Bilstein 7100 Series Shocks

From $106.00

• Monotube gas pressure construction
• Self-adjusting deflecting disc valving
• 2" diameter shock body
• High-flow piston reduces harshness
• Choice of valvings
• Schrader valve shocks with dividing piston
• 8", 10", 12", & 14" travel
• California Residents: WARNING

Bilstein 9300 Black Hawk Series Shock Absorber

From $1,699.59

• One piece 6061 extruded aluminum body with hard anodized finish
• 30% faster heat dissipation
• 10% - 25% lighter than similar welded bypass steel shocks
• Up to 100 degrees cooler peak operating temperature
• 4 1/2 inch diameter aluminum reservoir with anti-cavitation valve (ACV)
• Bypass tubes allow for position sensitive damping adjustability
• Completely owner tunable and rebuildable
• California Residents: WARNING

Bilstein B8 Series SP Shock Absorber

From $123.00

• Monotube gas pressure construction
• Improved safety and sportiness
• Added traction and enhanced stability
• Increased durability and performance while maintaining ride comfort
• Road-tested and fine-tuned by BILSTEIN for each vehicle specific application
• California Residents: WARNING

Rubicon Express Gen II Sway Bar Links

From $20.99

• Keep your Jeeps Sway bar in its proper location after installing a suspension lift and ensure your Jeep handles safely with these sway bar links from Rubicon Express.
• California Residents: WARNING

Rubicon Express Coil Spring Mount

From $63.50

• Correct rear coil spring and track bar location woes after lifting your Jeep with a set of coil spring relocators from Rubicon Express.
• California Residents: WARNING

Rubicon Express Sway Bar Disconnect Center Tubes

From $25.99

• Rubicon Express Sway Bar Disconnect Center Tube
• California Residents: WARNING

Bilstein Performance Plus Series Shock Absorber

From $125.00

• 36mm, 46mm, monotube and twin tube available options
• BILSTEIN?s mono-tube technology is the number-one choice in motorsports and series-production sports cars: no other type gives engineers the same freedom to choose the perfect installation location or position
• BILSTEIN?s twin-tube absorbers, featuring OEM quality that has undergone rigorous testing, offer a marked improvement in driving characteristics with universal spare parts replaced in a timely and efficient manner
• California Residents: WARNING

Bilstein B4 OE Replacement Shock Absorbers

From $101.00

• Constant damping characteristics under any load
• Consistent performance and handling give the vehicle a "new car feel" every time
• Proven BILSTEIN gas pressure technology
• High OEM quality standards
• California Residents: WARNING

Bilstein B3 OE Replacement Air Bags

From $240.00

• Air Bag
• Finish: Black
• California Residents: WARNING

Bilstein OE Replacement Air Series Shock Absorber

From $1,019.00

• High OEM quality standards
• Proven BILSTEIN gas pressure technology
• Responds to street and vehicle conditions in milliseconds for instant adaptivity
• Provides excellent comfort and perfect driving characteristics
• Manufactured with 100% new parts for maximum reliability and safety
• California Residents: WARNING

Bilstein 9100 Series Bump Stop

From $267.00

• Thick-walled Monotube design
• Seamless steel & electroless nickel finished body
• Universal frame bracket fitment (2 inch O.D.)
• 1-1/4 inch hardended chrome steel shaft
• Nitrogen adjustable spring rate capability
• California Residents: WARNING

Rubicon Express Super-Flex Joints

From $56.99

• Rebuild your Rubicon Express Super-Flex Joints with these replacement races and keep the rod end operating and articulating smoothly and quietly.
• California Residents: WARNING

Bilstein AK Series Shocks

From $105.80

• AK Series shock absorbers
• Designed for motorsports applications that require the use of the OE mounting components
• Monotube design with steel spring valve discs for consistent, fade free performance and superior durability
• AK Series shock absorbers are ideal for racers who demand reliable performance that also meets their sanctioning body's mounting requirements
• California Residents: WARNING

