DECKED Truck Bed Storage Systems

From $1,499.99

• Built from 100% recycled high density polyethylene co-molded to a steel sub frame (most of the steel is also recycled)
• No drilling needed
• system attaches to the existing tie-downs in your truck
• Precise fit ensures no gaps between the deck and sidewalls of your truck bed
• Drawers are engineered to hold 200 lbs. each while still rolling smoothly
• Oversized cast aluminum handles
• Full bed-length drawers roll smoothly on sealed bearing wheels
• Drawers are weatherproof
• Ammo cans provide four areas of additional storage on either side of the wheel wells
• flip the lids and you have eight beverage holders or a handy place to store nuts, bolts, or screws when working on or near your truck
• Stainless steel edge guard ruler and bottle opener
• DECKED can handle UV light, moisture, and extreme heat or cold
• System can be installed easily and can be removed in about 20 minutes
• Three year limited warranty.
• California Residents: WARNING

Bartact Paracord Grab Handles

From $29.99

DECKED Core Trax Tie-Down Sets

From $100.00

• Set of two
• Four core locks
• Silver
• 6063 T5 aluminum
• Hardware included

DECKED Drawer Dividers

From $20.00

• Our dividers come in a set of four and are made from polypropylene. They are light gray in color to make finding your stuff easier. The dividers are 8 inch tall and fit, into four mounting positions within the DECKED drawers, allowing you to customize the drawers for your gear. Each divider has cut-outs that allow you to secure your gear with handy tie-down points. The dividers can be taken out or re-positioned with ease.
• California Residents: WARNING

DECKED Truck Bed Organizers

From $30.00

• Built from 100% recycled high density polyethylene co-molded to a steel sub frame (most of the steel is also recycled)
• No drilling needed
• system attaches to the existing tie-downs in your truck
• Precise fit ensures no gaps between the deck and sidewalls of your truck bed
• Drawers are engineered to hold 200 lbs. each while still rolling smoothly
• Oversized cast aluminum handles
• Full bed-length drawers roll smoothly on sealed bearing wheels
• Drawers are weatherproof
• Ammo cans provide four areas of additional storage on either side of the wheel wells
• flip the lids and you have eight beverage holders or a handy place to store nuts, bolts, or screws when working on or near your truck
• Stainless steel edge guard ruler and bottle opener
• DECKED can handle UV light, moisture, and extreme heat or cold
• System can be installed easily and can be removed in about 20 minutes
• Three year limited warranty.
• California Residents: WARNING

DECKED Truck Bed Storage Accessories

From $131.99

Bartact Roll Bar Barrel Bags

From $24.99

• Available in different colors
• Fits both padded and non-padded roll bars
• Made in the U.S.A.

Bartact FlashLight Holders

From $19.99

• Universal holder
• Fits both padded and non-padded roll bars
• Highest quality
• PALS webbing as a MOLLE accessory
• Match your Flashlight Holder to the color of your vehicle, and/or any Bartact or Trek Armor seat covers and accessories
• Proudly made in the U.S.A.

Bartact Fire Extinguisher Holders

From $29.99

• Works with fire extinguishers with holding capacity of 2.5 lbs
• Fits around padded and non-padded roll bars
• PALS webbing as a MOLLE accessory
• Made in the U.S.A.

Bartact Seat Belt Harnesses

From $119.99

• All black hardware
• Easy adjusters
• Removable pads
• Removable sternum strap
• Innovative shoulder Mod-Loop system for attachments, hydration tubes, etc

Bartact Tactical Series Seat Covers

From $419.99

• Tactical Series Seat Covers
• MOLLE pouches which can be mounted anywhere on the PALS system within the seat covers
• Headrest covers included with all Tactical seat covers
• Made from waterproof-backed polyester
• Interior sleeve which can accommodate a lumbar support (not included)
• Proudly made by hand in the U.S.A.

Bartact Winch Covers

From $69.99

• Front opening closes to protect your synthetic winch line from sun exposure and/or your steel cable from moisture
• The front opening lifts up and attaches to the rear of the cover while the winch is in use
• An 'L-shaped' zipper on the driver side allows easy access to electrical and spool mechanism without having to remove the cover
• 1/4" open-cell foam padding throughout in order to help hold shape and allow moisture to dissipate
• Rear mesh backing to also aid in moisture evaporation
• Made in the U.S.A.

Bartact Bull Strap Tie Downs

From $10.99

• 2,500 lb rating (833 lb will) on all hardware
• 3,300 lb polyester webbing (Strongest in the industry)
• 12' Length (The longest standard in the industry)
• Black epoxy hardware
• Coated S-hooks

Bartact Universal Between the Seat Bag & Pet Dividers

From $49.99

• 4 exterior mesh pockets - 2 front & 2 rear
• Large enough to fully fit large cell phones or water bottles
• A large interior velcro-top compartment
• Fade resistant
• Same fabric and materials used for Bartact seat covers
• Available with an interchangeable top color
• Quick release
• All bags come with modular side release buckles, allowing you to take them with you easily wherever you might go
• Proudly made in the U.S.A.

Bartact Off Road Jack Covers

From $109.99

• Off road jack cover or rifle case
• Bartact UV protected & waterproof outer fabric
• Heavy duty 22oz & velcro loop interior liner
• Multiple attachment points on rear
• Lockable tabs with grommet holes to protect from theft on your vehicle
• Lockable zipper when used as a rifle case
• Large exterior pocket
• PAL/MOLLE for additional storage
• Will not work with Jacks mounted at the base, the base needs to be accessible in order for the cover to attach correctly
• Proudly made in the U.S.A.

Bartact PALS/MOLLE Accessories

From $19.99

• Adjustable elastic storage straps
• D-Ring quick release kits
• Swivel hooks
• Pouches
• Works with any PALS webbing system and can be located in any MOLLE compatible area

Bartact Paracord Zipper Pulls

From $14.99

• 550 Nylon paracord
• Pick from over 25 colors
• Made in the U.S.A.

Bartact Seat Belt Covers

From $24.99

• 1/4" padded
• UV resistant
• Waterproof fabric
• Features PALS webbing for MOLLE gear
• Made in the U.S.A.
• Sold as a pair

Bartact Air Lumbar Support for Bartact Seat Covers

From $39.99

• Air lumbar seat support
• Manual pump and release valve for Bartact seat covers
• All Bartact seat covers have pockets sewn in to accommodate the lumbar supports at any time
• Includeds a second hose clamp as a secondary locking feature to insure air doesn't leak

Bartact Heavy-Duty Ratchet Tie Downs

From $149.99

• Polyester webbing, strongest in the industy
• The longest standards in the industy
• Heavy-duty abrasion sleeve between axle strap hardware and hook
• Heavy-duty twist snap hooks at both ends
• Proudly made in the U.S.A

Bartact Embroidered Patches

From $4.99

• 2" X 3" embroidered patch
• Velco/Hook backing

Bartact Cotton Face Masks

From $16.25

• 2-ply cotton
• Includes a filter pocket
• Washable and re-useable