Skyjacker 5 Inch Suspension Lift Kit with Black Max Series Shocks - 186F2K-B

• Fitment: Direct Fit
• 80-97 Ford F-250/F-350 with Diesel or 460 CID (7.5L) Gas V8 engine
• 2WD models only
• 5" lift
• Includes front coil springs
• Hinge brackets
• Rear block & U-bolt kit
• Front and rear Black Max shocks
• Drop pitman arm required [FA400] - sold separately
• Single or dual steering stabilizer kit recommended [8140/8240] - sold separately
• Longer brake lines recommended - sold separately
• California Residents: WARNING
+ View More Specs - View Less Specs

Rancho 3 Inch Lift Suspension System with Upper Control Arms - RS66507R9

• Fitment: Direct Fit
• 3 inch front lift
• 1.5 inch rear lift
• Fits up to 35 inch tires
• 100% bolt-on system
• Rancho designed upper control arms
• Zerk joints added to pivots
• Rancho Level It RS9000XL front struts
• RS9000XL rear shocks
• Rear lift blocks and U-bolts included
• Will not affect the electronic stability control system
• Maintains OE alignment specs
• Brackets are constructed from high-strenght low-alloy steel
• Includes 2 upper ball joints
• Note: must use OE springs and top mount components on front struts
• Trimming or modification required to provide proper clearance for the 35 inch development wheel and tire. Actual tire size varies between manufacturers
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Vehicle Dynamics 4.5 Inch Stage 1 Suspension System - K64560

• Fitment: Direct Fit
• 50% increase in wheel travel
• Less body-roll than stock truck
• 4.5" more travel from ride height to front bump stops
• Dual rate coil spring
• Lifetime guarantee that coil springs won't sag
• Clears 35" tall tires & 37" tall tires with minor trimming
• No change in towing capacity
• No drive shaft modifications needed
• 99% bolt-on system - no drilling,cutting or welding necessary for install
• Made in the USA
• Can use OEM wheels and tires
• Recommended aftermarket tires: 35" x 12.50" (larger tires may fit but fender trimming and modifications will be required)
• Notes: springs are rated for diesel engines only
• 08 - current Superduty models with gas engines may need exhaust modified to clear front driveshaft
• Radius arm / 4-link frame brackets will require minor drilling into frame to complete install
• Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
• California Residents: WARNING
+ View More Specs - View Less Specs

ReadyLift 3.5" SST Lift Kit with Fabricated Control Arms and Falcon 1.1 Monotube Shocks - 69-35140

• Fitment: Direct Fit
• 2011-2019 GM 2500 HD 2 & 4WD
• 3.5" front / 2" rear SST lift kit
• Allows for up to 34" tall tires
• Includes heavy-duty fabricated steel upper control arms
• Best value for a premium 3.5" SST Lift kit
• 2" rear block gives more rear rake than 1" rear block
• Forged Torsion Keys
• Falcon 1.1 Monotube Shocks
• Will not deform or change shape
• No Cutting of OEM Parts or Welding
• Maintains Factory Ride
• If it needs it - Its in the box
• California Residents: WARNING
+ View More Specs - View Less Specs

TeraFlex 2.5 Inch Lift Kit - 1251000

• Fitment: Direct Fit
• 07-18 Wrangler JK, 4-Door
• Includes 2.5" lift coil springs
• Front and rear 9550 VSS shock absorbers
• Rear swaybar links
• Heavy duty rear trackbar axle bracket
• Bumpstop extensions and all necessary hardware
• 2012+ JKs may require exhaust spacers
• Aftermarket wheels with 4.5" backspacing or less are required
• Max tire size: 35x12.50
• California Residents: WARNING
+ View More Specs - View Less Specs

ReadyLift 3" SST Lift Kit - 69-52310

• Fitment: Direct Fit
• Bolt-on installation no modifications required
• 3" front lift with a 1.25" tall rear block kit
• Allows for up to 35x12.50 tall tires when used on 18"x9" wide wheels with a +12mm offset
• Includes strong tubular steel Control Arms with heavy-duty ball joints
• Includes OEM style rear blocks for correct driveshaft angle
• No Cutting of OEM Parts or Welding
• Maintains Factory Ride
• *Note: Kit does not fit Tundra TRD PRO, trucks equipped with Load-Leveling Rear Height Control Air Suspension or Adaptive Variable Suspension (AVS).
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 4" X-Series Suspension Lift Kit with V2 Monotube Shocks - 67370

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2-Door
• Easy bolt-on installation
• Increased ground clearance
• Levels the front with the rear of the vehicle
• Front adjustable track bar is made of forged solid steel for unsurpassed strength and durability
• Coil correction plates correct the rear coil spring angle by 10 degrees
• Includes V2 Monotube shock absorbers
• X-Flex control arms have Clevite brand OEM style rubber bushings
• Flex joints feature a massive 2.5" diameter body and 1.25" thread
• Joints are fully greasable
• 12-current JK models require exhaust modifications to clear the front driveshaft
• California Residents:WARNING
+ View More Specs - View Less Specs

