Rolling into Wheel & Tire Month! Shop Now

Black Bumpers, Tire Carriers & Winch Mounts

REFINE BY:

BRAND

Product Category

Fitment

Direct Fit (264)
Universal Fit (1)

Finish

Bare (412)
Black Powder Coat (20)
Black/Milled Spokes (3)
Chrome (23)
Crimson Candy Red (1)
Gloss Black (5)
Matte Black (34)
Painted (1)
Plastic (7)
Polished (44)
View More
Powder Coat (1313)
Primer (29)
Satin Black (13)
Satin Gold W/Simulated Ring (2)
Semi-gloss Black (7)
Stainless Steel (42)
Textured Black (90)
Textured Black Powder coat (2)

PRICE RANGE

$1 to $99 (6)
$100 to $199 (8)
$300 to $399 (3)
$400 to $499 (4)
$500 to $749 (21)
$750 to $999 (30)
Over $1000 (196)

49 Product Groups

Switch to View Products

SORT BY

Fab Fours Premium Front Bumpers

From $1,619.99

Provides more tire clearance
Winch ready (Accepts up to 16,500 lb. winches or smaller)
3/4 inch D-ring Mounts
1/4 inch Boxed mounting system with adjustability to allow a custom fit
Fab Fours signature injection molded light housings
Fab Fours 90mm fog and 60mm turn indicator lights included FREE with the bumper
2 Stage matte black powder coat or bare steel (-B instead of -1)
Combination of 1/4 inch and 3/16 inch steel construction
100% Made in the USA
California Residents: WARNING

From $1,619.99

4.1 4.1 (104)

Fab Fours Vengeance Front Bumpers

From $1,789.99

Available in 2 Stage Black Powder Coat or Bare Steel
Overall design and fit is inchHigh and Tight inch to the contours of the vehicle
The Vengeance Series front bumper is sensor compatible
Allows for an integrated 20 inch LED light bar in the center (light bar not included)
Mounting options on each side for (2) 2x2 Dually lights to give you maximum LED light coverage
Lower cutout to provide airflow to intercoolers
Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
Sensors optimized for vehicles with suspension lifts - stock height trucks may require tuning the sensor mount and will require special care
Available in a no guard or pre-runner guard option.
California Residents: WARNING

From $1,789.99

4.6 4.6 (18)

Fab Fours Premium Rear Bumpers

From $1,379.99

Bare steel or Black Powder coat
3/16 inch steel construction
Fab Four's signature knife edge and recessed D-Ring mounts
CB antenna mount
Compatible with factory receiver hitch
Tire carrier sold separately
California Residents: WARNING

From $1,379.99

4.3 4.3 (58)

ARB Deluxe Winch Front Bumpers

From $1,193.00

Deluxe Winch Bar
Black
OEM Tow Points
Air Bag Compatible
Use with OE Buffers And Fog Lights
California Residents: WARNING

From $1,193.00

4.5 4.5 (228)

Poison Spyder Tire Carrier Delete Plates

From $57.99

Poison Spyder Customs Tire Carrier Delete Plates fit perfectly over the raised vent area in the center of the tailgate
Textured black powder coat for durability
Easily installs using the stock tire carrier mounting bolts.
California Residents: WARNING

From $57.99

4.3 4.3 (18)

Fab Fours Vengeance Rear Bumpers

From $1,419.99

Available in Bare Steel and Fab Fours 2 Stage Black Powder Coat
Two front-side openings allow light options
(4) 2x2 Dually lights or (2) 6 inch light bars (lights are not included)
11gauge US Steel Construction
Sensor compatible
Retain OEM Receiver Hitch and Wiring Location
11gauge US Stee
Weight: 65 lbs.
U.S. Steel Construction
100% Made in the USA
California Residents: WARNING

From $1,419.99

4.7 4.7 (14)

Body Armor 4x4 Front Bumpers

From $53.54

Front winch bumper
Textured Black powder coat finish
4.5 inch Light pockets
3/16 inch thick steel plate construction
California Residents: WARNING

From $53.54

4.6 4.6 (69)

Warn Elite Series Front Bumpers

From $1,685.99

Black powder coat wrinkle finish
Ends are tapered for increased approach angles
Welded eyelets to mount D-shackles
Minimal drilling and cutting required
California Residents: WARNING

