TeraFlex Steering Stabilizer Relocation Kits

From $84.99

• Moves stabilizer up nearly 2.5
• California Residents: WARNING

TeraFlex Sway Bar Bushing Kit

From $16.99

• This TeraFlex Bushing Ball Replacement Kit is designed to serve as direct replacements for the TeraFlex brand quick disconnect swaybar link bushings
• The polyurethane bushings are specifically designed for easy replacing
• California Residents: WARNING

TeraFlex Alpine RT4 Long Arm Suspension Systems

From $5,248.93

• Adjustable Alpine IR Long Control Arms & Brackets balance front caster angle and pinion angles
• Optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6” lift kits
• Alpine IR Long Control Arms are constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength
• Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop
• Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength with reduced NVH compared to other long arm kits
• Delivers true Rogue Trail (RT) performance
• Dependable performance with zero worries
• Positive, responsive handling with reduced NVH
• Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping
• Maintenance-free IR Bushings improve on- and off-road ride quality and performance
• Adjustable Alpine IR Front Track Bar and Front (3.5”+) and Rear Track Bar Brackets improve steering response
• Centers axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
• Front SpeedBump and rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
• Full range of movement for off-road flex and articulation
• Install and drive simple bolt-on installation – no welding required
• TeraFlex Limited Lifetime Warranty against defects
• Requires aftermarket wheels with 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels
• Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires

TeraFlex Tera44 HD Axle Assemblies

From $1,570.97

• 3.25” O.D. x 0.25” wall axle tube increases torsional strength to resist bending with minimal weight increase
• Asymmetric housing design for extra-long tube side strength
• Pre-installed inner axle seals
• HD forged inner knuckles with greater upper and lower section strength
• Ductile cast iron housing with increased rib gussets
• HD ductile iron differential cover
• Smooth radius bottom design to glide over rocks and obstacles
• Integrated lower control arm skid plates
• High-flow oil passages and bottom oil drain hole for simple fluid changes
• Reinforced front track bar mount (ties into spring pad) for greater strength
• UV protected triple-stage powder coat for corrosion resistance
• 1/4”-thick CNC laser cut axle brackets for extreme strength
• Integrated factory location upper control arm mount
• Pre-installed upper control arm bushings
• Proper pinion angle for lifted applications
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Retains all ESP, ABS, and speedometer sensor capability
• 100% engineered, designed, and built in the USA with new components

Baja Designs LP6 Pro LED Lights

From $489.95

• 6" driving light
• 10,300 lumens
• 200° spread of useable LED light
• Proprietary Direct Ducted Cooling (DDC) technology
• California Residents: WARNING

Baja Designs LP4 Pro LED Lights

From $437.95

TeraFlex Alpine RT3 Suspension Systems

From $3,590.96

• Delivers true Rogue Trail (RT) performance
• Dependable performance with zero worries
• Positive, responsive handling with reduced NVH
• Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping
• Maintenance-free IR Bushings improve on- and off-road ride quality and performance
• Adjustable Alpine IR Front Track Bar and Front (3.5”+) and Rear Track Bar Brackets improve steering response
• Centers axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
• Front SpeedBump and rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
• Full range of movement for off-road flex and articulation
• Install and drive simple bolt-on installation – no welding required
• TeraFlex Limited Lifetime Warranty against defects
• Requires aftermarket wheels with 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels
• Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires

Baja Designs LP9 Series LED Lights

From $463.95

TeraFlex Base Lift Kits

From $1,043.99

• Depending On Lift Height And Vehicle Model Kits Typically Include:
• Dropped Pitman Arm
• Front Sway Bar Disconnects
• Rear Sway Bar Links
• Rear Track Bar Bracket
• Bump Stops
• Brake Line Extension Brackets
• All Necessary Hardware
• California Residents: WARNING

Baja Designs Bumper Light Kits

From $1,001.95

TeraFlex Sport ST3 Suspension Systems

From $1,398.96

• Delivers True Street & Trail (S/T) Performance
• Install & Drive Simple Bolt-On Installation
• Dependable Performance With Zero Worries
• Positive, Responsive Handling
• Reduced Vibration & Harshness
• Preset Sport Flexarms Optimize Correct Caster & Pinion Angles For 3” Lift Kits
• High Quality, Factory Style Bushings Provide Excellent Vibration Damping & Ride Quality With Zero Maintenance
• Front Heavy Duty Adjustable Track Bar
• Speedbump Progressive Bump Stops
• Full Range Of Movement For Off-Road Flex & Articulation
• No Alignment Or Adjustment Required
• Teraflex Lifetime Warranty
• Fits Up To 35” Tires
• California Residents: WARNING

