Bilstein 9100 Series Shocks

From $1,030.99

• For Smooth Body
• Monotube gas pressure construction
• 2.0" or 2.65"(OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable For Coilover:
• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0" or 2.65 (OD) Body
• Coil Spring Hardware: 3" or 3-5/8" (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• Special Notes:BILSTEIN does not manufacture or sell coil springs for off-road use. However, most BILSTEIN off-road retailers sell springs. They can also offer advice on spring rates
• It is not recommended to use a coilover in conjunction with an auxiliary spring source, such as Leaf Springs or Torsion Bars. For Bypass:
• Widest range of tuning combinations within the industry
• Available in 2.0” or 2.65” body
• Completely owner tunable and rebuildable
• Available in piggyback and various hose lengths
• Bypass tubes allow for position sensitive damping adjustability - custom bypass layouts available
• Special Notes:External Bypass dampers require an external spring source such as a coilover, leaf spring, torsion bar, or auxiliary coil. These dampers will not support a vehicle. For Rock Crawler:
• Monotube gas pressure construction
• Nickel plated 2" diameter threaded body
• 2.5" x 12" reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12", 14" and 17" travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Rock Crawler Series

From $399.99

• Monotube gas pressure construction
• Nickel plated 2 inch diameter threaded body
• 2.5 inch x 12 inch reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12 inch, 14 inch and 17 inch travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein B4 OE Replacement Air Springs

From $1,078.00

• Air Spring with Monotube Shock Absorber
• California Residents: WARNING

Bilstein OE Replacement DampTronic Series Shock Absorber

From $220.00

• Electronic adjustment system developed specifically for each application
• Adjustable setting levels for the most dynamic driving experience
• Ability to switch instantly between settings to suit driving conditions
• Threaded body adjustable range of 20mm at both axles, while installed
• Lowering of approx. 30-50 mm at front and rear
• Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
• Spring plates and lock nuts made from a special aluminium alloy
• Surface coating using Triple-C-Technology® for long-lasting corrosion resistance
• Round threads for easy adjustment
• Quality sport springs made from highly durable material
• Gas pressure technology
• BILSTEIN monotube technology, made in Germany
• California Residents: WARNING

Bilstein PSS Suspension Kit

From $1,070.00

• The Bilstein B14 PSS kit features both coilover and standard monotube gas shocks with performance-level valving, with application specific, progressive rate coil springs
• The solid aluminum spring seat and lock nut allows for precise adjustment of the vehicle's lowered ride height from 30mm to 50mm
• Bilstein's patented Triple-C-Technology coating ensures long-lasting resistance to corrosion
• This kit is ideal for the driver looking to set a car's ride height for both looks and improved handling
• California Residents: WARNING

Bilstein B4 OE Replacement Strut Assembly

From $101.00

Bilstein Monotube Strut Inserts

From $70.00

• Heavy Duty Strut Cartridge
• Bilstein 4600 series
• Body Diameter:2 in
• Type:strut cartridge
• Finish:white
• Reservoir:no
• Boots included: no
• California Residents: WARNING

Bilstein 9300 Series Shocks

From $882.99

• For coilover:
• Comes with ¾” teflon uniball with machined aluminum eye ring
• Hose length and fittings options: straight, 90 degree, 45 degree
• Completely owner tunable and rebuildable
• Widest range of tuning combinations within the industry
• Included spring hardware for dual-rate 3” ID springs
• Hi-flow independent rebound and compression bypass adjusters For Black Hawk
• One piece 6061 extruded aluminum body with hard anodized finish
• 30% faster heat dissipation
• 10% - 25% lighter than similar welded bypass steel shocks
• Up to 100 degrees cooler peak operating temperature
• 4 ½ inch diameter aluminum reservoir with anti-cavitation valve (ACV)
• Bypass tubes allow for position sensitive damping adjustability
• Completely owner tunable and rebuildable
• California Residents: WARNING

Bilstein 8125 Series Coilover with Reservoir

From $502.00

• Available in 60mm and 46mm monotubes
• Available from 5” to 16” of travel
• Threaded body with dual rate coilover hardware
• Monotube design for fade-free performance
• Remote reservoir for improved heat dissipation
• High temperature seal extends life of shock
• 22mm case hardened piston rod provides brute tensile strength while resisting sand blasting and rock chipping
• Zinc plated to withstand harsh off-road elements
• High temperature, size -8 hose
• Owner rebuildable
• Industry standard 5/8” bearing
• All components are billet machined
• Made in the USA
• California Residents: WARNING

