Bilstein 9100 Series Shocks

From $1,030.99

• For Smooth Body
• Monotube gas pressure construction
• 2.0" or 2.65"(OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable For Coilover:
• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0" or 2.65 (OD) Body
• Coil Spring Hardware: 3" or 3-5/8" (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• Special Notes:BILSTEIN does not manufacture or sell coil springs for off-road use. However, most BILSTEIN off-road retailers sell springs. They can also offer advice on spring rates
• It is not recommended to use a coilover in conjunction with an auxiliary spring source, such as Leaf Springs or Torsion Bars. For Bypass:
• Widest range of tuning combinations within the industry
• Available in 2.0” or 2.65” body
• Completely owner tunable and rebuildable
• Available in piggyback and various hose lengths
• Bypass tubes allow for position sensitive damping adjustability - custom bypass layouts available
• Special Notes:External Bypass dampers require an external spring source such as a coilover, leaf spring, torsion bar, or auxiliary coil. These dampers will not support a vehicle. For Rock Crawler:
• Monotube gas pressure construction
• Nickel plated 2" diameter threaded body
• 2.5" x 12" reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12", 14" and 17" travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Rock Crawler Series

From $399.99

• Monotube gas pressure construction
• Nickel plated 2 inch diameter threaded body
• 2.5 inch x 12 inch reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12 inch, 14 inch and 17 inch travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein B4 OE Replacement Air Springs

From $1,078.00

• Air Spring with Monotube Shock Absorber
• California Residents: WARNING

Bilstein OE Replacement DampTronic Series Shock Absorber

From $220.00

• Electronic adjustment system developed specifically for each application
• Adjustable setting levels for the most dynamic driving experience
• Ability to switch instantly between settings to suit driving conditions
• Threaded body adjustable range of 20mm at both axles, while installed
• Lowering of approx. 30-50 mm at front and rear
• Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
• Spring plates and lock nuts made from a special aluminium alloy
• Surface coating using Triple-C-Technology® for long-lasting corrosion resistance
• Round threads for easy adjustment
• Quality sport springs made from highly durable material
• Gas pressure technology
• BILSTEIN monotube technology, made in Germany
• California Residents: WARNING

Bilstein PSS Suspension Kit

From $1,070.00

• The Bilstein B14 PSS kit features both coilover and standard monotube gas shocks with performance-level valving, with application specific, progressive rate coil springs
• The solid aluminum spring seat and lock nut allows for precise adjustment of the vehicle's lowered ride height from 30mm to 50mm
• Bilstein's patented Triple-C-Technology coating ensures long-lasting resistance to corrosion
• This kit is ideal for the driver looking to set a car's ride height for both looks and improved handling
• California Residents: WARNING

Bilstein B4 OE Replacement Strut Assembly

From $101.00

Bilstein Monotube Strut Inserts

From $70.00

• Heavy Duty Strut Cartridge
• Bilstein 4600 series
• Body Diameter:2 in
• Type:strut cartridge
• Finish:white
• Reservoir:no
• Boots included: no
• California Residents: WARNING

Bilstein 9300 Series Shocks

From $882.99

• For coilover:
• Comes with ¾” teflon uniball with machined aluminum eye ring
• Hose length and fittings options: straight, 90 degree, 45 degree
• Completely owner tunable and rebuildable
• Widest range of tuning combinations within the industry
• Included spring hardware for dual-rate 3” ID springs
• Hi-flow independent rebound and compression bypass adjusters For Black Hawk
• One piece 6061 extruded aluminum body with hard anodized finish
• 30% faster heat dissipation
• 10% - 25% lighter than similar welded bypass steel shocks
• Up to 100 degrees cooler peak operating temperature
• 4 ½ inch diameter aluminum reservoir with anti-cavitation valve (ACV)
• Bypass tubes allow for position sensitive damping adjustability
• Completely owner tunable and rebuildable
• California Residents: WARNING

Bilstein 8125 Series Coilover with Reservoir

From $502.00

• Available in 60mm and 46mm monotubes
• Available from 5” to 16” of travel
• Threaded body with dual rate coilover hardware
• Monotube design for fade-free performance
• Remote reservoir for improved heat dissipation
• High temperature seal extends life of shock
• 22mm case hardened piston rod provides brute tensile strength while resisting sand blasting and rock chipping
• Zinc plated to withstand harsh off-road elements
• High temperature, size -8 hose
• Owner rebuildable
• Industry standard 5/8” bearing
• All components are billet machined
• Made in the USA
• California Residents: WARNING

Bilstein 9200 Series Bypass Shock Absorbers

From $1,037.00

ReadyLift Suspension Lift Kits

From $1,099.95

• Easy, bolt-on installation - no permanent modifications
• Delivers increased ground clearance
• Factory ride and handling
• An improved ‘leveled’ stance
• Kits available with or without shocks

ReadyLift Leveling Kits

From $1,099.95

Bilstein B8 6112 Suspension Leveling Kits

From $495.00

ReadyLift Radius Arm Brackets

From $299.95

Bilstein B8 5112 Suspension Leveling Kits

From $456.00

• Provides 2"-2.75" of lift depending on application
• Kit includes (2) front B8 5100 shocks and (2) custom tuned springs
• 46mm monotube shock design for consistent fade-free performance
• Patented digressive shock valving instantly reacts to changing surface conditions for maximum comfort, and control on and off-road
• Vehicle specific tuning optimizes performance for ride and handling
• OEM certified shock mounting hardware allows for easy installation
• Zinc plated shocks for resistance to harsh elements
• Made in the USA
• Limited Lifetime Warranty
• California Residents: WARNING

ReadyLift Control Arms

From $1,199.95

ReadyLift Ball Joints

From $49.95

• Replacement ball joint
• For use with upper control arms in ReadyLift 4 inch SST lift kit
• Sold individually

ReadyLift Steering Stabilizer Kits

From $301.99

• Reduces vibrations from larger wheels and tires
• Improves steering responsiveness and feel
• Includes two Bilstein 5100 series steering stabilizers
• Works on stock, leveled or lifted Super Duty and Ram HD trucks
• Requires minimum of 5.75" backspace wheels for proper clearance - not compatible with factory wheels
• Easy to install - no permanent modifications
• California Residents: WARNING

Bilstein B8 5162 Suspension Leveling Kits

From $688.00

• Bilsteins 46mm monotube design ensures consistent, fade-free performance in all conditions
• Kit includes (2) B8 5160 shocks and (2) matched springs
• Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
• OEM certified mounting hardware allows for easy installation
• Zinc plated for resistance against harsh elements
• Made in the USA
• Limited lifetime warranty
• California Residents: WARNING

ReadyLift Track Bars

From $199.95

ReadyLift High Clearance Anti-Intrusion Beams

From $159.95

• Easy installation with minor disassembly and trimming
• Retain the safety and security benefits of occupant protection
• Replaces the factory anti-intrusion beams
• Notched design increases tire turning clearance
• Allows for up to a 285/70-17 tire (33") on ReadyLIFT 3" lift kit equipped vehicles
• Does require some minor disassembly and plastic trimming

ReadyLift Auto-Leveling Headlight Brackets

From $49.95

ReadyLift Rear Block Kits

From $149.95

Bilstein B6 Series HD Suspension Strut Assembly

From $108.00

• Monotube gas pressure construction
• Improved safety and sportiness
• Added traction and enhanced stability
• Increased durability and performance while maintaining ride comfort
• Road-tested and fine-tuned by BILSTEIN for each vehicle specific application
• California Residents: WARNING