Poison Spyder RockBrawler Rear Bumpers

From $769.99

• The Poison Spyder Rear Stinger Wrangler rear bumper is available in Bare Steel or Black Powder Coat
• 3/16 inch plate steel
• Maximize performance on the toughest trails
• High clearance, multi-faceted design Jeep rear bumper
• California Residents: WARNING

Poison Spyder Crusher Flares

From $599.99

• Poison Spyder Front Crusher Flare kit improves both the aesthetics and durability of your Jeep during your off road adventures
• Crusher Flares are constructed from 1.5 inch X .120 wall DOM tubing in combination with 1/8th and 3/16th high pressure plate steel
• The Crusher Flare kit utilizes stainless countersunk hardware to secure to the Jeeps outer skin and a combination of two heavy duty internal brackets that are coupled to the sub-frame
• Additionally the JK Front Crusher Flare Kit comes with a pair of rubber gaskets that isolates the fender from direct contact with the Jeep paint and body
• The Front Crusher Flare kit comes standard with mounting provisions to replace the factory side marker with an updated LED marker light
• Poison Spyder Front Crusher Flares retain the factory wheel well liner to protect the engine from trail and road debris
• California Residents: WARNING

BAK Industries BAKFlip MX4 Hard Folding Tonneau Covers

From $1,199.99

• Finished cab corner caps featuring a softer seal for a more finished appearance
• Molded and die-cut A-panel and B-side bumpers
• Finished rail end caps
• Secure and durable prop rod clips
• Matte-finished elevator bolts
• Matte Black Clamps
• Durable Aluminum Matte Finish Panels
• Universal Tailgate Operation with Dual Action Seal
• Injection Molded Latch Housing for Long-Term Durability
• Premium Density Foam Core
• Advanced Scratch and Scuff Resistance
• Rated up to 400 lbs. of Evenly Distributed Weight
• 100% Truck Bed Access
• Sleek, Low-Profile Design
• Premium UV Resistance
• EPDM Outer Rail Seals for Maximum Water Resistance
• Automatic Latching Panels
• Integrated Buckle System that secures the open cover in the "Flipped Flat" position without obscuring view from back window
• Extended 3-year Warranty
• California Residents: WARNING

BAK Industries BAKFlip G2 Hard Folding Tonneau Covers

From $1,099.99

• Solid Core Panels with Aluminum Skins
• 100% Truck Bed Access
• Sleek, Low-Profile Design
• Premium UV Resistance, Won’t Fade or Chalk
• Automatic Latching Panels
• 3rd Brake Light Visibility (short and standard beds only)
• Clamp on, No-Drill Installation
• Weather Resistant
• Weight Rated Up to 300 lbs. of Evenly Distributed Weight Compatible with BakBox 2 Tool Box
• Made in the USA
• 2-Year Warranty
• California Residents: WARNING

BAK Industries Revolver X2 Truck Bed Tonneau Covers

From $1,299.99

• Patented Locking Rails Secure the Full Length of the Bed
• Easy to Use Automatic Slam Latch Operates from Either Side
• No Lifting with Easy One-Handed Rolling Design
• No Velcro or Stitching
• 100% Bed Access
• Tough Security
• Full Access to Stake Pocket Holes for Other Accessories
• Rear View Mirror Visibility
• Made in the USA
• 3-Year Warranty
• California Residents: WARNING

Poison Spyder Crusher Corners

From $599.99

• Poison Spyder Crusher Corners are laser cut from high strength 3/16 inch plate steel then carefully roll-formed for a perfect fit to your Jeep's body lines
• Standard Crusher Corners come pre-configured with all of our most popular features including wheel opening, provisions for flush-mounted LED taillights (sold separately) and factory fuel filler opening
• All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws yield a smooth, flat surface to slide over rocks
• Available in Bare Steel or Black Powder Coat,Steel or aluminum, with and without flares and with and without holes for rear lights ther is a fit and style for everybody
• California Residents: WARNING

Poison Spyder Rocker Knockers

From $419.99

• Protect your Jeep rocker panels with Poison Spyder Rocker Knockers by cladding them in rugged, high strength 3/16" plate steel armor
• Manufactured to hug the lines of your Wrangler rocker panel perfectly forming a glove-fit with virtually no loss of ground clearance
• Specifically engineered for most Jeep CJ, YJ, TJ and LJ models
• Bolt holes are countersunk for the included stainless steel flat head hardware, which yields a flat, unobstructed surface to slide over obstacles.
• All mounting hardware is included as well as detailed installation instructions.
• California Residents: WARNING

Poison Spyder Hood Louvers

From $179.99

• Keep under-hood temperatures cooler by allowing hot air to escape through the vents
• The hood louvers allow for improved airflow into the engine bay helping your radiator and fan operate more efficently
• Crafted from quality, thick gauged aluminum sheet and CNC laser cut
• Light weight and corrosion resistant
• Easy installation (template included)
• Adds durability to the flimsy sheetmetal of most stock hoods
• Available in bare aluminum or black powder coat aluminum with corrosion resistant stainless steel fasteners included
• California Residents: WARNING

Poison Spyder Body Mounted Tire Carriers

From $999.99

• Poison Spyder Jeep Spare Tire Carrier
• Bare steel
• CNC laser cut
• Fit up to 40 inch tire and wheel combo on this Jeep tire carrier
• Mount for Hi-Lift jack
• Includes all mounting hardware
• California Residents: WARNING