Bilstein 9100 Series Coilover Shock Absorber

From $567.99

• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0 inch or 2.65 inch (OD) Body
• Coil Spring Hardware: 3 inch or 3-5/8 inch (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Smooth Body Series Shock Absorber

From $407.99

• Monotube gas pressure construction
• 2.0 inch or 2.65 inch (OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Series Shocks

From $1,030.99

• For Smooth Body
• Monotube gas pressure construction
• 2.0" or 2.65"(OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable For Coilover:
• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0" or 2.65 (OD) Body
• Coil Spring Hardware: 3" or 3-5/8" (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• Special Notes:BILSTEIN does not manufacture or sell coil springs for off-road use. However, most BILSTEIN off-road retailers sell springs. They can also offer advice on spring rates
• It is not recommended to use a coilover in conjunction with an auxiliary spring source, such as Leaf Springs or Torsion Bars. For Bypass:
• Widest range of tuning combinations within the industry
• Available in 2.0” or 2.65” body
• Completely owner tunable and rebuildable
• Available in piggyback and various hose lengths
• Bypass tubes allow for position sensitive damping adjustability - custom bypass layouts available
• Special Notes:External Bypass dampers require an external spring source such as a coilover, leaf spring, torsion bar, or auxiliary coil. These dampers will not support a vehicle. For Rock Crawler:
• Monotube gas pressure construction
• Nickel plated 2" diameter threaded body
• 2.5" x 12" reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12", 14" and 17" travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Rock Crawler Series

From $399.99

• Monotube gas pressure construction
• Nickel plated 2 inch diameter threaded body
• 2.5 inch x 12 inch reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12 inch, 14 inch and 17 inch travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein B4 OE Replacement Air Springs

From $1,078.00

• Air Spring with Monotube Shock Absorber
• California Residents: WARNING

Bilstein OE Replacement DampTronic Series Shock Absorber

From $220.00

• Electronic adjustment system developed specifically for each application
• Adjustable setting levels for the most dynamic driving experience
• Ability to switch instantly between settings to suit driving conditions
• Threaded body adjustable range of 20mm at both axles, while installed
• Lowering of approx. 30-50 mm at front and rear
• Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
• Spring plates and lock nuts made from a special aluminium alloy
• Surface coating using Triple-C-Technology® for long-lasting corrosion resistance
• Round threads for easy adjustment
• Quality sport springs made from highly durable material
• Gas pressure technology
• BILSTEIN monotube technology, made in Germany
• California Residents: WARNING

Bilstein PSS Suspension Kit

From $1,070.00

• The Bilstein B14 PSS kit features both coilover and standard monotube gas shocks with performance-level valving, with application specific, progressive rate coil springs
• The solid aluminum spring seat and lock nut allows for precise adjustment of the vehicle's lowered ride height from 30mm to 50mm
• Bilstein's patented Triple-C-Technology coating ensures long-lasting resistance to corrosion
• This kit is ideal for the driver looking to set a car's ride height for both looks and improved handling
• California Residents: WARNING

Rubicon Express Transmission Mount Bracket

From $26.34

• Transmission Mount Bracket
• Installation Hardware
• California Residents: WARNING

Bilstein B4 OE Replacement Strut Assembly

From $101.00

Bilstein Monotube Strut Inserts

From $70.00

• Heavy Duty Strut Cartridge
• Bilstein 4600 series
• Body Diameter:2 in
• Type:strut cartridge
• Finish:white
• Reservoir:no
• Boots included: no
• California Residents: WARNING

Rubicon Express Gas Tank Skid Plates

From $109.99

• Rubicon Express has everything you need to protect the vulnerable undercarriage of your Jeep Wrangler from front to back, with skid plates for your engine oil pan, transfer case, and fuel tank. All of the skidplates are CNC laser cut from 3/16-inch steel to withstand even the worst abuse, and are designed to mount up tight to the drivetrain to maximize ground clearance. The modular protection system allows you to add skidplates as your needs and budget allow without any concerns about compatibility.
• California Residents: WARNING