Welcome Guest
SHOP BY CATEGORY
SHOP BY BRAND
SHOP BY VEHICLE
Sales Support 877-474-4821
877-260-5452
Call Our Stateside Experts!
Bare Mid Bare
Bare Mid On Sale
5 Product Groups
Switch to View Products
Road Armor Stealth Series Front Bumpers
Road Armor Front Stealth BumperFrom $981.16
- Proudly made in Texas, USA
- Hot rolled and laser cut 3/16 inch Plate Steel
- 1/4-inch-thick internal mounting brackets and gussets
- all guard tubing is .120-wall
- 5 Stage Powdercoat Finish - Highly scratch resistant
- Lights are not included
- Combat Proven and Trusted by the United States Military, life time guarantee against breakage
- California Residents: WARNING
From $981.16
4.1
4.1
(3083)
Fab Fours Winch Front Bumpers
Fab Fours Winch Front BumpersFrom $909.99
- Provides more tire clearance
- Winch ready (Accepts up to 12,000 lb. winches or smaller)
- 3/4 inch D-ring mounts
- 1/4 inch Boxed mounting system with adjustability to allow a custom fit
- Fab Fours signature injection molded light housings
- Fab Fours 90mm fog and 60mm turn indicator lights included FREE with the bumper!
- 2 Stage matte black powder coat or bare steel (-B instead of -1)
- 3/16 inch Steel construction
- 100% Made in the USA
- California Residents: WARNING
From $909.99
4.4
4.4
(81)
On Sale
Poison Spyder RockBrawler Bumpers
Poison Spyder Customs RockBrawler Front BumperFrom $579.99
- This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
- The ends of the bumper extend far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access to vertical obstacles.
- The two D-ring shackle mounts are CNC-machined from 1 inch plate steel to provide brute strength for the most demanding recovery operations.
- Accepts most major manufacturer's winches up to 15,000 lbs. capacity
- Recessed light mounts are provided for retention of the factory fog lamps or aftermarket off-road lamps
- California Residents: WARNING
From $579.99
5.0
5.0
(1)
Artec Industries Nighthawk Front Bumpers
Artec Industries Nighthawk Front BumpersFrom $1,075.68
- Made in the USA from 1/8 inch CNC laser cut and formed steel
- Internally gusseted for ultimate strength
- High clearance design hugs factory frame for no loss of clearance or departure angle
- 3/4 inch thick high strength alloy steel frame brackets double as shackle mounts
- High Clearance ends ensure you don’t get hung up on rocks
- Available in bare steel to allow customizable color coordination
- Contoured to perfectly fit the subtle curves of your Jeep
- California Residents: WARNING
From $1,075.68
DV8 Offroad Front Bumpers
DV8 Offroad Front BumpersFrom $899.99
- 2 stage powder coat finish
- Modular 2 & 3 piece design
- Steel construction
- Accomodates up to a 12,500 lbs Winch
- Cut out holes for lights
- D-ring shackle mounts
- DV8 no hassle warranty
From $899.99
4.0
4.0
(75)
7 Products
Switch to View Product Groups
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Poison Spyder RockBrawler Front Bumper with Brawler Bar and Shackle Tabs (Bare) - 14-59-010-DB
- Fitment: Direct Fit
- Bare steel
- Mid-width high clearance bumper
- 3/16 inch plate steel
- CNC laser-cut
- Extends far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
SHOP 4WP's HUGE SELECTION
Qualifies for Free Shipping
$579.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
Poison Spyder RockBrawler Front Bumper with Brawler Bar and Shackle Tabs (Bare) - 14-59-010-DB
Part #: PSC14-59-010-DB$579.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Bare steel
- Mid-width high clearance bumper
- 3/16 inch plate steel
- CNC laser-cut
- Extends far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
SHOP 4WP's HUGE SELECTION
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
.jpg)
DV8 Offroad Pocket Front Bumper - FBJL-04
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 2 left in Stock ?- Fitment: Direct Fit
- Optional included winch plate
- Accommodates factory 4-hole mounted fog lights
- Can mount up to a 13" light bar above or below bull bar
- Pocketed clevis mounts for 3/4" d-rings
- Bolt-on installation - no cutting required
- (3) M12 nuts for accessories such as GoPro mounts or pod lights
- Note: not compatible with the factory skid plate *** however, this is compatible with our sway bar disconnect skid plate (SPJL-01)
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$899.99
$989.99
Only 2 left in Stock ?
