Motive Gear GM 8.5 10 Inch Bolt 28 Spline Mini Spool - MS10-28

• Fitment: Universal Fit
• For Use With 28 Spline Axles
• For Use With All Gears
• Use
• Of C Clip Eliminator Recommended
• For Use In Open Differential Case Only
• Not Recommended For Street Use
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries 58 x 30 Inch Jig Table - TC0050

• Fitment: Universal Fit
• 58 inch by 30 inch steel table top with capability of top expansion using accessories or additional tables. Great size for both the home and shop user
• Original Quickslot system allows adding accessories quickly and easily. Awkwardly holding up an accessory while you bolt it to the table is a thing of the past
• A large variety of Quickslot accessories available with more coming
• 3/8 inch thick mild steel pickled and oiled table top and 3/16 inch sides and legs
• Cut on a state-of-the-art precision CNC fiber laser for great fitment and clean holes
• 5/8 inch holes in 4 inch pattern with additional 4 inch pattern offset so mounting options are increased
• Bracing is bent on a 135 ton CNC press brake to incorporate more rigidity than flat bracing
• Legs included and are adjustable for a table height from 28 to 41 inches in one inch increments
• 1/2 inch hole in feet accepts use of stem casters or stem foot
• Finer height adjustments capable with leveling casters or feet (not included)
• Internal gussets to stiffen table top and maintain flat surface
• Laser etched part numbers for easy assembly
• Ships flat packed truck freight on a pallet ready for end user assembly
• DIY design reduces cost versus a pre-assembled table
• Includes 2 nutstrips with 1/2 inch nuts
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries 8 Inch Tool Tray for Jig Table - TC1001

• Fitment: Universal Fit
• CNC fiber laser cut and precision CNC bent from 16 gauge steel for a lightweight yet robust solution
• Uses Jig Table's Original Quickslot system to allow quick and easy install and removal
• 7.63 inch x 5.83 inch internal storage area can hold a variety of fabrication supplies
• End flanges are thin enough to allow two tool trays to use the same Quickslot. This means you could have an entire side of a table of trays with no gaps if desired
• Also available in a 4 inch version
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries 4 Inch Tool Tray for Jig Table - TC1002

• Fitment: Universal Fit
• CNC fiber laser cut and precision CNC bent from 16 gauge steel for a lightweight yet robust solution
• Uses Jig Table's Original Quickslot system to allow quick and easy install and removal
• 3.63 inch x 5.83 inch internal storage area can hold a variety of fabrication supplies
• End flanges are thin enough to allow two tool trays to use the same Quickslot. This means you could have an entire side of a table of trays with no gaps if desired
• Also available in a 8 inch version
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries 10 Inch Right Angle for Jig Table - TC1007

• Fitment: Universal Fit
• CNC fiber laser cut and precision CNC Bent from 3/16 inch steel for a robust solution
• Holes in 1 inch increments on one of the 90 degree edges and on the 45 degree angle, slots on the other 90 degree edge
• Angled 45 degree edge features jig holes...not found on competitor's products
• Jig Tabs locate plates for accurate assembly
• 2.37 inch wide flat surface
• Shipped flat packed and requires assembly and welding
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries 8 Inch Vice Mount for Jig Table - TC1020

• Fitment: Universal Fit
• 8 inch works for vices with mounting holes 4 - 8 inches center-on-center diameter
• CNC fiber laser cut and precision CNC bent from 3/16 inch steel for a robust solution
• Holes in 1 inch increments and multiple base plate slotted holes lets you dial in exactly how you want to jig something
• Two angle locking slots...one smooth for allowing any angle, the other with preset holes at 15 degree increments
• Jig tabs locate plates for accurate assembly
• 2.81 inch wide flat surface
• 3/8 inch hardware included
• Shipped flat packed and requires assembly and welding
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries 11 Inch Vice Mount for Jig Table - TC1025

• Fitment: Universal Fit
• 11 inch works for vices with mounting holes 8.1 - 11 inches center-on-center diameter
• CNC fiber laser cut and precision CNC bent from 3/16 inch steel for a robust solution
• Holes in 1 inch increments and multiple base plate slotted holes lets you dial in exactly how you want to jig something
• Two angle locking slots...one smooth for allowing any angle, the other with preset holes at 15 degree increments
• Jig tabs locate plates for accurate assembly
• 2.81 inch wide flat surface
• 3/8 inch hardware included
• Shipped flat packed and requires assembly and welding
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries Jig Plate for Jig Table - TC1050

