Mayhem Tripwire Wheel, 20x10 with 6 on 135 Bolt Pattern - Matte Black - 8110-2136MB

• Fitment: Universal Fit
• Size: 20x10
• Bolt Pattern: 6 on 135
• Finish: Black W/Prism Red
• Offset: -19
• Backspace: 4.75
• Max Load: 2500 lbs
• Center Bore: 87.1
• Center Cap PN: C10TBD
• California Residents: WARNING
+ View More Specs - View Less Specs

BulletProof Hitches 2.5" Anti-Rattle Clamp - 25ANTIRATTLE

• Fitment: Universal Fit
• BulletProof Hitches are manufactured to a very tight tolerance of +/- .010 of an inch. Unfortunately, hitch receivers cannot always live up to these standards. Tolerances can vary as much as .100 of an inch and could cause some unwanted movement or rattle in the hitch
• To solve this, we have developed the 2.5" BulletProof Anti-Rattle Clamp. It allows you to tighten the hitch to the receiver and eliminate all movement. Our Anti-Rattle clamp is made from 1/2" thick pressed break steel and features our signature black, textured powder coat
• Installation is simple - just slide the hitch through the clamp, insert the hitch into the receiver, tighten the bolt and then tighten the jam nut with a wrench to eliminate movement inside the receiver
• California Residents: WARNING

BulletProof Hitches 3" Anti-Rattle Clamp - 3ANTIRATTLE

• Fitment: Universal Fit
• BulletProof Hitches are manufactured to a very tight tolerance of +/- .010 of an inch. Unfortunately, hitch receivers cannot always live up to these standards. Tolerances can vary as much as .100 of an inch and could cause some unwanted movement or rattle in the hitch
• To solve this, we have developed the 3" BulletProof Anti-Rattle Clamp. It allows you to tighten the hitch to the receiver and eliminate all movement. Our Anti-Rattle clamp is made from 1/2" thick pressed break steel and features our signature black, textured powder coat
• Installation is simple - just slide the hitch through the clamp, insert the hitch into the receiver, tighten the bolt and then tighten the jam nut with a wrench to eliminate movement inside the receiver
• California Residents: WARNING

BulletProof Hitches Accessory Clamp - ACCESSORYCLAMP

• Fitment: Universal Fit
• The BulletProof Accessory Clamp was designed to make BulletProof accessories solid in your hitch
• The clamp also helps to prevent theft by requiring the supplied offset wrench to remove your accessory
• Installation is simple - drop the clamp behind the dual ball or accessory, tighten the bolt by hand, finish with the supplied offset wrench and all movement is eliminated!
• *Not Compatible with our Pintle Attachment, Loop, Medium Duty Clevis, Heavy Duty Clevis, Medium Duty Weight Distibution Adapter or Heavy Duty Weight Distribution Adapter
• See below for list of compatible BulletProof accessories
• California Residents: WARNING
+ View More Specs - View Less Specs

BulletProof Hitches Replacement Standard Pins with R-Clips (Pair) - BPRP

• Fitment: Universal Fit
• The BulletProof standard 5/8" pin is made of heat-treated steel for strength and silver zinc plated for superior corrosion resistance
• This pin is designed with strength, durability, and utility in mind
• These pins are supplied/sold as a pair with two R-clips included and are rated to the full capacity of any BulletProof Hitch
• California Residents: WARNING

BulletProof Hitches Extreme Duty Safety Chains - EDCHAINS

• Fitment: Universal Fit
• The most important but also most overlooked connection when towing is the safety chains
• The factory length safety chains are oftentimes not long enough to connect your trailer to your hitch receiver when utilizing a drop hitch
• We have two solutions for this: One is to use the BulletProof Channel Shackles, they allow you to connect the safety chains to the hitch
• The second is to replace the safety chains with longer BulletProof safety chains
• Our safety chains will allow you to connect the trailer to your vehicles hitch receiver regardless of what size drop you have.Sold as a pair of 2 chains
• Extreme Duty: 1/2" thick chain, 42" long with a 46,000 lb. capacity per pair
• California Residents: WARNING
+ View More Specs - View Less Specs

BulletProof Hitches Heavy Duty Safety Chains - HDCHAINS

• Fitment: Universal Fit
• The most important but also most overlooked connection when towing is the safety chains
• The factory length safety chains are oftentimes not long enough to connect your trailer to your hitch receiver when utilizing a drop hitch
• We have two solutions for this: One is to use the BulletProof Channel Shackles, they allow you to connect the safety chains to the hitch
• The second is to replace the safety chains with longer BulletProof safety chains
• Our safety chains will allow you to connect the trailer to your vehicles hitch receiver regardless of what size drop you have
• Sold as a pair of 2 chains
• Heavy Duty: 5/16" chain 44" long with a 22,000 lb. capacity per pair
• California Residents: WARNING
+ View More Specs - View Less Specs