$899.99
$989.99
Only 2 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 2 left in Stock ?- Fitment: Direct Fit
- Optional included winch plate
- Accommodates factory 4-hole mounted fog lights
- Can mount up to a 13" light bar above or below bull bar
- Pocketed clevis mounts for 3/4" d-rings
- Bolt-on installation - no cutting required
- (3) M12 nuts for accessories such as GoPro mounts or pod lights
- Note: not compatible with the factory skid plate *** however, this is compatible with our sway bar disconnect skid plate (SPJL-01)
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Road Armor Stealth Front Mid-width Winch Bumper (Bare Steel) - 5182F0Z
- Fitment: Direct Fit
- Bare finish
- 3/16 inch heavy duty steel construction
- 1/4 inch gusseting and internal bracketry
- CNC laser cut
- Precision brake formed
- Welded by crafstmen inside and out
- Superior foot forward winch mount fits a WARN M12000, Smittybilt XRC
- Recessed light ports for auxiliary lighting
- Winch and lights are not included
- Direct bolt on design
- Lifetime structural warranty
- Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
$981.16
$1,177.40
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$981.16
$1,177.40
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Bare finish
- 3/16 inch heavy duty steel construction
- 1/4 inch gusseting and internal bracketry
- CNC laser cut
- Precision brake formed
- Welded by crafstmen inside and out
- Superior foot forward winch mount fits a WARN M12000, Smittybilt XRC
- Recessed light ports for auxiliary lighting
- Winch and lights are not included
- Direct bolt on design
- Lifetime structural warranty
- Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Artec Industries Venture Front Bumper - TY7001
- Fitment: Direct Fit
- Replaces 5th Generation Toyota 4Runner factory center section of the bumper*
- Low profile design mimics the looks of the factory bumper
- Made From CNC laser cut 3/4 inch, 3/16 inch and 1/8 inch thick steel and CNC formed for great fit and high strength
- Designed from factory CAD files for great and ultra precise fit with no large gaps
- 3/4 inch thick recovery tabs located higher than most for better ground clearance
- Recessed fairlead mount to keep winch components protected
- Fits Single row 30 inch light bar
- Fits most non-integrate solenoid winches and some integrated solenoid winches including Superwinch EXP and Warn Zeon series
- Winch access holes make it easy to use your winch
- Frame plate hooks make it easy to mount your bumper for mockup and bolting on
- Large Frame plate gussets transfer front of bumper directly to frame
- Multiple winch mounting holes for different offset winches
- Available in Bare Steel
- Made in USA
- Note: *requires trimming. Please refer to install guide for trimming locations. Artec not responsible for improper trimming.
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$1,075.68
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$1,075.68
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Replaces 5th Generation Toyota 4Runner factory center section of the bumper*
- Low profile design mimics the looks of the factory bumper
- Made From CNC laser cut 3/4 inch, 3/16 inch and 1/8 inch thick steel and CNC formed for great fit and high strength
- Designed from factory CAD files for great and ultra precise fit with no large gaps
- 3/4 inch thick recovery tabs located higher than most for better ground clearance
- Recessed fairlead mount to keep winch components protected
- Fits Single row 30 inch light bar
- Fits most non-integrate solenoid winches and some integrated solenoid winches including Superwinch EXP and Warn Zeon series
- Winch access holes make it easy to use your winch
- Frame plate hooks make it easy to mount your bumper for mockup and bolting on
- Large Frame plate gussets transfer front of bumper directly to frame
- Multiple winch mounting holes for different offset winches
- Available in Bare Steel
- Made in USA
- Note: *requires trimming. Please refer to install guide for trimming locations. Artec not responsible for improper trimming.
