Bilstein 9100 Smooth Body Series Shock Absorber

From $407.99

• Monotube gas pressure construction
• 2.0 inch or 2.65 inch (OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Series Shocks

From $1,030.99

• For Smooth Body
• Monotube gas pressure construction
• 2.0" or 2.65"(OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable For Coilover:
• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0" or 2.65 (OD) Body
• Coil Spring Hardware: 3" or 3-5/8" (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• Special Notes:BILSTEIN does not manufacture or sell coil springs for off-road use. However, most BILSTEIN off-road retailers sell springs. They can also offer advice on spring rates
• It is not recommended to use a coilover in conjunction with an auxiliary spring source, such as Leaf Springs or Torsion Bars. For Bypass:
• Widest range of tuning combinations within the industry
• Available in 2.0” or 2.65” body
• Completely owner tunable and rebuildable
• Available in piggyback and various hose lengths
• Bypass tubes allow for position sensitive damping adjustability - custom bypass layouts available
• Special Notes:External Bypass dampers require an external spring source such as a coilover, leaf spring, torsion bar, or auxiliary coil. These dampers will not support a vehicle. For Rock Crawler:
• Monotube gas pressure construction
• Nickel plated 2" diameter threaded body
• 2.5" x 12" reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12", 14" and 17" travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Rock Crawler Series

From $399.99

• Monotube gas pressure construction
• Nickel plated 2 inch diameter threaded body
• 2.5 inch x 12 inch reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12 inch, 14 inch and 17 inch travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein B4 OE Replacement Air Springs

From $489.99

• Air Spring with Monotube Shock Absorber
• California Residents: WARNING

Rigid Industries Wire Harnesses

From $109.99

• 3-Wire Light Wire Harness
• Single Light
• High Power
• This 13' wiring harness is designed to connect a single 20"-50" E Series Amber/White LED light bar to your 12V electrical system
• It incorporates an inline fuse holder, a 14V relay, and a waterproof switch
• California Residents: WARNING

Rigid Industries RAM Suction Arm Plate

From $53.99

• To accommodate Rigid Industries' SR-M Series, SR-Q Series and D-Series LED Lights, Rigid Offers 17 different custom RAM mounting systems. You may choose from three different surface attachment methods: Suction Cup, Flat Surface Bolt-Down or a Pole Clamp. You can choose from three different arm lengths: short, medium, or long. You can also choose a single light attachment point or a plate for mounting multiple lights. RAM Mount's ball and joint design allows for a full 360? rotation. RAM Mounts are extremely durable (supports up to 5 lbs in a rugged environment), all stainless steel hardware, provide maximum adjustability and are backed by RAM Mounts' lifetime warranty.
• California Residents: WARNING

Bilstein 9300 Series Shocks

From $882.99

• For coilover:
• Comes with ¾” teflon uniball with machined aluminum eye ring
• Hose length and fittings options: straight, 90 degree, 45 degree
• Completely owner tunable and rebuildable
• Widest range of tuning combinations within the industry
• Included spring hardware for dual-rate 3” ID springs
• Hi-flow independent rebound and compression bypass adjusters For Black Hawk
• One piece 6061 extruded aluminum body with hard anodized finish
• 30% faster heat dissipation
• 10% - 25% lighter than similar welded bypass steel shocks
• Up to 100 degrees cooler peak operating temperature
• 4 ½ inch diameter aluminum reservoir with anti-cavitation valve (ACV)
• Bypass tubes allow for position sensitive damping adjustability
• Completely owner tunable and rebuildable
• California Residents: WARNING

Bilstein 9200 Series Bypass Shock Absorbers

From $1,454.99

Rigid Industries Adapt XE LED Lights

From $20.99

• Rigid Adapt XE Extreme Enduro Ready To Ride Moto Kit
• LED light with 3 lighting zones
• GPS module
• Amber light cover
• White number plate
• Wire harness
• 3 position kill switch
• Mounting kit

Rigid Industries 360-Series Light Covers

From $46.99

• Easy to snap on and off
• Polycarbonate plastic
• Extra layer of protection
• Kit contains 2 covers

Rigid Industries 360-Series SAE Fog Light Kits

From $122.99

• Injection molded polycarbonate
• Black finish
• Includes all necessary hardware
• Fully adjustable
• Uses OEM mounting hardware
• Seamless OEM fitment
• SAE J583 compliant
• 50,000 Hr+ LED lifespan
• Patented optics
• Pressure equalizing vent
• IP68 rated for dust/water ingress

Bilstein M Series Shock Absorbers

From $99.99

• Sealed Unit Consistent Fade-Free Performance
• California Residents: WARNING

Bilstein G Series Shock Absorbers

From $89.99

• Sealed Unit Consistent Fade-Free Performance
• California Residents: WARNING

Bilstein B8 6112 Suspension Leveling Kits

From $770.00

Bilstein B8 8100 Series Shock Absorbers

From $1,299.99

Bilstein 4600 Series Steering Dampers

From $128.99