ARB Old Man Emu 4 Inch Lift Kit - OMEJK4

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Gas engine models
• Front lift method: Coil springs
• Rear lift method: Coil Springs
• Kit contains Old Man Emu Nitrocharger Sport Shocks
• Exhaust modifications or aftermarket front driveshaft required when fitting OMEJK4 to 2012+ Jeep Wrangler JKs
• When fitting larger tires, aftermarket wheels (rims) with greater offset (less backspacing) may be required to clear swaybar links and control arms
• 4 Door: Due to variations in vehicle weights (aftermarket accessories), trim packers are included to adjust the ride height
• California Residents: WARNING
+ View More Specs - View Less Specs

ARB Old Man Emu 4" Premium Lift Kit with BP-51 Shocks - OMEJK4BP51P

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Includes front and rear BP-51 shocks
• Complete set of adjustable front and rear control arms (upper and lower)
• Front and rear coil springs
• Steering stabilizer included
• Bumpstop kit
• Brake line relocation kit
• Sway bar disconnect kit
• 3 year 37,000 mile warranty
• California Residents: WARNING
+ View More Specs - View Less Specs

ARB Old Man EMU 4" Lift Kit (Diesel Model Only) - OMEJK4D

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Diesel models only
• 4" Lift
• Front spring kit
• Front nitrocharger sport shock absorbers
• Rear spring kit
• Brake line extensions
• Panhard rod correction bracket
• HD steering stabilizer
• California Residents: WARNING
+ View More Specs - View Less Specs

Rancho 4.5" Lift Kit Short Arm - RS66125B

• Fitment: Direct Fit
• Non-Rubicon models only
• Premium on and off-road experience your JL Wrangler
• Corner-Specific, Tuned progressive rate coil spring
• On vehicle adjustable control arms with D2 bushings
• Heavy-duty front and rear adjustable track bars with D2 bushings
• All brackets fabricated from high-strength, low-alloy steel
• Designed with 37-in. tires
• Installs easily - 100-Percent bolt-on system
• California Residents: WARNING
+ View More Specs - View Less Specs

Fabtech 5" Trail System with Dirt Logic Series Shocks - K4209DL

• Fitment: Direct Fit
• Wrangler JL 4-door with Diesel engine
• Includes: front & rear dual rate coil springs
• Front & rear lower 5 ton link arms
• Front & rear bump stop extensions
• Front & rear track bar bracket
• Heavy duty flipped draglink
• Front & rear sway bar links
• Front shock mount bracket
• Front & rear Dirt Logic series monotube shocks
• Notes: Fits 4-door models only
• Fits Diesel models only
• Extreme offroad use requires heavy-duty driveshafts
• California Residents: WARNING
+ View More Specs - View Less Specs

Fabtech 5" Trail System with Stealth Series Shocks - K4209M

• Fitment: Direct Fit
• Wrangler JL 4-door with Diesel engine
• Includes: front & rear dual rate coil springs
• Front & rear lower 5 ton link arms
• Front & rear bump stop extensions
• Front & rear track bar bracket
• Heavy duty flipped draglink
• Front & rear sway bar links
• Front shock mount bracket
• Front & rear Stealth series monotube shocks
• Notes: Fits 4-door models only
• Fits Diesel models only
• Extreme offroad use requires heavy-duty driveshafts
• California Residents: WARNING
+ View More Specs - View Less Specs

Fabtech 5" Trail System with Dirt Logic Reservoir Series Shocks - K4210DL

• Fitment: Direct Fit
• Wrangler JL 4-door with Diesel engine
• Includes: front & rear dual rate coil springs
• Front & rear lower 5 ton link arms
• Front & rear bump stop extensions
• Front & rear track bar bracket
• Heavy duty flipped draglink
• Front & rear sway bar links
• Front shock mount bracket
• Front & rear Dirt Logic reservoir series monotube shocks
• Notes: Fits 4-door models only
• Fits Diesel models only
• Extreme offroad use requires heavy-duty driveshafts
• California Residents: WARNING
+ View More Specs - View Less Specs

TeraFlex 4.5" Sport ST4 Suspension System - 1614400

• Fitment: Direct Fit
• 18-Current Wrangler JL, 2-Door
• Shocks are not included
• Delivers true street & trail (ST) performance
• Dependable performance with zero worries
• Positive, responsive handling with reduced NVH
• Front (3.5”+) and Rear (2.5”+) Track Bar Brackets correct caster angle, steering geometry, center the axles, and reduce body roll
• Falcon Progressive Front & Rear Bump Stops protect occupants and the vehicle from hard suspension bottoming
• Full range of movement for off-road flex and articulation
• Install and drive, simple bolt-on installation – no welding required
• No alignment required
• Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires
• Requires aftermarket wheels with 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels
• Max Tire Size: Sport/Sahara Fenders: 35” (with 3” front & 2.5” rear bump stops), Sport/Sahara Fenders: 37” (with 3.5” front & 4” rear bump stops) and Rubicon Fenders: 37” (with 2.5” front & 3” rear bump stops)
• TeraFlex Lifetime Warranty
• California Residents: WARNING
+ View More Specs - View Less Specs