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Artec Industries Venture Bumper (Bare) - TY7002
- Fitment: Direct Fit
- Toyota 4Runner 5th Gen
- Not compatible with Limited 4 Runner models
- Bare steel finish
- Replaces factory center section of the bumper
- Low profile design mimics the looks of the factory bumper
- Made From CNC laser cut 3/4", 3/16" and 1/8" thick steel
- Recessed fairlead mount to keep winch components protected
- Fits most non-integrate solenoid winches and some integrated solenoid winches including Superwinch EXP and Warn Zeon series
- Winch access holes make it easy to use your winch
- Frame plate hooks make it easy to mount your bumper for mockup and bolting on
- Requires trimming
- Please refer to install guide for trimming locations
- Artec not responsible for improper trimming
- Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$1,075.68
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$1,075.68
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Toyota 4Runner 5th Gen
- Not compatible with Limited 4 Runner models
- Bare steel finish
- Replaces factory center section of the bumper
- Low profile design mimics the looks of the factory bumper
- Made From CNC laser cut 3/4", 3/16" and 1/8" thick steel
- Recessed fairlead mount to keep winch components protected
- Fits most non-integrate solenoid winches and some integrated solenoid winches including Superwinch EXP and Warn Zeon series
- Winch access holes make it easy to use your winch
- Frame plate hooks make it easy to mount your bumper for mockup and bolting on
- Requires trimming
- Please refer to install guide for trimming locations
- Artec not responsible for improper trimming
- Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Fab Fours Winch Mount Front Bumper (Bare Steel) - TT22-N5451-B
- Fitment: Direct Fit
- Bare steel
- 3/16" steel plate construction
- Winch ready for a WARN Zeon 12
- Allows for Toyota Safety Sense
- Allows for a 30-inch center light bar (single or double)
- Integrated d-ring mounts
- Weight: 77 lbs
- Made in the USA
- Actual product may vary photo used for illustration purposes (pictured in black powder coat)
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Save Up To $250 Off Install When You Purchase And Install Select Warn Winches With Select Fab Fours Winch Bumpers - VISIT LOCAL 4WP
Lowest Price! Guaranteed! Request A Price Match
$909.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$909.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Bare steel
- 3/16" steel plate construction
- Winch ready for a WARN Zeon 12
- Allows for Toyota Safety Sense
- Allows for a 30-inch center light bar (single or double)
- Integrated d-ring mounts
- Weight: 77 lbs
- Made in the USA
- Actual product may vary photo used for illustration purposes (pictured in black powder coat)
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Save Up To $250 Off Install When You Purchase And Install Select Warn Winches With Select Fab Fours Winch Bumpers - VISIT LOCAL 4WP
Lowest Price! Guaranteed! Request A Price Match
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Fab Fours Winch Mount Front Bumper with Pre-Runner Guard (Bare Steel) - TT22-N5452-B
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 2 left in Stock ?- Fitment: Direct Fit
- Includes Pre-Runner Guard
- Bare steel
- 3/16" steel plate construction
- Winch ready for a WARN Zeon 12
- Allows for Toyota Safety Sense
- Allows for a 30-inch center light bar (single or double)
- Integrated d-ring mounts
- Weight: 77 lbs
- Made in the USA
- Actual product may vary photo used for illustration purposes (pictured in black powder coat)
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Save Up To $250 Off Install When You Purchase And Install Select Warn Winches With Select Fab Fours Winch Bumpers - VISIT LOCAL 4WP
Lowest Price! Guaranteed! Request A Price Match
$949.99
Only 2 left in Stock ?
Fab Fours Winch Mount Front Bumper with Pre-Runner Guard (Bare Steel) - TT22-N5452-B
Part #: FFITT22-N5452-B$949.99
Only 2 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 2 left in Stock ?- Fitment: Direct Fit
- Includes Pre-Runner Guard
- Bare steel
- 3/16" steel plate construction
- Winch ready for a WARN Zeon 12
- Allows for Toyota Safety Sense
- Allows for a 30-inch center light bar (single or double)
- Integrated d-ring mounts
- Weight: 77 lbs
- Made in the USA
- Actual product may vary photo used for illustration purposes (pictured in black powder coat)
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Save Up To $250 Off Install When You Purchase And Install Select Warn Winches With Select Fab Fours Winch Bumpers - VISIT LOCAL 4WP
Lowest Price! Guaranteed! Request A Price Match
