4 Wheel Parts Xtreme R/T Tires

From $272.99

• Available While Supplies Last - Limited Quantities Available
• Available in diameters from 33-inch to 37-inch
• Load Ranges D, E, and F
• High ratio contact area- maximizes road contact
• 25% longer tread life than a leading MT
• 90% less road noise than a leading MT
• Designed to tackle the toughest terrain
• Provides maximum protection from off-road hazards
• Claw uneven terrain for maximum traction
• Evacuate debris, dirt and mud ensuring maximum traction on the trail

TeraFlex CRD60 HD Axle Assemblies

From $2,620.99

• Tera CRD60 specific high-pinion rear axle housing design
• HD bearing caps increase rigidity and reduce ring and pinion distortion
• Constant Radius Design (CRD) provides maximum ground clearance regardless of pinion angle
• Built-in “skimmer” cuts ring gear oil halo and forces it into the pinion bearings
• Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing
• Oversized outer pinion bearing handles increased torque and high-load conditions
• High-capacity housing holds maximum amount of oil
• Asymmetric housing design for extra-long tube side strength
• Pre-installed inner axle seals
• Ductile cast iron housing with increased rib gussets
• HD ductile iron differential cover with increased cover mounting area
• Integrated lower control arm skid plates
• High-flow oil passages
• Bottom oil drain hole for simple fluid changes
• Reinforced rear track bar mount with multiple mounting locations
• UV protected triple-stage powder coat for corrosion resistance
• 1/4”-thick CNC laser cut axle brackets for extreme strength
• Pre-installed upper control arm bushings
• Proper pinion angle for lifted applications
• Features a raised pinion angle and raised track bar bracket
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Retains all ESP, ABS, and speedometer sensor capability
• 100% engineered, designed, and built in the USA with new components

4 Wheel Parts S-Series 3D Mesh Gloss Black Milled Wheels

From $274.99

• 4 Wheel Parts Exclusive Wheels
• 3D Mesh design
• Stronger & lighter than cast wheels with roll-formed construction
• Lifetime structural warranty
• Available in multiple sizes, bolt patterns and offsets
• Available in Gloss Black or Smoke finish
• 2-year finish warranty

4 Wheel Parts T-Series Split Spoke Design Bronze with Black Lip Wheels

From $255.99

• 4 Wheel Parts Exclusive Wheels
• Simulated beadlock ring
• Aggressive split spoke design
• Stronger & lighter than cast wheels, with roll-formed construction
• Lifetime structural warranty
• Available in multiple sizes, bolt patterns and offsets
• Available in Satin Black with Black Lip or Bronze with Black Lip
• 2-year finish warranty

4 Wheel Parts S-Series 3D Mesh Smoke Wheels

From $358.99

• 4 Wheel Parts Exclusive Wheels
• 3D Mesh design
• Stronger & lighter than cast wheels with roll-formed construction
• Lifetime structural warranty
• Available in multiple sizes, bolt patterns and offsets
• Available in Gloss Black or Smoke finish
• 2-year finish warranty

4 Wheel Parts T-Series Split Spoke Design Satin Black with Black Lip Wheels

From $255.99

• 4 Wheel Parts Exclusive Wheels
• Simulated beadlock ring
• Aggressive split spoke design
• Stronger & lighter than cast wheels, with roll-formed construction
• Lifetime structural warranty
• Available in multiple sizes, bolt patterns and offsets
• Available in Satin Black with Black Lip or Bronze with Black Lip
• 2-year finish warranty

TeraFlex NP231 Extreme Short Shaft Kit

From $9.99

• Extreme Short Shaft Kit
• With 231 transfer case
• Eliminates slip yoke
• Requires a longer CV style drive shaft
• California Residents: WARNING

TeraFlex Sway Bar Links

From $16.99

• Sway Bar Links
• Teraflex Front Links when connected provides immediate reaction during sway bar loading to eliminate excess play
• Rear Links are designed to reduce clearance issues between the tire and rear sway bar
• Available for different lift heights and fixed or quick disconnect styles
• California Residents: WARNING

