Bd Diesel Xtruded Trans Oil Cooler

From $653.55

• Xtruded Trans Oil Cooler
• California Residents: WARNING

BD Diesel Original BD Exhaust Brakes

From $1,513.30

• Butterfly Diameter: 4in.
• Operation Style: Air
• Pump: Included
• Controller: Manual
• California Residents: WARNING

Synergy Manufacturing Front Upper Control Arms

From $320.00

Synergy Manufacturing Adjustable Steering Column

From $15.00

• Allows for easy adjustment of steering column
• Laser cut from 3/16 inch steel
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End

From $60.00

• Fully greasable sintered metal on metal bushing design
• Tie Rod end boot is made from silicone and polyurethane
• 7/8-18 UNF LH Thread
• Spring loaded bearing design keeps pressure on bearings
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Limit Straps

From $25.00

• Limit Straps
• 8" up to 20" inch Lengths Hole to Hole
• Plated end fittings are made from tough 4130 steel and have 1/2" hole
• U.S. made 1.75" nylon webbing with a 7000 lb. rating and superior flexibility
• Quad wrap (ultra strength)
• Eyelets have an integrated deflector clip to minimize abrasion
• Sold individually
• Made in the USA
• California Residents: WARNING

BD Diesel FleX-Plates

From $422.70

• Forged Billet
• Black oxide Flex-Plate
• SFI 29.3 rated
• Rated for 1500 Flbs of torque
• Bolt in replacement for OEM
• California Residents: WARNING

Synergy Manufacturing Radius Axle Link Brackets

From $1,000.00

• Synergy Manufacturing Radius Axle Link Brackets are designed to be used on an axle housing with a 3" diameter
• The link brackets are laser cut and CNC bent from 1/4" carbon steel
• The heavy duty 3 sided construction provides for a VERY rigid bracket and is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildable spherical bearing assemblies
• California Residents: WARNING

BD Diesel Fuel Injector Kits

From $243.95

• Injector Type: Complete Injector
• BD Diesel Xchange Required: Yes
• Gaskets Included: Yes
• California Residents: WARNING

Synergy Manufacturing Rear Stretch Bracket Kit

From $500.00

• Synergy Manufacturing Rear Stretch Bracket Kit allows 2 Door JK's to be stretched with the Synergy 8 inch stretch kit while retaining the factory style coil spring and shock setup
• The Rear Stretch Bracket Kit Relocates upper coil spring mounts and upper shock mounts back 8 inches
• The Synergy Manufacturing Rear Stretch Bracket Kit is designed to be used in conjunction with Synergy 8032 rear 8 inch stretch brackets and long arms
• California Residents: WARNING

Synergy Manufacturing Front Sway Bar Links

From $115.00

• Sway Bar Links
• Front
• 100% bolt on components
• Made from 11/16" solid 1018 steel and are clear zinc plated for maximum corrosion resistance
• Will Sold as a pair
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Weld-On Rear Track Bar Brackets

From $100.00

• Weld-On rear track-bar bracket designed to replace the weak factory track bar bracket
• Replace the thin factory brackets on a stock axle or use for swapping any axle
• Multiple Track-bar holes for suspension adjustments
• This bracket requires the use of a minimum 3" rear bump stop spacer for clearance with the exhaust
• California Residents: WARNING

Synergy Lift Coil Springs

From $1,480.00

• Lift coil springs
• Synergy coils offer excellent off road performance while preserving ride quality
• Progressively wound
• keeps spring from coming unbound at suspension droop
• Progressively wound spring eliminates annoying spring clanking found on most suspension kits
• Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
• Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
• Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
• Sold in a pair
• California Residents: WARNING

Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING

Synergy Manufacturing Control Arm Cam Bolt Kit

From $45.00

• Synergy 9/16" Control Arm Cam Bolt Kit
• Cam bolts are manufactured from high carbon heat treated steel
• All included components are zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Cam bolt offers 1/2" adjustment in either direction
• The bolt will work on a mounting width of 2.25 - 3"
• California Residents: WARNING

Synergy Manufacturing Side Plate Mounting Kit (Arms Only)

From $75.00

• (2) Side Plate Mounting Arms only
• Jeep JK, 4 Door
• Made in the USA
• California Residents: WARNING

Synergy Tie Rod Ends

From $60.00

• Outperforms the factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesnt neck down at base) and elimination of the nylon ball race.
• California Residents: WARNING

Synergy Manufacturing Rear Track Bar Brackets

From $100.00

• Bracket raises the vehicle's axle side track bar mount
• The vehicle's rollcenter is raised, reducing body roll and dramatically improving overall handling
• Special bolt on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing 2 - 3 Inch Bolt-on Rear Track Bar Brackets

From $250.00

• Synergy Manufacturing 2 - 3 Inch Bolt-on Rear Track Bar Brackets are heavy duty rear track bar brackets for the Jeep JK
• The bracket raises the vehicle's axle side track bar mount by 3.0 inches
• The Synergy Manufacturing 2 - 3 Inch Bolt-on Rear Track Bar Brackets is laser cut from 3/16" steel with a 2 stage powdercoat finish for maximum strength and durability
• California Residents: WARNING

Synergy Manufacturing Axle Bracket Kit

From $175.00

• Front and Rear applications
• Various mounts included
• Made in the USA
• California Residents: WARNING

Bd Diesel Crank Case Vent Filter Kit

From $459.75

• Reduces crankcase oil vapor intake
• Includes everything you need for a professional installation
• California Residents: WARNING

Synergy Manufacturing Double Adjuster Tube Adapter

From $55.00

• Made from solid stock 1018 Steel
• Adapters Include: (1) Weld on Tube Adapter with Pinch Bolt Slit and Tubes, (1) Zinc Plated Double Adjuster Sleeve to be used with a Thread Shank Rod End, and (1) Pinch Bolt Hardware
• Welding required
• Made in the U.S.A
• California Residents: WARNING

Bd Diesel Positive Air Shutdown

From $653.55

• Valve Construction:Cast Aluminum
• Activation:Electrical
• Overspeed Protection:Yes
• California Residents: WARNING

Bd Diesel Performance Converter

From $1,170.35

• Performance Torque Converter
• Applies Torque At Lower RPM
• 450+ RWHP
• California Residents: WARNING