DECKED Truck Bed Organizer Storage System (6' 6" Bed) - DG7

• Fitment: Direct Fit
• 6.6' bed length
• Built from 100% recycled HDPE (High Density Polyethylene) co-molded to a galvanized recycled steel subframe
• System payload rating: 2000 lbs evenly distributed on the deck
• Drawer payload rating: 200 lbs per drawer
• System weight: 200 lbs short bed systems, 220-230 lbs standard bed systems
• Two full bed-length drawers
• Note: Drawers do not fully extend. Max drawer extension: 48" for reasons related to physics
• Drawers are weatherproof. System itself is impervious to moisture, extreme UV light exposure and severe temperatures
• Oversized cast aluminum handles for ease of operation with gloves
• No drilling or alteration of vehicle required
• Full line of accessories available to increase your level of awesome
• Will work with a spray-in bed liner, but not a drop-in plastic bed liner
• Will work with a BedRug mat, but not with a BedRug full liner
• If your Ford pickup has a tailgate assist handle mounted on the tailgate, this will interfere with the DECKED unit. You can easily remove the handle, and the tailgate step will not impact the installation or use of your DECKED unit
• The DECKED system is NOT compatible with any in-bed towing packages including 5th Wheel and Gooseneck packages, certain wiring harnesses and aftermarket LED bed lighting
• All DECKED systems now include the following drawer accessories: (1) desert tan D-Box, (1) desert tan Crossbox, (1) Drawerganizer and (2) wide drawer dividers
• California Residents: WARNING
+ View More Specs - View Less Specs

Decked Piecekeepers - AD16MSPK

• Fitment: Universal Fit
• DOES NOT FIT THE DECKED TOOL BOX. Piecekeepers only fit the Drawer System
• Clearance above Piecekeeper is less than 1"
• Accommodates 3 long guns
• May fit in the outboard diagonal slots
• Center slot depth: 4.25"
• 7.79" tall x 18 5/8" wide
• 7.79" tall x 12" wide
• California Residents:WARNING
+ View More Specs - View Less Specs

Artec Industries Nighthawk Boatside Sliders (Bare Steel) - JK2401

• Fitment: Direct Fit
• 07-18 Wrangler JK, 4-Door
• Bare steel
• Made from 3/16 inch and 1/8 inch CNC laser cut and formed steel
• Full Boatside protects down to the fRame
• Internally gusseted
• Distributes load to body mounts, side body and pinch seam
• Angular design perfectly matches Artec NightHawk front and rear fenders
• Made in the U.S.A
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries Nighthawk Sliders Rock Guard Kit (Bare Aluminum) - JK2405

• Fitment: Direct Fit
• 07-18 Wrangler JK, 4-Door
• Bare aluminum
• Aluminum 1/4 in thick
• Easy to sand
• Flat head bolts and locking nuts included
• Retains lift jacking points
• Made in the U.S.A
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries Truss Upper Link Mounts - BR1043

• Fitment: Universal Fit
• Universal application
• Made from 1/4 inch thick mild steel
• 2.0 inch joint mounting width
• Sold As A Pair
• Bare steel
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries Shock Tower with Frame Cutout - BR1052

• Fitment: Universal Fit
• Universal application
• CNC laser cut and bent from 1/4 inch steel
• 1/2 inch mounting hole
• Reservoir pass-through hole for simple routing
• Sold individually
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries JK 1 Ton - Superduty Rear Sterling Axle Swap Kit - JK1050

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• All the brackets necessary for the Superduty rear axle swap into a JK
• 1/4 inch thick mild steel truss and brackets for much higher strength than the factory bracket and other aftermarket brackets
• Precision CNC cut and bent for great Includes all the brackets necessary for a complete axle swap
• Save hours of installation time. Brackets are jigged into truss and set exact position automatically
• Tracbar mount includes 4 locations for those who have aftermarket lifts
• Easily upgradeable for future link geometry changes
• Truss is reinforced using interlocked 1/4 thick gussets for maximum strength and easy assembly
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries JK 1 Ton - Rear 14 Bolt Swap Kit - JK1410

• Fitment: Direct Fit
• 2 and 4-door models
• All the brackets necessary to swap 14 Bolt axle into JK
• 1/4 inch thick mild steel truss and brackets for much higher strength than the factory bracket and other aftermarket brackets
• Precision CNC cut and bent for great Includes all the brackets necessary for a complete axle swap including upper and lower control arm mounts, shock mounts, anti-sway bar mounts, tracbar mount, and coil spring mounts
• Save hours of installation time. Brackets are jigged into truss and set exact position automatically
• Tracbar mount includes 4 locations for those who have aftermarket lifts
• Easily upgradeable for future link geometry changes
• Truss is reinforced using interlocked 1/4 thick gussets for maximum strength and easy assembly
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries 58 x 30 Inch Jig Table - TC0050