ReadyLift 2.5 Inch Front Leveling Kit - 66-2726

• Fitment: Direct Fit
• 2.5 inch front lift
• 4WD models only with factory 3 inch rear block
• Kit includes: 2 steel coil spring spacers
• 2 sound isolators
• 2 sway bar mount spacers
• 2 front shock extensions
• Track bar relocation bracket
• 35 inch maximum tire diameter
• 35x12.50 for no rub on a 9 inch wide wheel with +25 offset
• Note: - This 2.5 inch kit provides a near-level stance on F250 trucks with the factory 3 inch rear block. Some may measure 0.5 inch less than true level
• California Residents: WARNING
+ View More Specs - View Less Specs

Fabtech 4 Inch Basic System with Performance Shocks - K2210

• Fitment: Direct Fit
• 08-16 Ford F-250/F-350 4WD
• Fabtech front coil springs
• Trac bar relocation bracket
• Sway bar drop brackets
• Pitman arm
• Rear block & u-bolt kit
• Front and rear Performance series shocks
• Note: Front drive shaft modification may be required to clear exhaust on gas motors
• Tires & wheels: Tire Size – 315/70R17 Wheel Size – 17×8 w/ 4 1/2in BS w/minor trimming
• Tire Size – 325/65R18 Wheel Size – 18×9.5 w/ 4 3/4in BS w/minor trimming
• Tire Size – 35/12.50R20 Wheel Size – 20×10 w/ 5in BS w/minor trimming
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 4" Ford Lift Kit with N3 Rear Shocks - 57431

• Fitment: Direct Fit
• 4WD models
• Includes front lift struts and rear N3 shocks
• Track width remains the same as factory
• Increased ground clearance
• Levels the front with the rear of the vehicle
• Lifted front struts help maintain smooth, factory-like ride
• Front struts are structurally engineered for lifted applications
• Front struts are lifted 4-inches, eliminating the need for strut spacers
• Requires minor cutting and drilling
• 9-inch wide wheels are recommended
• California Residents:WARNING
+ View More Specs - View Less Specs

Rough Country 4" Ford Suspension Lift Kit with V2 Monotube Shocks - 50170

• Fitment: Direct Fit
• 4WD models
• Includes V2 Monotube shocks
• Easy bolt-on installation
• Increased ground clearance
• Levels the front with the rear of the vehicle
• A carrier bearing drop bracket is needed for trucks equipped with a 2-piece rear driveshaft
• California Residents:WARNING
+ View More Specs - View Less Specs

ReadyLift 4 Inch SST Lift Kit with Bilstein Rear Shocks - 69-1041

• Fitment: Direct Fit
• 4 inch front, 2 inch rear lift
• Bolt on installation - no modifications required
• Kit includes: Two heavy-duty DOM tube steel upper control arms with corrected heavy duty 1-ton ball joint pivot angles
• Two top mount front CNC machined billet aluminum strut extensions
• Two front pre-load spacers
• Two rear coil spring spacers with polyurethane spring isolators
• Two bump stop extensions
• Sway bar drop spacers
• Two rear Bilstein 5100 series shocks
• Notes: Max tire diameter - 35"
• 35x12.50 requires 9" wide wheel with 0 offset
• 295/65-20 tire requires no less than +18.
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 3.5" Jeep Suspension Lift Kit with V2 Shocks - 69370

• Fitment: Direct Fit
• Easy bolt-on installation
• Increased ground clearance
• Control arm drop brackets promote optimum geometry for smooth handling & ride quality
• Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more effeciently
• Factory tuned coil springs are based on the stock spring rate
• Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
• California Residents: WARNING
+ View More Specs - View Less Specs

Rough Country 7.5" GM Suspension Lift Kit with Rear N3 Shocks - 26330

• Fitment: Direct Fit
• 2WD models
• Can run 35" tires on factory 20" wheels
• Provides highly sought level stance
• High clearance crossmember design gives unmatched ground clearance
• Requires no modification to the stock drivetrain or exhaust
• 100% precision laser cut materials using the latest computer aided design process
• No need to disassemble your struts to install
• Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem
• Fabricated blocks are stronger and offer a longer lifespan than cast blocks
• Includes application valved N2.0 series shock absorbers which offer the best in balanced performance for on and off-road use
• Requires minor cutting and drilling
• Does NOT fit 2007 "Classic" models
• 18" or larger wheels are required
• Includes Front upper strut spacers w/rear N2.0 shocks
• California Residents: WARNING
+ View More Specs - View Less Specs

ReadyLift 3" Front / 2" Rear Lift Kit - 69-3030

• Fitment: Direct Fit
• 2" Adjustable Leveling Kit
• Allows for 20x9 +18 or 0 offset - 35x12.50 tire
• Trimming may be required with some tire styles on 20x9 0 offset - 35x12.50 or 325/60R20
• Some fender well variance may be experienced between Silverado and Sierra models
• 66-3020 works with trucks equipped with either the OE #84461807 or OE #84634344 factory torsion keys and requires ReadyLIFT torsion key unloading tool 66-7816A or similar for installation
• California Residents: WARNING
+ View More Specs - View Less Specs

ReadyLift 2.5 Inch Front Leveling Kit with SST3000 Shocks - 46-2725

• Fitment: Direct Fit
• 2.5 inch front lift
• 4WD diesel models
• Kit includes: 2.5 inch lift front coil springs
• Sway bar spaceres
• Brake line extensions
• Front SST3000 shocks
• Allows for up to a 35 inch tire, 37 inch is possible but may require trimming
• Made in USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fabtech 2.5 Inch Budget Lift Kit with Front Shock Extenstions - K2353