Power Stop Autospecialty Parking Brake Shoe

From $21.99

• Autospecialty Parking Brake Shoe
• Rear
• California Residents: WARNING

Bilstein 9100 Series Coilover Shock Absorber

From $567.99

• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0 inch or 2.65 inch (OD) Body
• Coil Spring Hardware: 3 inch or 3-5/8 inch (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Smooth Body Series Shock Absorber

From $407.99

• Monotube gas pressure construction
• 2.0 inch or 2.65 inch (OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Series Shocks

From $1,030.99

• For Smooth Body
• Monotube gas pressure construction
• 2.0" or 2.65"(OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable For Coilover:
• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0" or 2.65 (OD) Body
• Coil Spring Hardware: 3" or 3-5/8" (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• Special Notes:BILSTEIN does not manufacture or sell coil springs for off-road use. However, most BILSTEIN off-road retailers sell springs. They can also offer advice on spring rates
• It is not recommended to use a coilover in conjunction with an auxiliary spring source, such as Leaf Springs or Torsion Bars. For Bypass:
• Widest range of tuning combinations within the industry
• Available in 2.0” or 2.65” body
• Completely owner tunable and rebuildable
• Available in piggyback and various hose lengths
• Bypass tubes allow for position sensitive damping adjustability - custom bypass layouts available
• Special Notes:External Bypass dampers require an external spring source such as a coilover, leaf spring, torsion bar, or auxiliary coil. These dampers will not support a vehicle. For Rock Crawler:
• Monotube gas pressure construction
• Nickel plated 2" diameter threaded body
• 2.5" x 12" reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12", 14" and 17" travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Rock Crawler Series

From $399.99

• Monotube gas pressure construction
• Nickel plated 2 inch diameter threaded body
• 2.5 inch x 12 inch reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12 inch, 14 inch and 17 inch travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein B4 OE Replacement Air Springs

From $489.99

• Air Spring with Monotube Shock Absorber
• California Residents: WARNING

Power Stop Z26 Street Warrior Brake Kits

From $1,026.99

• Z26 carbon-fiber ceramic brake pads
• Designed for muscle cars and high performance vehicles
• Premium stainless steel shims
• Better heat dissipation and virtually noise-free braking
• Drilled, slotted and zinc plated rotors
• Provide maximum cooling and helps protect against rust and corrosion
• Premium stainless steel hardware
• Hi-tempbrake lubricant
• California Residents: WARNING

Power Stop Brake Pad Wear Sensors

From $10.99

• Brake Pad Wear Sensor
• California Residents: WARNING

Bilstein 9300 Series Shocks

From $882.99

• For coilover:
• Comes with ¾” teflon uniball with machined aluminum eye ring
• Hose length and fittings options: straight, 90 degree, 45 degree
• Completely owner tunable and rebuildable
• Widest range of tuning combinations within the industry
• Included spring hardware for dual-rate 3” ID springs
• Hi-flow independent rebound and compression bypass adjusters For Black Hawk
• One piece 6061 extruded aluminum body with hard anodized finish
• 30% faster heat dissipation
• 10% - 25% lighter than similar welded bypass steel shocks
• Up to 100 degrees cooler peak operating temperature
• 4 ½ inch diameter aluminum reservoir with anti-cavitation valve (ACV)
• Bypass tubes allow for position sensitive damping adjustability
• Completely owner tunable and rebuildable
• California Residents: WARNING

Bilstein 9200 Series Bypass Shock Absorbers

From $1,454.99

Bilstein M Series Shock Absorbers

From $99.99

• Sealed Unit Consistent Fade-Free Performance
• California Residents: WARNING

Bilstein G Series Shock Absorbers

From $89.99

• Sealed Unit Consistent Fade-Free Performance
• California Residents: WARNING

Bilstein B8 6112 Suspension Leveling Kits

From $770.00

Bilstein B8 8100 Series Shock Absorbers

From $1,299.99

Bilstein 4600 Series Steering Dampers

From $128.99

Power Stop Autospecialty Remanufactured Brake Calipers

From $100.99

Power Stop Evolution Genuine Geomet Coated Brake Rotors

From $105.99

• Evolution coated rotors
• Geniune Geomet coating for maximum protection against rust & corrosion
• 100% mill balanced
• Each Evolution coated rotor is checked and balanced for safe, smooth braking performance.