• Fitment: Universal Fit
• 58 inch by 30 inch steel table top with capability of top expansion using accessories or additional tables. Great size for both the home and shop user
• Original Quickslot system allows adding accessories quickly and easily. Awkwardly holding up an accessory while you bolt it to the table is a thing of the past
• A large variety of Quickslot accessories available with more coming
• 3/8 inch thick mild steel pickled and oiled table top and 3/16 inch sides and legs
• Cut on a state-of-the-art precision CNC fiber laser for great fitment and clean holes
• 5/8 inch holes in 4 inch pattern with additional 4 inch pattern offset so mounting options are increased
• Bracing is bent on a 135 ton CNC press brake to incorporate more rigidity than flat bracing
• Legs included and are adjustable for a table height from 28 to 41 inches in one inch increments
• 1/2 inch hole in feet accepts use of stem casters or stem foot
• Finer height adjustments capable with leveling casters or feet (not included)
• Internal gussets to stiffen table top and maintain flat surface
• Laser etched part numbers for easy assembly
• Ships flat packed truck freight on a pallet ready for end user assembly
• DIY design reduces cost versus a pre-assembled table
• Includes 2 nutstrips with 1/2 inch nuts
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries 8 Inch Tool Tray for Jig Table - TC1001

• Fitment: Universal Fit
• CNC fiber laser cut and precision CNC bent from 16 gauge steel for a lightweight yet robust solution
• Uses Jig Table's Original Quickslot system to allow quick and easy install and removal
• 7.63 inch x 5.83 inch internal storage area can hold a variety of fabrication supplies
• End flanges are thin enough to allow two tool trays to use the same Quickslot. This means you could have an entire side of a table of trays with no gaps if desired
• Also available in a 4 inch version
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries 4 Inch Tool Tray for Jig Table - TC1002

• Fitment: Universal Fit
• CNC fiber laser cut and precision CNC bent from 16 gauge steel for a lightweight yet robust solution
• Uses Jig Table's Original Quickslot system to allow quick and easy install and removal
• 3.63 inch x 5.83 inch internal storage area can hold a variety of fabrication supplies
• End flanges are thin enough to allow two tool trays to use the same Quickslot. This means you could have an entire side of a table of trays with no gaps if desired
• Also available in a 8 inch version
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries 10 Inch Right Angle for Jig Table - TC1007

• Fitment: Universal Fit
• CNC fiber laser cut and precision CNC Bent from 3/16 inch steel for a robust solution
• Holes in 1 inch increments on one of the 90 degree edges and on the 45 degree angle, slots on the other 90 degree edge
• Angled 45 degree edge features jig holes...not found on competitor's products
• Jig Tabs locate plates for accurate assembly
• 2.37 inch wide flat surface
• Shipped flat packed and requires assembly and welding
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries 8 Inch Vice Mount for Jig Table - TC1020

• Fitment: Universal Fit
• 8 inch works for vices with mounting holes 4 - 8 inches center-on-center diameter
• CNC fiber laser cut and precision CNC bent from 3/16 inch steel for a robust solution
• Holes in 1 inch increments and multiple base plate slotted holes lets you dial in exactly how you want to jig something
• Two angle locking slots...one smooth for allowing any angle, the other with preset holes at 15 degree increments
• Jig tabs locate plates for accurate assembly
• 2.81 inch wide flat surface
• 3/8 inch hardware included
• Shipped flat packed and requires assembly and welding
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries 11 Inch Vice Mount for Jig Table - TC1025

• Fitment: Universal Fit
• 11 inch works for vices with mounting holes 8.1 - 11 inches center-on-center diameter
• CNC fiber laser cut and precision CNC bent from 3/16 inch steel for a robust solution
• Holes in 1 inch increments and multiple base plate slotted holes lets you dial in exactly how you want to jig something
• Two angle locking slots...one smooth for allowing any angle, the other with preset holes at 15 degree increments
• Jig tabs locate plates for accurate assembly
• 2.81 inch wide flat surface
• 3/8 inch hardware included
• Shipped flat packed and requires assembly and welding
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries Jig Plate for Jig Table - TC1050

• Fitment: Universal Fit
• CNC fiber laser cut and precision CNC bent from 3/16 inch steel for a robust solution
• 2 inch hole centers on plate top for lots of mounting options
• Jig tabs locate plates for accurate assembly
• 10 inch x 10 inch wide flat surface
• Shipped flat packed and requires assembly and welding
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries Short Nut Strip for Jig Table - TC1061

• Fitment: Universal Fit
• CNC fiber laser cut and precision CNC bent from 3/16 inch steel for a robust solution
• 1/2 inch - 13 Press Nuts installed on strip
• Works both across 4 inch stretch and from diagonally to center hole
• California Residents: WARNING

Artec Industries Table Extension for Jig Table - TC2001

• Fitment: Universal Fit
• CNC fiber laser cut and precision CNC bent from 3/16 inch steel for a robust solution
• Same 4 inch hole pattern directly extended from jig table top so you have a seamless transition of bolt spacing
• Use the Quickslot system to allow you to quickly and easily mount the extension on the table. No awkwardly mounting it, while bolting it on at the same time
• 30 inch x 14 inch table top making your jig table either 14 inches longer or deeper
• Same 30 inch depth as the jig table
• Ships flat for low cost and assembly and welding required by end user
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries Adjustable Extension for Jig Table - TC2004