Poison Spyder Brawler Full Width Front Bumper with Shackle Tabs (Bare) - 17-64-020-D

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Bare steel
• Full-width, multi-faceted design protects lower grille and extends to outer edge of stock flares
• CNC laser cut from 3/16"plate steel
• Precision brake-formed for a perfect fit
• Recessed light buckets accept OE fog lamps or Rigid Industries D-Series lights by use of adapter plate (sold separately)
• High clearance recovery shackle tabs CNC machined from 1" thick plate steel
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Stubby Front Bumper with Pre-Runner Guard (Bare) - JL18-B4752-B

• Fitment: Direct Fit
• Bare steel finish
• 3/16 inch steel construction
• Comes with pre-runner guard
• Narrow stubby design
• Integrated D-rings
• Integrated tow hooks
• Winch ready with included winch tray
• Integrated fog light housing using 3x3 Pod lights or factory fog lights (Not compatible with OE Steel bumper fog lights)
• Easy installation
• Weight 75lbs
• Height 22 inches
• Width 23 inches
• Length 47 inches
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Poison Spyder RockBrawler Rear Bumper with Shackle Tabs (Bare) - 14-61-010-D

• Fitment: Direct Fit
• Bare steel
• 3/16 inch thick plate steel
• Has built-in high clearance hitch receiver
• Has a built-in step/recess to provide access rear cargo
• Shackle tabs are 1 inch thick steel billet
• Universal mounting system
• California Residents: WARNING
+ View More Specs - View Less Specs

Poison Spyder RockBrawler Front Bumper with Brawler Bar and Shackle Tabs (Bare) - 14-59-010-DB

• Fitment: Direct Fit
• Bare steel
• Mid-width high clearance bumper
• 3/16 inch plate steel
• CNC laser-cut
• Extends far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access
• California Residents: WARNING
+ View More Specs - View Less Specs

Poison Spyder BFH II Rear Bumper with Shackle Tabs (Bare) - 14-61-030

• Fitment: Direct Fit
• Bare steel
• 3/16 inch thick plate steel
• No provisions for a spare tire carrier
• Shackle tabs are 1 inch thick plate steel
• Universal mounting system comes with captured hardware already in place for installation
• California Residents: WARNING
+ View More Specs - View Less Specs

Poison Spyder BFH Front Bumper with Brawler Bar and Shackle Tabs (Bare) - 14-16-020-DB

• Fitment: Direct Fit
• Bare steel
• 3/16 inch plate steel
• No wider than the frame rails
• Brawler Bar extends 7.4 inch forward from the front edge of the bumper
• 9.8 inch high from the top surface of the bumper
• Shackle tabs are 1 inch thick plate
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Vengeance Front Bumper (Raw) - DR19-V4451-B

• Fitment: Direct Fit
• Ram 2500-3500
• Raw finish
• Made of 11 guage US steel
• Overall design and fit is "high and tight" to the contours of the vehicle
• Provides far greater tire clearance
• Lower cutout to provide increased airflow
• Allows for an integrated 20 inch LED light bar in the center
• Mounting options on each side for (2) 2x2 Dually lights to give you maximum LED light coverage
• Lights not included
• Sensor compatible
• Sensors optimized for vehicles with suspension lifts - stock height trucks may require tuning the sensor mount and will require special care
• Complete bolt-on application
• Mounting brackets included
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Vengeance Front Bumper with Pre-Runner Guard (Bare) - DR19-V4452-B

• Fitment: Direct Fit
• Ram 2500-3500
• Bare steel
• 11 guage US steel construction
• Comes with a pre-ruuner guard
• Overall design and fit is "high and tight" to the contours of the vehicle
• Provides far greater tire clearance
• Lower cutout to provide increased airflow
• Allows for an integrated 20 inch LED light bar in the center
• Mounting options on each side for (2) 3x3 Dually lights to give you maximum LED light coverage
• Lights not included
• Sensor compatible
• Sensors optimized for vehicles with suspension lifts - stock height trucks may require tuning the sensor mount and will require special care
• Complete bolt-on application
• Mounting brackets included
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Premium Rear Bumper (Bare) - DR19-W4251-B

• Fitment: Direct Fit
• Ram 1500
• Bare steel finish
• Integrated steps on either side of the tailgate
• 3/16 inch U.S. steel construction
• D-Rings are cut with 3/4 inch steel and will accept up to a 7/8 inch shackle
• Retain OEM receiver hitch and wiring location
• Pre-Cut openings to utilize factory sensors
• Weight: 115 lbs.
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper (Bare) - DR19-X4251-B