Bilstein 9200 Series Bypass Shock Absorbers

From $1,037.00

DV8 Offroad Hard Tops

From $2,799.99

• Made with high quality seals, fiberglass, and advanced aerodynamics
• 1 and 2 piece design
• Carpeted interior and tinted windows
• Uses OEM mounting system (no modifications)
• OEM seal placement
• Made in the USA

Bilstein B8 6112 Suspension Leveling Kits

From $495.00

Bilstein B8 5112 Suspension Leveling Kits

From $456.00

• Provides 2"-2.75" of lift depending on application
• Kit includes (2) front B8 5100 shocks and (2) custom tuned springs
• 46mm monotube shock design for consistent fade-free performance
• Patented digressive shock valving instantly reacts to changing surface conditions for maximum comfort, and control on and off-road
• Vehicle specific tuning optimizes performance for ride and handling
• OEM certified shock mounting hardware allows for easy installation
• Zinc plated shocks for resistance to harsh elements
• Made in the USA
• Limited Lifetime Warranty
• California Residents: WARNING

DV8 Offroad Front Bumpers

From $1,049.99

• 2 stage powder coat finish
• Modular 2 & 3 piece design
• Steel construction
• Accomodates up to a 12,500 lbs Winch
• Cut out holes for lights
• D-ring shackle mounts
• DV8 no hassle warranty

DV8 Offroad Rear Bumpers

From $1,099.99

• 3/16 cold rolled steel with 1/4 inch plus gusseting
• 2 step powder coat finsh
• UV resistant
• Extremely durable

Bilstein B8 5162 Suspension Leveling Kits

From $688.00

• Bilsteins 46mm monotube design ensures consistent, fade-free performance in all conditions
• Kit includes (2) B8 5160 shocks and (2) matched springs
• Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
• OEM certified mounting hardware allows for easy installation
• Zinc plated for resistance against harsh elements
• Made in the USA
• Limited lifetime warranty
• California Residents: WARNING

Bilstein B6 Series HD Suspension Strut Assembly

From $108.00

• Monotube gas pressure construction
• Improved safety and sportiness
• Added traction and enhanced stability
• Increased durability and performance while maintaining ride comfort
• Road-tested and fine-tuned by BILSTEIN for each vehicle specific application
• California Residents: WARNING

DV8 Offroad Traction Boards

From $139.99

• Multiple color options
• Tested to withstand 10 tons of compression
• Stackable to save space on the trail
• Ergonomic handles are intuitive and easy to use
• Base specifically made for a Hi-lift style jack
• Additional functionality as a shovel
• Various holes throughout the boards allow multiple mounting options
• Sold as a pair

Bilstein B12 Series Special Suspension Kits

From $1,019.00

• Bilstein dampers and eibach lowering springs
• Professional cornering system lowering up to 40mm
• Precise response, excellent performance and predictable control
• If you're looking for the perfect combination of sporty dynamics, superior appearance, and high performance for your car, you're on the right track with the BILSTEIN B12
• California Residents: WARNING

DV8 Offroad A-Pillar Light Mounting Brackets

From $99.99

• Nade of steel
• Hood and windshield mounts
• Work with other light brands
• Different size configurations

DV8 Offroad Elite Series LED Light Pods

From $59.99

• Shatterproof UV resistant lens
• OSRAM LEDs rated at 50,000 hours of use
• Bezel-less housing with heat fins
• IP68 Rated - resistant to water and dust
• 3 year warranty

DV8 Offroad Chrome Series Offroad Light Bars

From $179.99

• Single/dual row light bar
• Lights come with a poly carbonate lens
• IP68 rated
• 3W Cree LED's
• Come with side and/or bottom mounts
• Limited warranty

DV8 Offroad Sensor Bezel

From $19.99

• Black finish
• Textured design
• UV resistant ABS plastic
• Allows for an easy transfer of the sensor brackets
• Limited warranty

Bilstein 7100 Classic Coilover Series Shock Absorber

From $134.00

• Monotube gas pressure construction
• Threaded body lengths to 10 inchs of travel
• Self-adjusting deflecting disc valving
• 2 inch diameter shock body
• High-flow piston reduces harshness
• Factory rebuildable
• Spherical bearing end loops, which accept 1/2 inch and 12mm mounting bolts
• Available for standard and coilover applications, this series is primarily designed for vehicles with modified shock mounts and Type I VW suspension
• California Residents: WARNING