From $1,685.99

4.3 4.3 (18)

Road Armor Stealth Series Front Bumpers

From $1,090.18

Proudly made in Texas, USA
Hot rolled and laser cut 3/16 inch Plate Steel
1/4-inch-thick internal mounting brackets and gussets
all guard tubing is .120-wall
5 Stage Powdercoat Finish - Highly scratch resistant
Lights are not included
Combat Proven and Trusted by the United States Military, life time guarantee against breakage
California Residents: WARNING

From $1,090.18

4.1 4.1 (3083)

Warn Rock Crawler Front Bumpers

From $592.99

Black powder coat
Tough and durable
Ends are tapered for increased approach angles
Welded eyelets to mount D-shackles
Pre-drilled holes to mount lights
California Residents: WARNING

From $592.99

3.9 3.9 (16)

Addictive Desert Designs Stealth Fighter Front Bumpers

From $2,230.98

Laser Cut Skid plates, Tabs and Plates for a Precise Fit
Direct fit – No Cutting or Welding required
Stainless Steel Hardware
California Residents: WARNING

From $2,230.98

4.6 4.6 (56)

Warn Ascent Front Bumpers

From $2,102.99

Angled design sits high, to maintain maximum ground clearance and approach angles
Winch ready - accepts most WARN mid-frame (footdown) winches up to 12,000 pounds: ZEON and ZEON Platinum, 9.5cti, 9.5 xp, XD9000i, XD9000, M8000, and VR winches.
Bumper features integrated dual light ports to mount auxiliary flood or spot sights (lights sold separately)
Welded recovery points, ready for D-shackles (sold separately)
Durable black textured powder coat over 11-gauge steel withstands rigorous salt spray testing
Bumper accommodates oversize tires
Easy to install - Pre-drilled bolt holes and cutouts make it easy to mount a WARN winch, even after bumper install
California Residents: WARNING

From $2,102.99

4.7 4.7 (10)

Warn Elite Series Rear Bumpers

From $1,399.99

Warn Jeep rear bumper is covered in a black powder coat finish
This Wrangler rear bumper has D-ring eyelets for more increased recovery options
California Residents: WARNING

From $1,399.99

4.0 4.0 (5)

Body Armor 4x4 Rear Bumpers

From $118.99

Textured black powder coat
Plate steel construction
With swing arm post only, does not include tire carrier
California Residents: WARNING

From $118.99

4.2 4.2 (46)

Addictive Desert Designs Stealth Fighter Rear Bumpers

From $1,571.38

3/16 inch and 1/8 inch Plate used to strengthen and reduce weight
Laser Cut Skid plates, Tabs and Plates for a Precise Fit
Direct fit – No Cutting or Welding required
California Residents: WARNING

From $1,571.38

3.9 3.9 (24)

Fab Fours Elite Rear Bumpers

From $1,049.99

Combination Pipe and Smooth Plate Construction
Matte Black Powder Coat or Bare Steel (-B instead of -1)
Pre-drilled sensor holes
Retains OEM receiver hitch and wiring locations
100% Made in the USA
California Residents: WARNING

From $1,049.99

5.0 5.0 (3)

Warn Heavy Duty Bumpers

From $3,306.99

Warn Heavy Duty Bumper
Black Powder Coat
With out Brush Guard
For use with all Warn large frame winches including 16.5ti
Includes a set of WARN W350F Wireless Fog Lamps
California Residents: WARNING

From $3,306.99

Warn Ascent Rear Bumpers

From $1,582.99

The Warn Jeep rear bumper angled design sits high, to maintain maximum ground clearance and approach angles
Winch ready - accepts most WARN mid-frame (footdown) winches up to 12,000 pounds: ZEON and ZEON Platinum, 9.5cti, 9.5 xp, XD9000i, XD9000, M8000, and VR winches.
Bumper features integrated dual light ports to mount auxiliary flood or spot sights (lights sold separately)
Welded recovery points, ready for D-shackles (sold separately)
Wrangler rear bumper has a durable black textured powder coat over 11-gauge steel withstands rigorous salt spray testing
Bumper accommodates oversize tires
Easy to install - Pre-drilled bolt holes and cutouts make it easy to mount a WARN winch, even after bumper install
California Residents: WARNING

From $1,582.99