• Fitment: Direct Fit
• Bare finish
• 3/16 inch plate steel construction
• Aggressive design
• Winch ready for Warn Zeon 12 or lower
• Center mount accommodates a 30 inch light bar (not included)
• Removable inserts that can be painted
• Side mounting slots and tabs for various light options (lights not included)
• Provides far more tire clearance
• Lower cutout for increased airflow
• Integrated sensor holes
• Warn Zeon Control Box Relocation is required
• Does not work with Rebel, Express, or Sport models
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper with Pre-Runner Guard (Bare) - DR19-X4252-B

• Fitment: Direct Fit
• Bare finish
• 3/16 inch plate steel construction
• Front bumper with Pre-runner guard
• Aggressive design
• Winch ready for Warn Zeon 12 or lower
• Center mount accommodates a 30 inch light bar (not included)
• Removable inserts that can be painted
• Side mounting slots and tabs for various light options (lights not included)
• Provides far more tire clearance
• Lower cutout for increased airflow
• Integrated sensor holes
• Integrated D-ring mounts
• Warn Zeon Control Box Relocation is required(PN 89960 or 89970)
• Accommodates factory 360 camera (minor camera interference with Pre-Runner guard)
• Weight: 180-200 lbs
• Does not work with Rebel, Express, or Sport models
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Stubby front Bumper (Bare) - JL18-B4751-B

• Fitment: Direct Fit
• Bare steel finish
• 3/16 inch steel construction
• Non-guard option
• Narrow stubby design
• Integrated D-rings
• Integrated tow hooks
• Winch ready with included winch tray
• Integrated fog light housing using 3x3 Pod lights or factory fog lights (Not compatible with OE Steel bumper fog lights)
• Easy installation
• Weight 75lbs
• Height 22 inches
• Width 23 inches
• Length 47 inches
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper (Bare Steel) - JL18-X4651-B

• Fitment: Direct Fit
• Bare steel finish
• Pre-runner guard not included
• Aggressive design
• Winch ready for Warn Zeon 12 or smaller
• Two side openings allow light options
• Customizable removable inserts for different color options
• Works with Rigid industry 3x3 pod lights or SR 6" series
• Center mount accommodates a 30" light bar (not included)
• Pre-cut openings to utilize factory sensors
• Weight: 175 lbs.
• 3/16 plate U.S. steel construction
• 100% Made in the USA
• Warn Zeon control box relocation is required to run 30" light bar
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper with Pre-Runner Guard (Bare Steel) - JL18-X4652-B

• Fitment: Direct Fit
• Bare steel finish
• Pre-runner guard included
• Aggressive design
• Winch ready for Warn Zeon 12 or smaller
• Two side openings allow light options
• Customizable removable inserts for different color options
• Works with Rigid industry 3x3 pod lights or SR 6" series
• Center mount accommodates a 30" light bar (not included)
• Pre-cut openings to utilize factory sensors
• Weight: 175 lbs.
• 3/16 plate U.S. steel construction
• 100% Made in the USA
• Warn Zeon control box relocation is required to run 30" light bar
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Rear Bumper (Bare Steel) - JT20-Y1950-B

• Fitment: Direct Fit
• Bare steel finish
• Aggressive styling
• Integrated tow hooks and d-ring mounts
• Double rung side step
• Fab Fours' signature knife edge design
• Ease of installation
• 16 gauge removable skin
• Sensor compatible
• 2 integrated pod mounts for reverse lights
• Stainless steel mounting hardware
• 11 gauge steel construction
• Weight 100 lbs per side
• Height 13"
• Width 8"
• Length 70"
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Stubby Front Bumper with Guard (Bare) - JK07-B1952-B

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Bare finish
• Made from 3/16 inch US steel
• Stubby design For maximum tire clearance
• Has front bar for extra protection
• Winch ready
• Winch tray included
• Integrated D-rings and tow hooks
• Integrated fog light housing- retain -factory fog lights- or 3X3 inch pod lights
• Simple and quick installation
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Vengeance Front Bumper (Bare) - JK07-D1851-B

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Bare steel
• 11 gauge US steel construction
• Overall design and fit is “High and Tight” to the contours of the vehicle
• Weight: 65 lbs
• Accepts a 20" light bar in center (light bar sold separately)
• Mounting options on each side for (2) 3x3 LED lights
• Lower cutout to provide increased airflow
• Provides far greater tire clearance
• Keeps factory tow hooks (red hooks not included)
• Will not accept a winch
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Vengeance Front Bumper with Pre-Runner Guard (Bare) - JK07-D1852-B