Dana Spicer Axle Disconnect Actuator Retaining Clips

From $0.99

• Axle Disconnect Actuator Retaining Clip
• Firs All Dana 30, 44 and 60 Front Axles
• California Residents: WARNING

Dana Spicer Axle Locker Sensor

From $75.99

• Tells you if your locker is fully engaged
• California Residents: WARNING

Dana Spicer Axle Disconnect Shift Fork Clips

From $0.99

• Disconnect Shift Fork Clip
• Fits All Dana 30, 44 and 60 Front Axles
• California Residents: WARNING

Dana Spicer Plastic Spindle Thrust Washer

From $2.99

• For use with disc brakes
• California Residents: WARNING

Dana Spicer Spicer Ultra Premium Synthetic Grease

From $31.99

Dana Spicer Axle Disconnect Actuator O-Rings

From $2.99

• Axle Disconnect Actuator O-Ring
• Fits All Dana 30,44 and 60 Front Axles
• California Residents: WARNING

Dana Spicer Axle Disconnect Housing Gasket

From $1.99

• Dana 30 axle with disconnect
• California Residents: WARNING

Dana Spicer Dana 44 Locking Ring

From $2.99

• Dana 30/44/GM 10 Bolt Spindle Nut
• Locking Ring
• Services One Side Only
• California Residents: WARNING

Dana Spicer Performance Adjustable Shocks

From $1,018.99

• Mounting Location: Front
• External Reservoir
• 16 position adjustability
• Hand built by Walker Evans
• Includes billet aluminum remote reservoir brackets
• Sold As: Each
• Made in the U.S.A
• California Residents: WARNING

Dana Spicer Dana 30 Open Differential Carrier Case

From $124.99

• O.E. Quality, fit and finish
• Dana 30
• For use with 3.73 & up gears
• Open differential
• Case only
• Internals sold separately
• California Residents: WARNING

Dana Spicer Dana 35 Pinion Seal Slinger

From $15.99

• The Dana 35 Pinion Head Slinger installs between the outer pinion bearing and pinion seal
• The Pinion Head Slinger prevents oil spray and flooding of the pinion seal
• The Dana Spicer Dana 35 Pinion Seal Slinger is designed to limit the amount of oil that makes way to the pinion seal to help prevent pinion seal leaks
• California Residents: WARNING

Dana Spicer 4WD Vacuum Actuator

From $186.99

• The Dana Spicer 4WD Vacuum Actuator is designed to replace your original, defective shift actuator housing
• The Dana Spicer 4WD Vacuum Actuator is constructed of high quality aluminum just like your original factory one
• The 4WD Vacuum Actuator by Dana Spicer is a direct bolt on and ensures a tight and long lasting fit
• California Residents: WARNING

Dana Spicer Axle Disconnect Shift Forks

From $18.99

• Axle disconnect shift fork
• Fits all Dana 30 and 44 front axles
• California Residents: WARNING

Dana Spicer Pinion Bearings

From $37.99

• Includes 1 bearing and 1 cup. Fits XJ Cherokee, 1985-00 with nondisconnect axle and 1984-91 with disconnect axle.
• California Residents: WARNING

Dana Spicer Differential Cover Bolt

From $2.99

• For use with M30, M35, M20 AND M44 Front Axles. *Will not fit Dana 60 or 70 axles. Not shown in diagram.
• California Residents: WARNING

Dana Spicer Differential Thrust Washer

From $0.99

• Quantity 2 required. *If customer bought the side gear set they do not need to purchase this because it comes with it.
• California Residents: WARNING

Dana Spicer Carrier Shim Kit

From $8.99

• Dana Spicer Differential shim kit is used for adjusting ring and pinion pattern as well as setting bearing preload.
• California Residents: WARNING

Dana Spicer Dana 30 JK Open Differential Assembly

From $207.99

Dana Spicer Dana 35 Open Differential Assembly

From $181.99

Dana Spicer Dana 60 4.10 Ratio Ring and Pinions

From $778.99

• All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
• Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears
• Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing
• California Residents: WARNING

Dana Spicer Dana 60 4.56 Ratio Ring and Pinions

From $391.99

• All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
• Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears
• Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing
• California Residents: WARNING

Dana Spicer 1350 Series U-Joint

From $37.99

• 1350 Series, OSR, outside snap ring dim. 3.625, cap dia. 1.188
• California Residents: WARNING

Dana Spicer Dana 60 5.38 Ratio Ring and Pinions

From $939.99

• All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
• Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears
• Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing
• California Residents: WARNING

Dana Spicer Dana 30 4.10 Ratio Ring and Pinions

From $285.99

• All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications.
• Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears.
• Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing.
• California Residents: WARNING