• Massive 1 & 3/8-inch bore
• Chrome hardened 9/16-inch piston rod
• 10 stage variable valving
• Spring loaded piston rod seal
• Military spec
• fluid rated to -50 degrees Celsius
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 3.5" Suspension Lift Kit - 19457

• Fitment: Direct Fit
• Increased ground clearance
• Can be returned to stock height
• Differential drops maintain proper axle angle
• Control arms include POM ball joints for greater range of motion and easier installation
• Ball joints are pre-installed to ease installation
• Rear fabricated lift blocks are stronger and offer a longer lifespan than cast blocks
• Features application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
• This kit fits models with both cast steel or aluminum factory control arms
• Requires cutting and grinding
• New lift block replaces the factory equipped block
• If truck is equipped with a mass damper on the front differential, the damper must be removed
• California Residents:WARNING
+ View More Specs - View Less Specs

Rough Country 3.5" Suspension Lift Kit with Upper Control Arms - 29532

• Fitment: Direct Fit
• Lifts and levels front of vehicle with rear
• Front Lift: 3.5in
• Rear Lift: 2.5in
• Increased ground clearance
• Includes forged aluminum control arms
• Control arms include POM ball joints for greater range of motion and easier installation
• Ball joints are pre-installed to ease installation
• Fabricated lift blocks are stronger and offer a longer lifespan than cast blocks
• Features application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 3.5" Jeep Suspension Lift Kit with N3 Shocks - 69430

• Fitment: Direct Fit
• 07-18 Wrangler JK, 4-Door
• 12-15 models require exhaust modifications to clear the front driveshaft
• Easy bolt-on installation
• Increased ground clearance
• Control arm drop brackets promote optimum geometry for smooth handling & ride quality
• Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more effeciently
• Factory tuned coil springs are based on the stock spring rate
• Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 3.5" Toyota Bolt-On Suspension Lift Kit with N3 Shocks - 76831

• Fitment: Direct Fit
• Includes front lifted struts and rear N3 shocks
• Does NOT fit TRD Pro, Rock Warrior, or XSP-X models
• Easy bolt-on installation
• No cutting or drilling required
• Includes New tubular upper control arms
• Control arms keep ball joints at optimum angles for less wear and tear
• Control arms include Clevite rubber bushings for enhanced durability
• Increased ground clearance
• Levels the front and rear of the truck
• Lifetime Replacement Warranty
• Notes: this kit with lift struts is for 4WD models only, use kit 76830 with spacers for 2WD
• Red rear sway bar must be removed for installation
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 2.5" Jeep Suspension Lift Kit with Coil Springs and N3 Shocks - 653.20

• Fitment: Direct Fit
• 97-06 Wrangler TJ/LJ
• 6 cylinder engine
• Easy bolt-on installation
• Increased ground clearance
• Levels the front with the rear of the vehicle
• Front & rear components: Lifted coil springs
• Notes: The use of stock wheels with larger than stock tires may cause the tire to come in contact with the lower control arm at full turn
• Aftermarket wheels are recommended
• California Residents: WARNING
+ View More Specs - View Less Specs

ARB Old Man Emu 2" Lift Kit (Heavy Load) - OMETAC16HKSB

• Fitment: Direct Fit
• 16-23 Toyota Tacoma
• Heavy duty sport kit for extra weight of aftermarket bumpers and winches
• Front 2886 heavy load coil springs
• Front Nitrocharger Sport struts
• Rear Nitrocharger Sport shocks
• EL096R Leaf springs - Heavy load
• U-Bolts and hardware
• Rear driveshaft spacer kit
• Leaf spring bushing kit
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 2.5" Jeep Suspension Lift Kit with N3 Shocks - 67930

• Fitment: Direct Fit
• 07-18 Wrangler JK, 4-Door
• Easy bolt-on installation
• Increased ground clearance
• Includes N3 premium shocks
• Factory tuned coil springs are based on the stock spring rate
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 3" Ford Suspension Lift Kit with Lift Blocks and N3 Shocks - 487.20

• Fitment: Direct Fit
• 3 inch suspension lift kit for 00-05 Excursion 4WD diesel engine models
• Easy bolt-on installation
• Increased ground clearance
• Levels the front with the rear of the vehicle
• Heavy-duty track bar helps keep your axle centered
• Fabricated blocks are stronger and offer a longer lifespan than cast blocks
• Note: Does NOT fit V8 gas engine models
• California Residents: WARNING
+ View More Specs - View Less Specs

ReadyLift 2" SST Lift Kit - 69-3920