AMP Research PowerStep LED Light Kits

From $169.99

• Fits all Power Step applications
• Black anodized and teflon powder coat
• California Residents: WARNING

Synergy Manufacturing HD Metal on Metal Tie Rod End Boot

From $30.00

• Tie Rod End Boots
• Made of tear/wear resistant black NBR and come with retaining springs
• Sold Individually
• California Residents: WARNING

Synergy Manufacturing Dana 30/44 Inner C Gusset Kit 2.5 Inch Axle Housing

From $85.00

• CNC Bent For Precision Fit
• Laser cut for tight clearances
• Heavy Duty Three Side Construction
• Requires Welding: Fits All Jeep JK Dana 30/44 Fronts With 2.5 inch Axle Tubes
• Made in the U.S.A
• California Residents: WARNING

AMP Research PowerStep Trim Strip Kits

From $299.99

• Power Step Trim Strip Kit
• Silver
• Incl. 2 Polished Stainless Steel Strips
• 2 - 79 inch Extrusions
• California Residents: WARNING

Synergy Grab Handles

From $100.00

• Powder coat finish eliminates corrosion that can occur under extreme element. Includes all hardware necessary for a quick and easy installation. Compatible with both hard and soft tops3
• California Residents: WARNING

Synergy Manufacturing Rear Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of rear axle when running a suspension lift
• 100% bolt on
• Rear track bar relocation bracket for lifts taller than 4.5 inch
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Shock Mounts

From $100.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Steering Box Brace

From $10.00

• Steering Box Brace
• Laser cut
• CNC bent
• precision welded
• 1/4" Steel
• Black powder coat finish for maximum corrosion resistance
• 100% Bolt-on installation
• No cutting or drilling required
• Make in the USA
• Note: When using an upgraded 09+ Steering Box, 8559-04 is the steering box brace needed, BUT, modifications will need to be made to the upgraded steering box mounts for proper fitment of the brace.
• California Residents: WARNING

Synergy Manufacturing Adjustable Front Lower Control Arms

From $500.00

AMP Research BedXtender Bracket Kits

From $19.99

• BedXtender HD
• Constructed of lightweight aluminum
• Silver or black powder-coat finish
• Nylon uprights for maximum strength
• U-shape design for increased capacity
• Easy to mount and remove
• 3 year warranty
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Air Compressor Brackets

From $60.00

• Synergy Manufacturing Air Compressor Brackets easily bolt on mount to supply a spot to mount an onboard air compressor under the hood of your JK
• Works with VIAIR 100, 400, & 450 series compressors
• California Residents: WARNING

Synergy Manufacturing 2.0 Inch Air Bump Cans

From $60.00

• Air Bump Mounting Can
• Fits Bilstein, Fox, and SAW 2.0 Air Bumps
• 1026 DOM tubing
• California Residents: WARNING

Synergy Manufacturing Adjustable Steering Column

From $15.00

• Allows for easy adjustment of steering column
• Laser cut from 3/16 inch steel
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End

From $60.00

• Fully greasable sintered metal on metal bushing design
• Tie Rod end boot is made from silicone and polyurethane
• 7/8-18 UNF LH Thread
• Spring loaded bearing design keeps pressure on bearings
• Made in the U.S.A
• California Residents: WARNING

AMP Research BEDXTENDER HD Spacer Kits

From $59.99

• AMP Research Bed X-Tender Mounting Kit
• California Residents: WARNING

Synergy Manufacturing Limit Straps

From $25.00

• Limit Straps
• 8" up to 20" inch Lengths Hole to Hole
• Plated end fittings are made from tough 4130 steel and have 1/2" hole
• U.S. made 1.75" nylon webbing with a 7000 lb. rating and superior flexibility
• Quad wrap (ultra strength)
• Eyelets have an integrated deflector clip to minimize abrasion
• Sold individually
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Radius Axle Link Brackets

From $1,000.00

• Synergy Manufacturing Radius Axle Link Brackets are designed to be used on an axle housing with a 3" diameter
• The link brackets are laser cut and CNC bent from 1/4" carbon steel
• The heavy duty 3 sided construction provides for a VERY rigid bracket and is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildable spherical bearing assemblies
• California Residents: WARNING

Synergy Manufacturing Front Long Arm Lower Control Arm

From $575.00

Synergy Manufacturing Rear Coil Wedges

From $30.00

• Polyurethane Rear Coil Wedges
• Keeps rear springs from bowing irregularly when suspension lifts are used
• Fixes the common problem of the rear springs rubbing the rear trackbar/trackbar bracket when aftermarket CV driveshafts are used
• Corrects the rear axle mount spring perch angle when aftermarket CV driveshafts are used
• Sold As A Pair
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Rear Stretch Bracket Kit

From $1,480.00

• Synergy Manufacturing Rear Stretch Bracket Kit allows 2 Door JK's to be stretched with the Synergy 8 inch stretch kit while retaining the factory style coil spring and shock setup
• The Rear Stretch Bracket Kit Relocates upper coil spring mounts and upper shock mounts back 8 inches
• The Synergy Manufacturing Rear Stretch Bracket Kit is designed to be used in conjunction with Synergy 8032 rear 8 inch stretch brackets and long arms
• California Residents: WARNING

Synergy Manufacturing Front Sway Bar Links

From $115.00

• Sway Bar Links
• Front
• 100% bolt on components
• Made from 11/16" solid 1018 steel and are clear zinc plated for maximum corrosion resistance
• Will Sold as a pair
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing FOX/Synergy Steering Stabilizer Relocation Kit

From $300.00

• Manufactured from high strength 3/16 inch steel
• Grade 8 Hardware
• Powdercoated for corrosion resistance
• Bolt on components
• Fits Right Hand Drive Only
• Made in the U.S.A
• California Residents: WARNING

Synergy Lift Coil Springs

From $260.00

• Lift coil springs
• Synergy coils offer excellent off road performance while preserving ride quality
• Progressively wound
• keeps spring from coming unbound at suspension droop
• Progressively wound spring eliminates annoying spring clanking found on most suspension kits
• Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
• Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
• Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
• Sold in a pair
• California Residents: WARNING

Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING