Welcome Guest
SHOP BY CATEGORY
SHOP BY BRAND
SHOP BY VEHICLE
Sales Support 877-474-4821
877-260-5452
Call Our Stateside Experts!
4.10 5 On 5 Inches Front 4.10
4.10 5 On 5 Inches Front On Sale
3 Product Groups
Switch to View Products
Dana Spicer Dana 44 Front Axle Assemblies
Dana Spicer Dana 44 Front Axle AssembliesFrom $4,134.99
- Genuine Spicers gears
- Thick axle tubes for improved strength
- Redesigned and thicker brackets
- Spicer chromoly axle shafts
- Performance differential cover and Spicer performance gasket
- Increased gross axle weight rating
- California Residents: WARNING
From $4,134.99
4.3
4.3
(11)
TeraFlex Tera30 HD Axle Assemblies
TeraFlex Tera30 HD Axle AssembliesFrom $4,789.99
- 3.25” O.D. x 0.25” wall axle tube increases torsional strength to resist bending with minimal weight increase
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4”-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
From $4,789.99
TeraFlex Tera44 HD Axle Assemblies
TeraFlex Tera44 HD Axle AssembliesFrom $4,794.99
- 3.25” O.D. x 0.25” wall axle tube increases torsional strength to resist bending with minimal weight increase
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4”-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
From $4,794.99
7 Products
Switch to View Product Groups
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera30 HD Front Axle Assembly with 4.10 Gears and ARB Air Locker - 3503410
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Front axle assembly with 4.10 ring and pinion and ARB air locker
- Models with 0-3" lift
- 5x5 bolt pattern
- Measures 65.5" WMS-WMS
- Axle tube: 3.25" x 0.25"
- Includes ARB Air Locker, Spicer ring and pinion, Spicer bearings and install kit, TeraFlex HD ball joints and factory yoke
- 3.25" O.D. x 0.25" wall axle tube increases torsional strength to resist bending with minimal weight increase
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4" thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
$4,789.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
TeraFlex Tera30 HD Front Axle Assembly with 4.10 Gears and ARB Air Locker - 3503410
Part #: TER3503410$4,789.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Front axle assembly with 4.10 ring and pinion and ARB air locker
- Models with 0-3" lift
- 5x5 bolt pattern
- Measures 65.5" WMS-WMS
- Axle tube: 3.25" x 0.25"
- Includes ARB Air Locker, Spicer ring and pinion, Spicer bearings and install kit, TeraFlex HD ball joints and factory yoke
- 3.25" O.D. x 0.25" wall axle tube increases torsional strength to resist bending with minimal weight increase
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4" thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera44 Rubicon HD Front Axle with 4.10 Gears & OEM Rubicon Locker - 3524410
- Fitment: Universal Fit
- JK Wrangler with up to 3 inch lift
- 4.10 gear ratio
- WMS-WMS: 65.5 inches
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: OEM Rubicon locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
$4,794.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
TeraFlex Tera44 Rubicon HD Front Axle with 4.10 Gears & OEM Rubicon Locker - 3524410
Part #: TER3524410$4,794.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Universal Fit
- JK Wrangler with up to 3 inch lift
- 4.10 gear ratio
- WMS-WMS: 65.5 inches
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: OEM Rubicon locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera30 HD Front Axle Assembly with 4.10 Gears and ARB Air Locker - 3534410
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Front axle assembly with 4.10 ring and pinion and ARB air locker
- Models with 4-6" lift
- 5x5 bolt pattern
- Measures 65.5" WMS-WMS
- Axle tube: 3.25" x 0.25"
- Includes ARB Air Locker, Spicer ring and pinion, Spicer bearings and install kit, TeraFlex HD ball joints and factory yoke
- 3.25" O.D. x 0.25" wall axle tube increases torsional strength to resist bending with minimal weight increase
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
$4,789.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
TeraFlex Tera30 HD Front Axle Assembly with 4.10 Gears and ARB Air Locker - 3534410
Part #: TER3534410$4,789.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Front axle assembly with 4.10 ring and pinion and ARB air locker
- Models with 4-6" lift
- 5x5 bolt pattern
- Measures 65.5" WMS-WMS
- Axle tube: 3.25" x 0.25"
- Includes ARB Air Locker, Spicer ring and pinion, Spicer bearings and install kit, TeraFlex HD ball joints and factory yoke
- 3.25" O.D. x 0.25" wall axle tube increases torsional strength to resist bending with minimal weight increase
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera44 HD Front Axle Assembly with 4.10 Gears and ARB Air Locker - 3543410