TeraFlex 4.5" Coil Spring Base Lift Kit - 1366000

• Fitment: Direct Fit
• Front track bar axle bracket (4.5-6" Lift)
• (2) 2" Bump stop strike pad extensions Front lower
• (4) 0.5" Bump stop strike pad shims Front lower
• 1.5" Bump stop extension kit Rear upper
• 0.5" Bump stop shim kit Rear upper
• 0.5" Bump stop strike pad shim kit Rear lower
• 11.5" Front sway bar link kit with swivel stud (2.5-4.5" Lift)
• 13" Rear sway bar link kit with swivel stud (2.5-4.5" Lift)
• All necessary hardware
• California Residents: WARNING
+ View More Specs - View Less Specs

TeraFlex 4.5" Alpine CT4 Long Arm Suspension System - 1524000

• Fitment: Direct Fit
• 4-door models
• Shocks are not included
• Lift Height: 4.5"
• Max Tire Diameter: Sport/Sahara Fenders: 35" (with 3" front & 2.5" rear bump stops)
• Sport/Sahara Fenders: 37" (with 3.5" front & 4" rear bump stops)
• Rubicon Fenders: 37" (with 2.5" front & 3" rear bump stops)
• Aftermarket High Fenders: 39"+ (varies)
• Adjustable Alpine Long Control Arms & Brackets balance front caster angle and pinion angles
• Optimizes rear pinion angles on 3-6" lift kits
• Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength
• Alpine Long Control Arms & Brackets reduce bushing stress and shock load
• Delivers true Cross-Trail (CT) performance
• Dependable performance with zero worries
• Positive, responsive handling with reduced NVH
• High-quality, maintenance-free factory-style bushings provide excellent vibration damping and ride quality
• Falcon Progressive Front & Rear Bump Stops provide progressive compression during high-speed suspension movement
• Adjustable Alpine IR Front Track Bar and Front (3.5"+) and Rear Track Bar Brackets improve steering response
• Centers axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
• Full range of movement for off-road flex and articulation
• Install and drive simple bolt-on installation no welding required
• TeraFlex Lifetime Warranty
• Cutting/removal of factory control arm bracketry is required
• Alignment required
• Requires aftermarket wheels with 4.75" backspacing or less or Offset Wheel Adapters for stock wheels
• Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35" or larger tires
• Bump stop extension and shim requirements will vary based on setup including wheel/tire combination, shock collapsed length, and fenders
• California Residents: WARNING
+ View More Specs - View Less Specs

TeraFlex 4.5" Alpine CT4 Long Arm Suspension System - 1524200

• Fitment: Direct Fit
• Wrangler JL, 2-Door
• Shocks are not included
• Lift Height: 4.5"
• Max Tire Diameter: Sport/Sahara Fenders: 35" (with 3" front & 2.5" rear bump stops)
• Sport/Sahara Fenders: 37" (with 3.5" front & 4" rear bump stops)
• Rubicon Fenders: 37" (with 2.5" front & 3" rear bump stops)
• Aftermarket High Fenders: 39"+ (varies)
• Adjustable Alpine Long Control Arms & Brackets balance front caster angle and pinion angles
• Optimizes rear pinion angles on 3-6" lift kits
• Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength
• Alpine Long Control Arms & Brackets reduce bushing stress and shock load
• Delivers true Cross-Trail (CT) performance
• Dependable performance with zero worries
• Positive, responsive handling with reduced NVH
• High-quality, maintenance-free factory-style bushings provide excellent vibration damping and ride quality
• Falcon Progressive Front & Rear Bump Stops provide progressive compression during high-speed suspension movement
• Adjustable Alpine IR Front Track Bar and Front (3.5"+) and Rear Track Bar Brackets improve steering response
• Centers axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
• Full range of movement for off-road flex and articulation
• Install and drive simple bolt-on installation no welding required
• TeraFlex Lifetime Warranty
• Cutting/removal of factory control arm bracketry is required
• Alignment required
• Requires aftermarket wheels with 4.75" backspacing or less or Offset Wheel Adapters for stock wheels
• Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35" or larger tires
• Bump stop extension and shim requirements will vary based on setup including wheel/tire combination, shock collapsed length, and fenders
• California Residents: WARNING
+ View More Specs - View Less Specs