• Fitment: Universal Fit
• CNC fiber laser cut and precision CNC bent from 3/16 inch steel for a robust solution
• 2 inch hole centers on plate top for lots of mounting options
• Jig tabs locate plates for accurate assembly
• 10 inch x 10 inch wide flat surface
• Shipped flat packed and requires assembly and welding
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries Short Nut Strip for Jig Table - TC1061

• Fitment: Universal Fit
• CNC fiber laser cut and precision CNC bent from 3/16 inch steel for a robust solution
• 1/2 inch - 13 Press Nuts installed on strip
• Works both across 4 inch stretch and from diagonally to center hole
• California Residents: WARNING

Artec Industries Table Extension for Jig Table - TC2001

• Fitment: Universal Fit
• CNC fiber laser cut and precision CNC bent from 3/16 inch steel for a robust solution
• Same 4 inch hole pattern directly extended from jig table top so you have a seamless transition of bolt spacing
• Use the Quickslot system to allow you to quickly and easily mount the extension on the table. No awkwardly mounting it, while bolting it on at the same time
• 30 inch x 14 inch table top making your jig table either 14 inches longer or deeper
• Same 30 inch depth as the jig table
• Ships flat for low cost and assembly and welding required by end user
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries Adjustable Extension for Jig Table - TC2004

• Fitment: Universal Fit
• CNC fiber laser cut and precision CNC bent from 3/16 inch steel for a robust solution
• Slotted star pattern holes on top for mounting nearly any bolt down tool
• Use the Quickslot system to allow you to quickly and easily mount the Extension on the table. No awkwardly mounting it, while bolting it on at the same time
• 23 inch x 15 inch table top for lots of working room
• Assembly hardware included
• Ships flat for low cost and assembly required by end user
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries Wall Accessory Hanger for Jig Table - TC2011

• Fitment: Universal Fit
• CNC fiber laser cut and precision CNC bent from 1/8 inch steel for a robust solution
• Seven holes for mounting to wall studs
• Utilizes the Quickslot system on the accessories to hold them to the wall
• 28 inches long
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries Front Frame Coil Buckets - TJ2003

• Fitment: Direct Fit
• 97-06 Wrangler TJ/LJ
• For use with 2 inch Hydraulic Bumpstops
• OE height, factory offset
• Four options for customizing your suspension
• CNC Laser cut and CNC bent from heavy-duty 3/16" thick steel
• Gusseted between the coil bucket and shock mount for extra strength
• Factory bumpstop tube has been removed to allow a Hydraulic Bumpstop can to be welded in
• MADE IN THE USA!
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries Truss Upper Link Mounts - BR1043

• Fitment: Universal Fit
• Universal application
• Made from 1/4 inch thick mild steel
• 2.0 inch joint mounting width
• Sold As A Pair
• Bare steel
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries Shock Tower with Frame Cutout - BR1052

• Fitment: Universal Fit
• Universal application
• CNC laser cut and bent from 1/4 inch steel
• 1/2 inch mounting hole
• Reservoir pass-through hole for simple routing
• Sold individually
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries JK 1 Ton - Superduty Rear Sterling Axle Swap Kit - JK1050

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• All the brackets necessary for the Superduty rear axle swap into a JK
• 1/4 inch thick mild steel truss and brackets for much higher strength than the factory bracket and other aftermarket brackets
• Precision CNC cut and bent for great Includes all the brackets necessary for a complete axle swap
• Save hours of installation time. Brackets are jigged into truss and set exact position automatically
• Tracbar mount includes 4 locations for those who have aftermarket lifts
• Easily upgradeable for future link geometry changes
• Truss is reinforced using interlocked 1/4 thick gussets for maximum strength and easy assembly
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries JK 1 Ton - Rear 14 Bolt Swap Kit - JK1410

• Fitment: Direct Fit
• 2 and 4-door models
• All the brackets necessary to swap 14 Bolt axle into JK
• 1/4 inch thick mild steel truss and brackets for much higher strength than the factory bracket and other aftermarket brackets
• Precision CNC cut and bent for great Includes all the brackets necessary for a complete axle swap including upper and lower control arm mounts, shock mounts, anti-sway bar mounts, tracbar mount, and coil spring mounts
• Save hours of installation time. Brackets are jigged into truss and set exact position automatically
• Tracbar mount includes 4 locations for those who have aftermarket lifts
• Easily upgradeable for future link geometry changes
• Truss is reinforced using interlocked 1/4 thick gussets for maximum strength and easy assembly
• California Residents: WARNING
+ View More Specs - View Less Specs

Artec Industries Nighthawk Boatside Sliders (Bare Steel) - JK2401