G2 Axle & Gear Replacement Axle Kits

From $156.74

• Axle upgrade engineered to withstand the additional load of high-torque applications
• Stronger than factory
• Comes with full manufacturer warranty
• California Residents: WARNING

ARB Air Locking Differentials

From $1,041.20

Eaton E-Locker Differentials

From $1,349.99

• Electronically-selectable differential for on-demand traction
• Provides 100% axle lock on demand via on/off switch
• Switch is dash-mountable making it easier to reach
• Most reliable on-demand differential on the market
• Allows user to send all available torque to drive wheels
• Provides maximum traction to tackle the most challenging terrain
• Beefy, forged gears for added strength and reliability
• Works in both forward and reverse
• Time-tested performance and durability
• New wiring harness designed for straightforward installation
• Minimal wiring provides a clean, snag-free installation
• California Residents: WARNING

Power Trax Lock-Right Lockers

From $305.99

• The original locking differential
• Outstanding value
• Completely replaces stock differential
• Reuses your vehicle's existing carrier
• Includes Zytanium cross shaft
• Fully automatic operation for ease-of-use
• Case not required
• Does not alter ring and pinion
• Works for both front or rear or in tandem
• Thorougly tested to provide solid, reliable performance
• Bolt-in installation
• No gear resetting or shimming required
• Available in 22, 26, 30 and 31 spline configurations
• California Residents: WARNING

Auburn Gear ECTED Max Differentials

From $1,451.99

• Engineered to switch from Limited Slip to full Locking Differential on the fly
• Smooth engagement makes it well-suited for street use
• Activated via in-vehicle switch
• Gearing manufactured from aircraft quality 9310 billet steel
• Heat treated for additional strength
• Can be used with or without lockout hubs
• No additional parts required for installation
• 1-year replacement warranty
• California Residents: WARNING

RCV Ultimate CV Axle Shafts

From $1,399.95

• Twice as strong as OEM Jeep axles
• Eliminates U-joint binding to allow smooth transfer power to the ground
• Low maintenance and operate with a smoothness you can feel
• "No Questions Asked" limited lifetime warranty
• California Residents: WARNING

Dana Spicer Trac-Loc Limited Slip Differentials

From $801.99

• Replaceable Clutch Pack
• Smooth Street Operation
• Includes Carrier Bearings
• Includes Ring Gear Bolts
• Includes Shim Pack
• California Residents: WARNING

Dana Spicer Differential Carriers

From $624.99

• Cast from aircraft grade aluminum
• Fits Standard pinion support
• Billet Spanner nuts for strength
• Double rib design for strength
• California Residents: WARNING

Power Trax No-Slip Traction Systems

From $353.99

• The Powertrax No-Slip Traction Systems are the latest design in traction-adding differential technology. They combine the smooth operation of a limited-slip differential with the traction performance of a locking differential. A precise synchronization mechanism eliminates the ratcheting sounds typical of other locking differentials. Installation is simple because no ring and pinion setup is required. In addition, no special tools or oils are needed.
• California Residents: WARNING

Dana Spicer Dana 30 Axle Shaft Assemblies

From $1,107.99

• Dana Spicer Dana 30 Axle Shaft Assemblies are ultrasonically tested for unparalleled reliability.
• Spicer parts are designed, engineered, and manufactured to meet or exceed OE requirements because they are OE parts, ensuring a perfect fit with our full line of industry-leading axles.
• Spicer Dana 30 Axle Shaft Assemblies are heat treated and cold formed rolled to ensure a much more consistent and stronger axle shaft.
• Spicer axle shafts undergo fatigue testing and ultrasonic testing, delivering a safety factor that’s high even by OE standards.
• California Residents: WARNING

Dana Spicer Dana 44 Axle Shaft Assemblies

From $133.99

• Dana Spicer Dana 44 Axle Shaft Assemblies are ultrasonically tested for unparalleled reliability.
• Spicer parts are designed, engineered, and manufactured to meet or exceed OE requirements because they are OE parts, ensuring a perfect fit with our full line of industry-leading axles.
• Spicer Dana 44 Axle Shaft Assemblies are heat treated and cold formed rolled to ensure a much more consistent and stronger axle shaft.
• Spicer axle shafts undergo fatigue testing and ultrasonic testing, delivering a safety factor that’s high even by OE standards.
• California Residents: WARNING

Motive Gear Axle Shaft Assemblies

From $710.99

• Front Axle Shaft Assembly
• Direct replacements for original equipment Jeep axle shafts without modifications
• Made from quality materials and heat treated for strength and durability
• Fits multiple Jeep models
• California Residents: WARNING

Motive Gear Ten Factory Axle Shafts

From $359.99

• Axle Shafts
• Direct replacements for original equipment Jeep axle shafts without modifications
• Made from quality materials and heat treated for strength and durability
• Fits multiple Jeep models
• California Residents: WARNING

Motive Gear Full Spools

From $273.99

• If you are looking for maximum traction and strength nothing beets a full spool.
• Not Recommended For Street Use
• California Residents: WARNING

Motive Gear Mini Spools

From $118.99

• If you are looking for maximum traction and strength nothing beets a full spool.
• Not Recommended For Street Use
• California Residents: WARNING

Eaton Detroit Locker Differentials

From $1,075.99

Yukon Gear & Axle Zip Locker Differentials

From $1,243.89

Yukon Gear & Axle Dura Grip Positraction Differentials

From $792.89

Yukon Gear & Axle Replacement Axle Shafts

From $198.89

Yukon Gear & Axle Replacement Axle Shaft Kits

From $1,057.89

Yukon Gear & Axle Grizzly Locker Differentials

From $966.89

USA Standard Gear Axle Shafts

From $1,293.89

• Available in different sizes
• With or without ABS ring
• 5 year warranty against manufacturer defects