AMP Research PowerSteps

From $1,249.99

• 5-year/60,000-mile warranty
• 600 pound load capacity per side
• Designed and Made in the USA
• High-strength die-cast, aluminum-alloy linkage components
• Zero-maintenance stainless-steel pivot pins with self-lubricating bushings
• California Residents: WARNING

G2 Axle & Gear Replacement Axle Kits

From $115.49

• Axle upgrade engineered to withstand the additional load of high-torque applications
• Stronger than factory
• Comes with full manufacturer warranty
• California Residents: WARNING

G2 Axle & Gear Master Ring and Pinion Installation Kits

From $116.99

• G2 ring and pinion installation kit
• Includes Timken bearings, ring gear bolts, shims to set pinion and carrier bearing preloads, pinion seal and pinion nut
• California Residents: WARNING

G2 Axle & Gear Dana 44 JK Ring and Pinion Sets

From $103.50

• Dana 44 JK Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Ring and Pinion Sets

From $108.00

• Engineered and manufactured to handle increased load
• Forged from high-strength 8620 Steel
• Precision-machined to OE specifications for perfect mesh
• Tight tolerances ensure easy set up and quiet OE-like operation
• Double-lapped and shot-peened for improved longevity
• Heat-treated for added durability
• Wide application range from
• Full 10-year warranty
• California Residents: WARNING

G2 Axle & Gear Hammer Differential Covers

From $119.99

• G2 aluminum differential covers are designed to not only protect your ring & pinion, they are designed to help cool your gear oil for prolonged bearing life. Made from high strength heat treated aluminum to withstand direct hits, these covers help protect your investment while adding a distinct look to your vehicle.
• California Residents: WARNING

G2 Axle & Gear Brute Differential Covers

From $112.00

G2 Axle & Gear Replacement Axle Shafts

From $114.99

• High Strength Alloy Steel
• Heat treated
• Big spline options
• Rolled splines
• Wheel studs included
• California Residents: WARNING

G2 Axle & Gear Placer Gold Series Axles

From $104.00

• G/2s new made in the U.S.A. Placer Gold Series axles are an even stronger axle option for Jeep JK Wrangler owners. These new American made axles use high quality 4340 chromoly steel and feature a stronger forging with more material in critical areas.
• California Residents: WARNING

AMP Research PowerStep Xtreme Running Boards

From $2,199.99

• Electric Power
• Full Strength Die Cast Aluminum
• Corrosion Resistant Finish
• Delivers Substantial Power When Deploying and Withdrawing
• All Weather Functioning
• Hard Working Construction For Superb Traction
• Twin Motors Drive Running Board
• OEM Quality Construction
• LED Illumination When Boards Are Deployed
• 5-Year/60,000 Mile Warranty
• California Residents: WARNING

G2 Axle & Gear Dana 30 JK Ring and Pinion Sets

From $131.99

• Dana 30 JK Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

AMP Research BedSteps

From $329.00

• AMP Research BedStep bumper step
• Fits: Chevy, Ford, Dodge, Jeep and Toyota
• High-strength die-cast, aluminum-alloy linkage components
• 2 and 4-door models
• Military-spec, anodized and Teflon finish to resist corrosion
• Mounts under rear bumper
• 3 year/36,000 mile warranty
• California Residents: WARNING

G2 Axle & Gear Dana 44 Ring and Pinion Sets

From $118.24

• Dana 44 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Dana 30 Ring and Pinion Sets

From $109.99

• Dana 30 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Core 44 Rear Bare Housings

From $900.00

• American-made CORE 44 housings
• Feature forged bearing caps
• G-lock adjuster nut system to set backlash and carrier bearing preload
• Additional ribbing on the cast center section
• California Residents: WARNING

AMP Research PowerStep XL Running Boards

From $2,299.99

• Automatic power deploying Running Boards
• Low-Profile Integrated LED Light System
• Rail constructed of 3MM thick walled Mild Steel for MAXIMUM STRENGTH
• Finish: Black
• California Residents: WARNING

AMP Research BedStep2

From $329.99

• Side-mounted bed access step
• Engineered to support loads up to 300 lbs.
• High-strength aluminum alloy components
• Precision stainless-steel pivot pins for rock-solid stability
• Maintenance-free, self lubricating bushings for all-weather performance
• Military-spec, corrosion-resistant, anodized and PTFE coated finish
• Non-slip, glass-reinforced composite step pad–big enough for two large boots
• Easy bolt-on installation
• 3-year/36,000-mile warranty
• Designed and built in America
• California Residents: WARNING

G2 Axle & Gear Chrysler 8.25" Ring and Pinion Sets

From $104.00

• Chrysler 8.25 Inches Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Tone Rings

From $18.19

• Driver or passenger side rear
• Sold individually
• California Residents: WARNING

G2 Slip Yoke Eliminator Kit

From $173.99

• 356-T6 heat treated aluminum tail housing
• 1310 series yoke
• Speedometer drive gear
• Includes all necessary hardware
• G2 Axle & Gear has what you need to make your 4x4 faster, stronger and more reliable
• California Residents: WARNING

G2 Axle & Gear Birfield Axles

From $110.49

• G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
• California Residents: WARNING

G2 Axle & Gear Pinion Yokes

From $44.99

• G2 Axle and Gear offers multiple high quality Pinion Flanges and yokes for various applications with increased strength and reliability. Many of the G/2 yokes are equipped to uses the stronger and popular U-Bolt style mounting that is preferred by racers and off roaders alike.
• California Residents: WARNING

G2 Axle & Gear Dana 35 Ring and Pinion Sets

From $115.49

• Dana 35 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Minor Ring and Pinion Installation Kits

From $35.99

• G2 Axle & Gear Minor Installation Kits include everything you need for a ring & pinion rebuild
• High-quality Timkin ball bearings
• Optimized shim kit for proper spacing
• Replacement pinion nut
• Crush sleeve
• Pinion seal
• Ring gear bolts
• Silicone sealer
• Genuine Loctite thread locking compound
• Gear marking compound
• California Residents: WARNING