Poison Spyder BFH Rear Bumpers

From $458.99

• The Poison Spyder Customs BFH™ Wrangler rear bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit.
• Recovery Shackle Tabs are machined from 1" thick plate steel
• This Jeep rear bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep.
• NOTE: Install requires cutting of stock frame rails!
• California Residents: WARNING

Poison Spyder Brawler Full Width Front Bumpers

From $683.99

• Full Width
• Plate Steel Construction
• Brawler Bar
• Easy Installation
• Recessed Fog Lamp Mounts
• Winch Compatibility
• Recovery Shaackle Tabs
• Optional Brawler Lite Skid
• California Residents: WARNING

Poison Spyder Body Armor Kits

From $295.99

• JK Body Armor is manufactured from either 3/16 inch high pressure steel plate or 3/16 inch 6061-T6 aluminum plate
• Available in Bare Steel or Black Powder Coat
• Spyder logo CNC cut into armor
• Bolt holes are countersunk in jeep rocker panel, and stainless steel flat head cap screws are supplied for a clean, flush-surface installation.
• Drilling of the body is required for installation on wrangler rocker panel.
• California Residents: WARNING

BAK Industries RollBAK Hard Retractable Tonneau Covers

From $1,129.99

• 1/2" Thick Aluminum Slats
• Rolls up into Spring Loaded Canister
• Simple Release Cable Opens Cover from Either Side
• Locks with Tailgate
• Sleek, Low-Profile Look
• Mildew Resistant Felt Lined Underside
• Easy-Glide Teflon Rails
• 100% Stake Pocket Hole Access for Other Accessories
• Made in the USA
• 2-Year Warranty
• California Residents: WARNING

Poison Spyder Windshield Light Bar Mounts

From $249.99

• Available in black powder coat, bare steel and aluminum
• Attaches to a-pillar
• Made from 3/16 inch steel plate
• Includes rubber liners to avoid paint damage
• California Residents: WARNING

Poison Spyder Hood Logo Decals

From $59.99

• Available in black, silver, white or red
• California Residents: WARNING

BAK Industries BAKFlip F1 Hard Folding Tonneau Covers

From $1,249.99

• Advanced Impact Resistant Construction
• Premium Density Foam Core
• Heavy-Duty Hardware and Components
• Upgraded Latch Housing for Long-Term Durability
• Weight Rated up to 400 lbs. of Evenly Distributed Weight
• Extended 3-Year Warranty
• FRP (Fiberglass Reinforced Polymer)
• EPDM outer rail seals for maximum water resistance
• 100% Truck Bed Access
• Sleek, Low-Profile Design
• Automatic Latching Panels
• 3rd Brake Light Visibilty (short and standard beds only)
• UV resistant for long-term durability
• BakBox 2 Tool Box Compatible
• California Residents: WARNING

Poison Spyder RockBrawler Bumpers

From $579.99

• This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
• The ends of the bumper extend far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access to vertical obstacles.
• The two D-ring shackle mounts are CNC-machined from 1 inch plate steel to provide brute strength for the most demanding recovery operations.
• Accepts most major manufacturer's winches up to 15,000 lbs. capacity
• Recessed light mounts are provided for retention of the factory fog lamps or aftermarket off-road lamps
• California Residents: WARNING

Poison Spyder Windshield Decals

From $59.99

• Available in black, silver, white or red
• California Residents: WARNING

BAK Industries BAKFlip FiberMax Tonneau Covers

From $1,149.99

• FRP (Fiberglass Reinforced Polymer) Panel Top Skin
• New Buckle System Secures Cover in Open Position
• Patented Rail Design with Load-Bearing Flange to Support Heavy Loads
• EPDM Outer Rail Seals for
• Maximum Water Resistance
• UV Resistant for Long-Term Durability
• 100% Bed Access
• Quick-Release Attachment System
• Compatible with BakBox 2 Tool Box
• Weight Rated up to 300 lbs. of Evenly Distributed Weight
• Made in the USA
• 2-Year Warranty
• California Residents: WARNING

Poison Spyder LED Tail and Reverse Lights with Wiring Harnesses Kits

From $29.99

• Exclusive Plug-N-Play Design
• Supports 4 Inch Round LED Tailights
• Supports 2 1/2 Inch Round LED Back-Up lamps
• Supports LED License Plate and Third Brake Light
• California Residents: WARNING

BAK Industries Revolver X4ts Hard Rolling Truck Bed Covers

From $1,549.99

BAK Industries Revolver X4s Truck Bed Cover

From $1,399.99

BAK Industries Vortrak Retractable Tonneau Cover

From $970.99

• Stylish matte finish
• 1/2-inch thick aluminum slats
• Rolls up into spring loaded canister
• Easy to operate cable release opens cover from driver or passenger side
• Locks with tailgate
• Slides easily along rails and has adjustable locking positions
• Strong and secure aluminum slats are durable and dent resistent
• Retracts fully when needing to transport large cargo
• 2-year warranty
• California Residents: WARNING

Poison Spyder Crawler Skid Plates

From $329.99

• Bolts to bottom of Poison Spyder JK Crawler series Front Bumpers (sold separately)
• Covers factory "crash bar" and protects stock Jeep electrical swaybar disconnect mechanism
• CNC laser cut from 3/16" plate steel
• Precision brake-formed for a perfect fit
• SpyderShell™ Armor Coat semi-gloss black finish
• California Residents: WARNING