Baja Designs Fog Light Pocket Kits

From $1,014.95

• Dimensions: 3.07" x 2.77" x 3.07"
• Hard anodized and powder coated cast aluminum housing
• Includes a pair of LED Lights, (2) Sets of Jeep JL mounting brackets, plug and play wiring connectors and mounting hardware
• California Residents: WARNING

TeraFlex Sport ST1 Suspension Systems

From $302.99

• Delivers True Street & Trail (S/T) Performance
• Install & Drive Simple Bolt-On Installation
• Dependable Performance With Zero Worries
• Positive, Responsive Handling
• Reduced Vibration & Harshness
• Speedbump Progressive Bump Stops
• No Alignment Or Adjustment Required
• Teraflex Lifetime Warranty
• Fits Up To 33” Tires
• California Residents: WARNING

Baja Designs Wiring Harnesses

From $14.95

Baja Designs OnX6 Rock Guard Light Bar Covers

From $13.46

Baja Designs Fog Light Mounting Kits

From $153.95

Baja Designs S2 Rock Guard Light Covers

From $9.95

TeraFlex Alpine RT6 Long Arm Suspension Systems

From $6,330.92

• HD Drag Link Flip Kit with Front Track Bar Drop Bracket and Frame Brace Kit included
• Corrects steering geometry, eliminates front end shimmy, and reinforces the frame
• Adjustable Alpine IR Long Control Arms and Brackets balance front caster angle and pinion angles
• Optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment
• Alpine IR Long Control Arms are constructed from durable 42mm x 4mm (upper) or 50mm x 5mm (lower) wall DOM tube
• Alpine Long Arm Brackets are gusseted and reinforced for superior strength with reduced NVH compared to other long arm kits
• Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Alpine IR Long Control Arms
• Delivers true Rogue Trail (RT) performance
• Dependable performance with zero worries
• Positive, responsive handling with reduced NVH
• Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping
• Maintenance-free IR Bushings improve on- and off-road ride quality and performance
• HD Forged Adjustable Front and Rear (4”+) Track Bars and Rear Track Bar Bracket improve steering response
• Centers axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
• Front SpeedBump and rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
• Coil spring retainers prevent the springs from unseating during full suspension travel
• Full range of movement for off-road flex and articulation
• TeraFlex Limited Lifetime Warranty against defects
• Requires cutting and welding
• Alignment required
• Recommend driveshaft modifications such as their High-Angle Rzeppa CV Driveshafts or High-Angle Rzeppa CV Joint Kit (# 1744014)
• Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets

TeraFlex Axle Shaft Upgrade Kits

From $151.99

• Constructed from high-strength dual-heat treated 4340 chromoly steel
• Profiled for optimal strength
• Rolled splines
• Compatible with larger Dana 1350-series U-joint
• All 2013-2018 JK Wrangler/Unlimited Dana 30 and Dana 44 axles use the same 1350 series U-joint 5-7166X
• We recommend replacing the inner seal when removing an axle shaft.

Baja Designs XL Laser LED Lights

From $1,029.95

• uService - Replaceable lenses and optics
• ClearView - All the light, right where you need it
• MoistureBlock - Waterproof, rain proof, submersible
• CopperDrive - Only LED driven at 100%
• Lumens: 2,000 Utilizing 4 Laser Chips
• Wattage/Amps: 60w
• Dimensions: 4.43" x 3.65" x 4.43"
• Weight: 2.45 lbs
• Laser Chip Life Expectancy: 2000
• Front Lens: Hard Coated Polycarbonate
• Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
• Bezel: Billet Machined Aluminum
• Hardware and Bracket Material: Stainless Steel
• Exceeds MIL-STD810G (Mil-Spec Testing)
• Built-in overvoltage protection
• IP69K (Waterproof up to 9ft and Pressure Washable)
• IK10 Compliant (Mechanical Impact Testing)

Baja Designs Roll Bar Light Mounting Brackets

From $40.95

Baja Designs XL Pro LED Lights

From $1,141.95

Baja Designs Squadron SAE LED Lights

From $1,014.95

• Limited Lifetime Warranty - Complete purchase protection
• ClearView - All the light, right where you need it
• MoistureBlock - Waterproof, rain proof, submersible
• CopperDrive - Only LED driven at 100%
• 5000K Daylight - Less driver fatigue, natural color
• Lumens: 2,480 utilizing 4 Cree LEDs
• Wattage/Amps: 22W / 1.6A
• Dimensions: 3.07" x 2.77" x 3.07"
• Sold as a pair

Baja Designs Reverse Light Kits

From $270.95