TeraFlex Short Shaft SYE

From $11.99

• Eliminates slip yoke and need for transfer case drop
• Withstands 50% more torque
• Increases rear drive shaft length by 4 inch
• Requires use of CV style rear drive shaft
• California Residents: WARNING

TeraFlex Disc Brake Kit

From $7.99

• Disc Brake Kit
• Bolt-on upgrade to replace factory Jeep drum brakes
• Dana 35 c-clip, Dana 44 and Chrysler 8.25
• Kits Includes Rotors
• Backing Plates with Integrated Park Brake
• Calipers
• Brake Pads
• Hardware
• California Residents: WARNING

TeraFlex Heavy-Duty Tie Rod

From $215.99

• Tie Rod
• Heavy-Duty
• 1-1/2 inch hexagon 6061 T6 aluminum
• For use with Dana 30 high steer knuckle
• Small taper
• California Residents: WARNING

TeraFlex Rear Disc Brake Conversion

From $7.99

• Rear Disc Brake Conversion
• Non C-clip and D-44 rear axles
• Improves stopping power
• Bolt-on installation
• Kit includes everything needed to convert to disc brakes
• California Residents: WARNING

TeraFlex Replacement Track Bar Bushing

From $21.99

• The TeraFlex TJ track bar bushing uses OE style rubber bushings with an additional rate plate for superior handling and responsive control
• Designed to reduce the effects of front wheel shimmy
• Improve durability and tunability
• Must be pressed in
• California Residents: WARNING

TeraFlex Revolver Crush Cushion

From $7.99

• Replace your worn Revolver Shackle components, and restore complete functionality
• The UHMW nylon cushion keeps the Revolver shackle properly positioned when folded in the closed/resting position
• Sold Individually
• California Residents: WARNING

TeraFlex Sway Bar Bushing Kit

From $24.99

• This TeraFlex Bushing Ball Replacement Kit is designed to serve as direct replacements for the TeraFlex brand quick disconnect swaybar link bushings
• The polyurethane bushings are specifically designed for easy replacing
• California Residents: WARNING

4 Wheel Parts Front Bumpers

From $49.99

• Hybrid tube and sheet metal construction
• Auxiliary lighting cut outs and mounts
• A pair of d-ring recovery points
• Customizable logo plate
• Powder coat finish to be trail ready

4 Wheel Parts Side Steps

From $169.99

• Hybrid tube and sheet metal construction
• Wheel to wheel coverage
• Provides a functional step to enter and exit the vehicle
• Allows for easy access to roof top accessories
• Bolt-on installation

4 Wheel Parts Fender Delete Kits

From $49.99

• Fills the factory fender pocket when fenders are removed
• Has mounting provisions for rock lights
• Aluminum construction
• Bolt-on installation

TeraFlex Base Lift Kits

From $1,049.99

• Depending On Lift Height And Vehicle Model Kits Typically Include:
• Dropped Pitman Arm
• Front Sway Bar Disconnects
• Rear Sway Bar Links
• Rear Track Bar Bracket
• Bump Stops
• Brake Line Extension Brackets
• All Necessary Hardware
• California Residents: WARNING

4 Wheel Parts Rear Bumpers

From $824.99

• Hybrid tube and sheet metal construction
• Auxiliary lighting cut outs and mounts
• A pair of d-ring recovery points
• Works with factory tow package
• Provisions for factory sensor packages
• Customizable 4WP logo plate

4 Wheel Parts Skid Plates

From $199.99

4 Wheel Parts S-Series Center Caps

From $33.99

• Finish: Gloss Black
• Center Cap for 4 Wheel Parts S-Series Wheels

4 Wheel Parts 3rd Brake Light Bracket

From $29.99

• Moves the factory 3rd brake light upwards in order to clear a 37” spare tire
• Works with or without the 4WP Spare Tire Relocation Bracket

4 Wheel Parts T-Series Center Caps

From $33.99

• Finish: Satin Black
• Center Cap for 4 Wheel Parts T-Series Wheels