TeraFlex 4.5" Alpine RT4 Long Arm Suspension System - 1534000

• Fitment: Direct Fit
• 4-door models
• Shocks are not included
• Lift Height: 4.5"
• Max Tire Diameter: Sport/Sahara Fenders: 35" (with 3" front & 2.5" rear bump stops)
• Sport/Sahara Fenders: 37" (with 3.5" front & 4" rear bump stops)
• Rubicon Fenders: 37" (with 2.5" front & 3" rear bump stops)
• Aftermarket High Fenders: 39"+ (varies)
• Adjustable Alpine IR Long Control Arms & Brackets balance front caster angle and pinion angles
• Optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6" lift kits
• Alpine IR Long Control Arms are constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength
• Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop
• Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength with reduced NVH compared to other long arm kits
• Delivers true Rogue Trail (RT) performance
• Dependable performance with zero worries
• Positive, responsive handling with reduced NVH
• Maintenance-free IR Bushings improve on- and off-road ride quality and performance
• Adjustable Alpine IR Front Track Bar and Front (3.5"+) and Rear Track Bar Brackets improve steering response
• Centers axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
• Front SpeedBump and rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
• Full range of movement for off-road flex and articulation
• Install and drive simple bolt-on installation no welding required
• TeraFlex Limited Lifetime Warranty against defects
• Requires aftermarket wheels with 4.75" backspacing or less or Offset Wheel Adapters for stock wheels
• Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35" or larger tires
• California Residents: WARNING
+ View More Specs - View Less Specs

TeraFlex 4.5" Alpine RT4 Long Arm Suspension System - 1534200

• Fitment: Direct Fit
• Wrangler JL, 2-Door
• Shocks are not included
• Lift Height: 4.5"
• Max Tire Diameter: Sport/Sahara Fenders: 35" (with 3" front & 2.5" rear bump stops)
• Sport/Sahara Fenders: 37" (with 3.5" front & 4" rear bump stops)
• Rubicon Fenders: 37" (with 2.5" front & 3" rear bump stops)
• Aftermarket High Fenders: 39"+ (varies)
• Adjustable Alpine IR Long Control Arms & Brackets balance front caster angle and pinion angles
• Optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6" lift kits
• Alpine IR Long Control Arms are constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength
• Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop
• Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength with reduced NVH compared to other long arm kits
• Delivers true Rogue Trail (RT) performance
• Dependable performance with zero worries
• Positive, responsive handling with reduced NVH
• Maintenance-free IR Bushings improve on- and off-road ride quality and performance
• Adjustable Alpine IR Front Track Bar and Front (3.5"+) and Rear Track Bar Brackets improve steering response
• Centers axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
• Front SpeedBump and rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
• Full range of movement for off-road flex and articulation
• Install and drive simple bolt-on installation no welding required
• TeraFlex Limited Lifetime Warranty against defects
• Requires aftermarket wheels with 4.75" backspacing or less or Offset Wheel Adapters for stock wheels
• Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35" or larger tires
• California Residents: WARNING
+ View More Specs - View Less Specs

Tuff Country 4 Inch EZ-Ride Lift Kit - 44105

• Fitment: Direct Fit
• 4-door models
• Kit includes: full set of front and rear, upper and lower control arms
• Front and rear lift coil springs
• Front adjustable track bar
• Front bump stops
• Rear bump stop brackets
• Rear track bar relocation bracket
• Rear sway bar end links
• All necessary hardware
• Note: does not include shocks, longer shocks are required
• Recommended tire size: 37 inch x 12.5 inch
• Standard rim backspacing
• California Residents: WARNING
+ View More Specs - View Less Specs

TeraFlex 4 Inch Base Lift Kit with 9550 VSS Shocks - 1251401

• Fitment: Direct Fit
• 07-18 Wrangler JK, 4-Door
• 4 inch lift
• Kit includes: front and rear 4 inch lift coil springs
• Front and rear bump stops
• Front & rear brake lines
• Front brake line anchor kit
• Front sway bar disconnects
• Rear track bar bracket
• Rear sway bar links
• Front and rear TeraFlex 9550 VSS shocks
• All necessary hardware and more
• Notes: Requires aftermarket wheels with 4.5 inch backspacing or less - or Offset Wheel Adapters (# 1055000) for stock wheels
• 2012-2018 JK/JKU models require Exhaust Spacers (# 2610000) or other exhaust modification for proper driveshaft clearance
• Driveshaft modifications are highly recommended with this suspension system. See the TeraFlex Rzeppa High Angle CV Kit (# 1744014)
• Requires 2.5-4 inch adjustable Alpine flexarms (# 1415610) or 3-6 inch adjustable Alpine Long Flexarms (# 1315010) and HD Forged Adjustable Front Track Bar (# 1753418) to set correct suspension geometry including caster angle, pinion angle, roll center, & load tuning during re-alignment after installation. Proper suspension geometry ensures all stability controls function within factory paRameters.
• California Residents: WARNING
+ View More Specs - View Less Specs

TeraFlex 4.5" Coil Spring Base Lift Kit - 1402402