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Front axle assembly with 4.10 ring and pinion and ARB air locker
- Models with 4-6" lift
- 5x5 bolt pattern
- Measures 65.5" WMS-WMS
- Axle tube: 3.25" x 0.5"
- Includes ARB Air Locker, Spicer ring and pinion, Spicer bearings and install kit, TeraFlex HD ball joints and factory yoke
- 3.25" O.D. x 0.5" wall axle tube increases torsional strength to resist bending with minimal weight increase
- Asymmetric housing design for extra-long tube side strength
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- 4-6" lift features a raised pinion angle and raised track bar bracket
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
$4,794.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
TeraFlex Tera44 HD Front Axle Assembly with 4.10 Gears and ARB Air Locker - 3543410
Part #: TER3543410$4,794.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Front axle assembly with 4.10 ring and pinion and ARB air locker
- Models with 4-6" lift
- 5x5 bolt pattern
- Measures 65.5" WMS-WMS
- Axle tube: 3.25" x 0.5"
- Includes ARB Air Locker, Spicer ring and pinion, Spicer bearings and install kit, TeraFlex HD ball joints and factory yoke
- 3.25" O.D. x 0.5" wall axle tube increases torsional strength to resist bending with minimal weight increase
- Asymmetric housing design for extra-long tube side strength
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- 4-6" lift features a raised pinion angle and raised track bar bracket
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera44 Rubicon HD Front Axle Assembly with 4.10 Gears and OEM Locker - 3545341
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Rubicon models
- Front axle assembly with 4.10 ring and pinion and OEM Rubicon locker
- Models with 4-6" lift
- 5x5 bolt pattern
- Measures 65.5" WMS-WMS
- Axle tube: 3.25" x 0.5"
- Includes OEM Rubicon locker, Spicer ring and pinion, Spicer bearings and install kit, TeraFlex HD ball joints and factory yoke
- 3.25" O.D. x 0.5" wall extreme duty axle tube increases torsional strength to resist bending
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- 4-6" lift features a raised pinion angle and raised track bar bracket (where applicable)
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents:WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
$4,794.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
TeraFlex Tera44 Rubicon HD Front Axle Assembly with 4.10 Gears and OEM Locker - 3545341
Part #: TER3545341$4,794.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Rubicon models
- Front axle assembly with 4.10 ring and pinion and OEM Rubicon locker
- Models with 4-6" lift
- 5x5 bolt pattern
- Measures 65.5" WMS-WMS
- Axle tube: 3.25" x 0.5"
- Includes OEM Rubicon locker, Spicer ring and pinion, Spicer bearings and install kit, TeraFlex HD ball joints and factory yoke
- 3.25" O.D. x 0.5" wall extreme duty axle tube increases torsional strength to resist bending
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- 4-6" lift features a raised pinion angle and raised track bar bracket (where applicable)
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents:WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera44 HD Front Axle with 4.10 Gears & ARB Air Locker - 3552410
- Fitment: Universal Fit
- JK Wrangler with up to 3 inch lift
- 4.10 gear ratio
- WMS-WMS: 65.5 inches
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: ARB air locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
$4,794.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$4,794.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Universal Fit
- JK Wrangler with up to 3 inch lift
- 4.10 gear ratio
- WMS-WMS: 65.5 inches
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: ARB air locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Dana Spicer Dana 44 Ultimate JK Front Axle Assembly 4.10 Ratio - 10032862
- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44
- 4.10 ratio
- Front
- Standard differential
- 5/16 inch thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer chromoly axle shafts
- Spicer Life Series (SPL) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer performance gasket
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
- California Residents: WARNING + View More Specs - View Less Specs
$4,134.99
$5,292.79
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$4,134.99
$5,292.79
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44
- 4.10 ratio
- Front
- Standard differential
- 5/16 inch thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer chromoly axle shafts
- Spicer Life Series (SPL) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer performance gasket
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
- California Residents: WARNING + View More Specs - View Less Specs
