Synergy Manufacturing Track-Bar Conversion Kit for Dodge

From $500.00

• Eliminates the weak link in the otherwise stout 4x4 Dodge chassis
• Converts the stock ball-joint style TB to the newer 03-current bushing style track-bar
• Compatible on trucks with -1 inch lift to +3 inch of lift
• Tightens up steering and suspension feel and helps eliminate dreaded inchDeath Wobble inch
• Laser cut, CNC bent and precision welded
• Grey Powdercoat finish for maximum corrosion resistance
• Bolt on installation
• Make in the USA
• California Residents: WARNING

Synergy Manufacturing Synergy Lithium Chassis And Bearing Grease

From $30.00

Body Armor 4x4 Flat Style Tail Light Guards

From $122.99

• Tail Light Guard
• Textured Black Powder Coat
• California Residents: WARNING

Body Armor 4x4 Cargo Rack Adapters

From $99.99

• Designed to fit all Body Armor Roof Racks
• Works on any tube with a 2 inch diameter
• Textured black
• California Residents: WARNING

Synergy Manufacturing Bolt-on Rear Track Bar Brackets

From $220.00

• This bracket raises the vehicles axle side track bar mount
• The vehicles rollcenter is raised, reducing body roll and dramatically improving overall handling
• Special bolton design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Fixed Rear Lower Control Arms

From $315.00

Synergy Manufacturing High Clearance Rear Long Arm Lower Control Arms

From $530.00

Synergy Manufacturing Drop Pitman Arms

From $50.00

• Pitman arm gives a 3.75 inch drop
• Compatible with factory tie rod ends
• Forged from high strength steel
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Rear Coil Wedges

From $30.00

• Polyurethane Rear Coil Wedges
• Keeps rear springs from bowing irregularly when suspension lifts are used
• Fixes the common problem of the rear springs rubbing the rear trackbar/trackbar bracket when aftermarket CV driveshafts are used
• Corrects the rear axle mount spring perch angle when aftermarket CV driveshafts are used
• Sold As A Pair
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Rear Stretch Bracket Kit

From $500.00

• Synergy Manufacturing Rear Stretch Bracket Kit allows 2 Door JK's to be stretched with the Synergy 8 inch stretch kit while retaining the factory style coil spring and shock setup
• The Rear Stretch Bracket Kit Relocates upper coil spring mounts and upper shock mounts back 8 inches
• The Synergy Manufacturing Rear Stretch Bracket Kit is designed to be used in conjunction with Synergy 8032 rear 8 inch stretch brackets and long arms
• California Residents: WARNING

Synergy Manufacturing Suspension Hardware Kit

From $125.00

• Includes hardened extra thick washers that will not deform or contort like standard washers
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Front Sway Bar Links

From $115.00

• Sway Bar Links
• Front
• 100% bolt on components
• Made from 11/16" solid 1018 steel and are clear zinc plated for maximum corrosion resistance
• Will Sold as a pair
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Extended Brake Line Kit

From $100.00

• DOT approved brake line kit
• For JKs with up to 4.5 inch of lift
• Measures 25.07 inch in overall length
• Features a special Kevlar liner in addition to the stainless steel braided cover
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Weld-On Rear Track Bar Brackets

From $100.00

• Weld-On rear track-bar bracket designed to replace the weak factory track bar bracket
• Replace the thin factory brackets on a stock axle or use for swapping any axle
• Multiple Track-bar holes for suspension adjustments
• This bracket requires the use of a minimum 3" rear bump stop spacer for clearance with the exhaust
• California Residents: WARNING

Synergy Manufacturing FOX/Synergy Steering Stabilizer Relocation Kit

From $300.00

• Manufactured from high strength 3/16 inch steel
• Grade 8 Hardware
• Powdercoated for corrosion resistance
• Bolt on components
• Fits Right Hand Drive Only
• Made in the U.S.A
• California Residents: WARNING

Synergy Lift Coil Springs

From $1,480.00

• Lift coil springs
• Synergy coils offer excellent off road performance while preserving ride quality
• Progressively wound
• keeps spring from coming unbound at suspension droop
• Progressively wound spring eliminates annoying spring clanking found on most suspension kits
• Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
• Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
• Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
• Sold in a pair
• California Residents: WARNING

Synergy Manufacturing Front & Rear Brake Line Relocation Kit

From $35.00

• The Synergy Manufacturing Brake Line Relocation Kits are manufactured from high strength 1/8 inch steel & zinc plated for corrosion resistance
• The Brake Line Relocation Kits are designed to relocate the factory brake lines so that they can be retained when lifting the vehicle up to 3.0 inches taller than stock
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• California Residents: WARNING

Body Armor 4x4 Tubular Front Bumpers

From $860.99

• Black powder coat
• 2 inch .120 wall tubing
• Light mount
• D-ring mount
• California Residents: WARNING

Synergy Manufacturing HD Front Lower Coil Spring Mounts

From $150.00

• Synergy Manufacturing HD Front Lower Coil Spring Mounts are designed to replace stock Jeep JK front lower coil mounts that are prone to failure
• The HD Front Lower Coil Spring Mounts are laser cut and cnc bent from 3/16 inch steel and have a 3/8-16 threaded integrated bump stop pad
• The Synergy Manufacturing HD Front Lower Coil Spring Mounts have a weld on design and are perfect for users who are re-tubing or building a custom axle with coil springs
• California Residents: WARNING

Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING

Synergy Manufacturing Control Arm Cam Bolt Kit

From $45.00

• Synergy 9/16" Control Arm Cam Bolt Kit
• Cam bolts are manufactured from high carbon heat treated steel
• All included components are zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Cam bolt offers 1/2" adjustment in either direction
• The bolt will work on a mounting width of 2.25 - 3"
• California Residents: WARNING

Synergy Manufacturing Spare Tire Relocation Bracket

From $90.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Side Plate Mounting Kit (Arms Only)

From $75.00

• (2) Side Plate Mounting Arms only
• Jeep JK, 4 Door
• Made in the USA
• California Residents: WARNING

Synergy Tie Rod Ends

From $60.00

• Outperforms the factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesnt neck down at base) and elimination of the nylon ball race.
• California Residents: WARNING