BulletProof Hitches Heavy Duty Weight Distribution Adapter - HDWDA

• Fitment: Universal Fit
• This solid steel adapter allows you to attach a weight distribution system to a BulletProof Hitch
• After modifying your vehicle's suspension and/or adding larger tires, you may need a hitch with a longer drop
• This accessory is compatible with all BulletProof Hitches and MOST weight distribution systems
• The adapter is 2" wide and the holes are 3/4" in diameter and spaced 1-1/4" on center
• Rated to 6,500 pounds trailer weight when used with our Medium Duty Hitch
• Rated to 22,000 pounds trailer weight when used with our Heavy Duty Hitch
• Rated to 36,000 pounds trailer weight when used with our Extreme Duty Hitch
• Note: One BulletProof Locking Pin is compatible with the Heavy Duty Weight Distribution Adapter
• Please note locking pin MUST be used in either center hole ONLY.
• California Residents: WARNING
+ View More Specs - View Less Specs

Mayhem Tripwire Wheel, 20x10 with 6 on 135 Bolt Pattern - Black W/Prism Red - 8110-2136BTR

• Fitment: Universal Fit
• Size: 20x10
• Bolt Pattern: 6 on 135
• Finish: Black W/Milled Spokes
• Offset: -19
• Backspace: 4.75
• Max Load: 2500 lbs
• Center Bore: 87.1
• Center Cap PN: C10TBD
• California Residents: WARNING
+ View More Specs - View Less Specs

Mayhem Tripwire Wheel, 20x10 with 6 on 135/139.7 Bolt Pattern - Black W/Milled Spokes - 8110-2137BM

• Fitment: Universal Fit
• Size: 20x10
• Bolt Pattern: 6 on 135
• Finish: Matte Black
• Offset: -19
• Backspace: 4.75
• Max Load: 2500 lbs
• Center Bore: 87.1
• Center Cap PN: C10TBD
• California Residents: WARNING
+ View More Specs - View Less Specs

Mayhem Tripwire Wheel, 20x10 with 6 on 135/139.7 Bolt Pattern - Black W/Prism Red - 8110-2137BTR

• Fitment: Universal Fit
• Size: 20x10
• Bolt Pattern: 6 on 135/139.7
• Finish: Black W/Milled Spokes
• Offset: -19
• Backspace: 4.75
• Max Load: 2500 lbs
• Center Bore: 106
• Center Cap PN: C10TBD
• California Residents: WARNING
+ View More Specs - View Less Specs

Mayhem Tripwire Wheel, 20x10 with 6 on 135/139.7 Bolt Pattern - Matte Black - 8110-2137MB

• Fitment: Universal Fit
• Size: 20x10
• Bolt Pattern: 6 on 135/139.7
• Finish: Black W/Prism Red
• Offset: -19
• Backspace: 4.75196850393701
• Max Load: 2500 lbs
• Center Bore: 106
• Center Cap PN: C108110BR02
• California Residents: WARNING
+ View More Specs - View Less Specs

Mayhem Tripwire Wheel, 20x10 with 8 on 170 Bolt Pattern - Black W/Milled Spokes - 8110-2170BM

• Fitment: Universal Fit
• Size: 20x10
• Bolt Pattern: 6 on 135/139.7
• Finish: Matte Black
• Offset: -19
• Backspace: 4.75
• Max Load: 2500 lbs
• Center Bore: 106
• Center Cap PN: C10TBD
• California Residents: WARNING
+ View More Specs - View Less Specs

Mayhem Tripwire Wheel, 20x10 with 8 on 170 Bolt Pattern - Black W/Prism Red - 8110-2170BTR

• Fitment: Universal Fit
• Size: 20x10
• Bolt Pattern: 8 on 170
• Finish: Black W/Milled Spokes
• Offset: -19
• Backspace: 4.75
• Max Load: 3640 lbs
• Center Bore: 130.8
• Center Cap PN: C10TBD
• California Residents: WARNING
+ View More Specs - View Less Specs

Mayhem Tripwire Wheel, 20x10 with 8 on 170 Bolt Pattern - Matte Black - 8110-2170MB

• Fitment: Universal Fit
• Size: 20x10
• Bolt Pattern: 8 on 170
• Finish: Black W/Prism Red
• Offset: -19
• Backspace: 4.75
• Max Load: 3640 lbs
• Center Bore: 130.8
• Center Cap PN: C10TBD
• California Residents: WARNING
+ View More Specs - View Less Specs

Mayhem Tripwire Wheel, 20x10 with 8 on 180 Bolt Pattern - Black W/Milled Spokes - 8110-2178BM

• Fitment: Universal Fit
• Size: 20x10
• Bolt Pattern: 8 on 170
• Finish: Matte Black
• Offset: -19
• Backspace: 4.75
• Max Load: 3640 lbs
• Center Bore: 130.8
• Center Cap PN: C10TBD
• California Residents: WARNING
+ View More Specs - View Less Specs

Mayhem Tripwire Wheel, 20x10 with 8 on 180 Bolt Pattern - Matte Black - 8110-2178MB

• Fitment: Universal Fit
• Size: 20x10
• Bolt Pattern: 8 on 180
• Finish: Black W/Milled Spokes
• Offset: -19
• Backspace: 4.75
• Max Load: 3640 lbs
• Center Bore: 124.1
• Center Cap PN: C10TBD
• California Residents: WARNING
+ View More Specs - View Less Specs

Mayhem Tripwire Wheel, 20x10 with 8 on 165.1 Bolt Pattern - Black W/Milled Spokes - 8110-2181BM