AMP Research PowerSteps

From $1,249.99

• 5-year/60,000-mile warranty
• 600 pound load capacity per side
• Designed and Made in the USA
• High-strength die-cast, aluminum-alloy linkage components
• Zero-maintenance stainless-steel pivot pins with self-lubricating bushings
• California Residents: WARNING

AMP Research PowerStep Xtreme Running Boards

From $2,199.99

• Electric Power
• Full Strength Die Cast Aluminum
• Corrosion Resistant Finish
• Delivers Substantial Power When Deploying and Withdrawing
• All Weather Functioning
• Hard Working Construction For Superb Traction
• Twin Motors Drive Running Board
• OEM Quality Construction
• LED Illumination When Boards Are Deployed
• 5-Year/60,000 Mile Warranty
• California Residents: WARNING

AMP Research BedSteps

From $329.00

• AMP Research BedStep bumper step
• Fits: Chevy, Ford, Dodge, Jeep and Toyota
• High-strength die-cast, aluminum-alloy linkage components
• 2 and 4-door models
• Military-spec, anodized and Teflon finish to resist corrosion
• Mounts under rear bumper
• 3 year/36,000 mile warranty
• California Residents: WARNING

AMP Research BEDXTENDER HD Max

From $270.99

• Lightweight, super strong 6063 T6 aluminum alloy tubes
• Rugged glass-reinforced nylon composite uprights
• Instantly adds up to 2 feet of length to your truck bed
• Durable black or silver powder coat finish
• Easy to install and easy to remove
• 3-year warranty
• Designed and built in America
• California Residents: WARNING

AMP Research PowerStep XL Running Boards

From $2,299.99

• Automatic power deploying Running Boards
• Low-Profile Integrated LED Light System
• Rail constructed of 3MM thick walled Mild Steel for MAXIMUM STRENGTH
• Finish: Black
• California Residents: WARNING

AMP Research BedStep2

From $329.99

• Side-mounted bed access step
• Engineered to support loads up to 300 lbs.
• High-strength aluminum alloy components
• Precision stainless-steel pivot pins for rock-solid stability
• Maintenance-free, self lubricating bushings for all-weather performance
• Military-spec, corrosion-resistant, anodized and PTFE coated finish
• Non-slip, glass-reinforced composite step pad–big enough for two large boots
• Easy bolt-on installation
• 3-year/36,000-mile warranty
• Designed and built in America
• California Residents: WARNING

AMP Research BEDXTENDER HD Sport

From $329.99

• Tapered v-shape design
• Rounded-rectangle, 6063 t6 aluminum alloy tubes
• Torque-resistant clam-shell design composite uprights
• 3-year/36,000-mile warranty
• Durable silver or black powder-coat finish
• Easy assembly and installation
• Designed and built in america
• California Residents: WARNING

AMP Research PowerStep Plug And Play Kits

From $1,249.99

• 5-year/60,000-mile warranty
• 600 pound load capacity per side
• Designed and Made in the USA
• High-strength die-cast, aluminum-alloy linkage components
• Textured powder coat finish for maximum grip and durability
• Zero-maintenance stainless-steel pivot pins with self-lubricating bushings
• California Residents: WARNING

AMP Research Aluminum Alloy Fuel Doors

From $179.99

• Durable Die-Cast Aluminum Housing
• Corrosion-Resistant Construction
• No-Rattle, Cam-Action Hinge
• Two Finished Available: Powder-Coated Black and Brushed Aluminum
• Easy No-Drill Installation
• Made In The U.S.A.
• Backed By a 3-Year Limited Warranty
• California Residents: WARNING

Synergy Manufacturing High Steer Drag Link

From $450.00

Synergy Manufacturing Wheel Spacers

From $110.00

• Wheel hub centric for increased strength (-H part numbers only)
• CNC machined from billet 6061-T6 aluminum
• Features corrosion resistant red anodizing
• Can be used with factory or after market wheels
• Adapters are 1.50" wide
• Includes Loctite
• Sold as a pair

Synergy Manufacturing Ball Joints

From $250.00

AMP Research PowerStep Plug-n-Play Pass-Through Harnesses

From $119.99

• PowerStep
• Plug and Play Pass Through Harness
• Black
• California Residents: WARNING

Synergy Manufacturing Tie Rods

From $350.00

AMP Research PowerStep Controller Switches

From $104.00

• The toggle switch can be easily installed on the dash and is wired directly to the PowerStep Controller
• Override Retract (Up) keeps the steps up and out of the way, regardless of what you do with the doors
• Automatic Mode (Middle) steps are activated by the doors, deploying when the doors are opened, retracting when they're closed
• Override Deploy (Down) keeps the steps down and ready for use, regardless of what you do with the doors
• California Residents: WARNING

Synergy Manufacturing Axle Housing Inner Sleeve Kit

From $150.00

• Designed to increase the strength of the front Axle housing which is prone to bending when larger off road tires are installed and used off road
• Inner Axle Sleeves add a 57% increase in strength over stock
• The stock axle housing must be drilled and plug welded for installation
• California Residents: WARNING

Synergy Manufacturing Steering Correction Kit

From $425.00

Synergy Manufacturing Skid Plates

From $1,335.00

• Jeep skid plates manufactured from 3/16" crush resistant Grade A-572 Steel plate
• Flush mounted hardware provides a 100% smooth skid surface
• Premium powdercoat finish for maximum corrosion resistance
• Allows access to drain plug without removal
• Made in the USA
• California Residents: WARNING

AMP Research PowerStep Extension Arm Kits

From $169.99

• Compatible only with AMP steps part numbers: 75101, 75104, 75118, 75134 and 76134
• Black anodized and teflon powder coat
• California Residents: WARNING

AMP Research BEDXTENDER Mounting Brackets

From $39.99

• Black
• Creates No Drill Application
• With Quick Latch
• California Residents: WARNING

Synergy Manufacturing Tie Rod Clamps

From $75.00

• CNC machined from 1020 DOM material
• 100% bolt on
• Zinc plated for corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Front Track Bar & Sector Shaft Brace Kit

From $275.00

• Front Track Bar & Sector Shaft Brace Kit
• 2 and 4-door models
• Includes SYN8069-01 & SYN8069-02
• Steering Sector Brace
• Track bar brace
• Laser cut and CNC bent from 3/16" high strength steel
• Gray powder coat finish for maximum corrosion resistance
• Bolt on installation
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Suspension Systems

From $1,070.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.
• All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Front Track Bar Relocation Bracket

From $220.00

• This bracket raises the vehicle's axle side track bar mount
• Heavy-duty
• Special bolt-on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING