Rolling into Wheel & Tire Month! Shop Now

Direct Fit Bumper SHOP 4WP's HUGE SELECTION SHOP 4WP's HUGE SELECTION

REFINE BY:

Brand

Fitment

Universal Fit (2)

Material

Steel (68)

Style

ATV (1)

Tire Carrier

No (62)
Yes (5)

Width

Full (55)
Mid (4)
Stubby (9)

Price Range

$1 to $99 (5)
$100 to $199 (4)
$200 to $299 (16)
$300 to $399 (11)
$400 to $499 (12)
$500 to $749 (43)
$750 to $999 (31)
Over $1000 (140)

63 Product Groups

Switch to View Products

SORT BY

Poison Spyder RockBrawler Rear Bumpers

From $769.99

The Poison Spyder Rear Stinger Wrangler rear bumper is available in Bare Steel or Black Powder Coat
3/16 inch plate steel
Maximize performance on the toughest trails
High clearance, multi-faceted design Jeep rear bumper
California Residents: WARNING

From $769.99

4.3 4.3 (32)

Fab Fours Premium Front Bumpers

From $2,679.99

Provides more tire clearance
Winch ready (Accepts up to 16,500 lb. winches or smaller)
3/4 inch D-ring Mounts
1/4 inch Boxed mounting system with adjustability to allow a custom fit
Fab Fours signature injection molded light housings
Fab Fours 90mm fog and 60mm turn indicator lights included FREE with the bumper
2 Stage matte black powder coat or bare steel (-B instead of -1)
Combination of 1/4 inch and 3/16 inch steel construction
100% Made in the USA
California Residents: WARNING

From $2,679.99

4.1 4.1 (104)

Fab Fours Vengeance Front Bumpers

From $1,399.99

Available in 2 Stage Black Powder Coat or Bare Steel
Overall design and fit is inchHigh and Tight inch to the contours of the vehicle
The Vengeance Series front bumper is sensor compatible
Allows for an integrated 20 inch LED light bar in the center (light bar not included)
Mounting options on each side for (2) 2x2 Dually lights to give you maximum LED light coverage
Lower cutout to provide airflow to intercoolers
Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
Sensors optimized for vehicles with suspension lifts - stock height trucks may require tuning the sensor mount and will require special care
Available in a no guard or pre-runner guard option.
California Residents: WARNING

From $1,399.99

4.6 4.6 (18)

Fab Fours Premium Rear Bumpers

From $1,839.99

Bare steel or Black Powder coat
3/16 inch steel construction
Fab Four's signature knife edge and recessed D-Ring mounts
CB antenna mount
Compatible with factory receiver hitch
Tire carrier sold separately
California Residents: WARNING

From $1,839.99

4.3 4.3 (58)

Smittybilt XRC Atlas Rear Bumpers

From $1,155.99

Smittybilt Wrangler rear bumper is coated in a two-stage textured matte Black finish
Hitch
Available with and without Tire carrier
Smittybilt limited lifetime warranty on this Jeep rear bumper
California Residents: WARNING

From $1,155.99

3.8 3.8 (36)

Poison Spyder BFH Rear Bumpers

From $458.99

The Poison Spyder Customs BFH™ Wrangler rear bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit.
Recovery Shackle Tabs are machined from 1" thick plate steel
This Jeep rear bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep.
NOTE: Install requires cutting of stock frame rails!
California Residents: WARNING

From $458.99

4.8 4.8 (4)

Fab Fours Front Grumper Bumpers

From $3,809.99

Removable inserts for customization options
Provides greater tire clearance
Winch Ready-Accepts Warn Zeon Winches
Integrated D-Ring mounts that hold up to 7/8 shackle
11-gauge steel construction
100% Made in the USA
California Residents: WARNING

From $3,809.99

3.8 3.8 (17)

Rampage Recovery Front Bumpers

From $574.99

Black powder coat
Custom welded Shackle mounts with 3/4 shackle d-rings
3/16 inch steel plate design
Two 4 inch light openings (Lights sold separately)
California Residents: WARNING

From $574.99

4.4 4.4 (24)

Fab Fours Black Steel Front Ranch Bumpers

From $1,729.99

Combination Pipe and Tread Plate Construction
Gloss Black Powder Coat or Bare Steel (-B instead of -1)
Back up lights included
Pre-drilled sensor holes
Retains OEM receiver hitch and wiring locations
100% Made in the USA
California Residents: WARNING

From $1,729.99

4.3 4.3 (27)

Fab Fours Vengeance Rear Bumpers

From $1,099.99

Available in Bare Steel and Fab Fours 2 Stage Black Powder Coat
Two front-side openings allow light options
(4) 2x2 Dually lights or (2) 6 inch light bars (lights are not included)
11gauge US Steel Construction
Sensor compatible
Retain OEM Receiver Hitch and Wiring Location
11gauge US Stee
Weight: 65 lbs.
U.S. Steel Construction
100% Made in the USA
California Residents: WARNING

From $1,099.99

4.7 4.7 (14)

Warn Elite Series Front Bumpers

From $1,058.99

Black powder coat wrinkle finish
Ends are tapered for increased approach angles
Welded eyelets to mount D-shackles
Minimal drilling and cutting required
California Residents: WARNING

From $1,058.99

4.3 4.3 (18)

Rampage Recovery Rear Bumpers

From $910.99

Rampage Recovery Wrangler rear bumpers are available in Gloss Black and Textured Black powder coat
Available with and without tire carrier
Custom welded Shackle mounts with 3/4 inch Shackle D-rings
Durable powder coat finish
3/16 inch steel plate design
Lights sold separately for this Jeep rear bumper
California Residents: WARNING

From $910.99

5.0 5.0 (1)

Warn Rock Crawler Front Bumpers

From $1,294.99

Black powder coat
Tough and durable
Ends are tapered for increased approach angles
Welded eyelets to mount D-shackles
Pre-drilled holes to mount lights
California Residents: WARNING

From $1,294.99

3.9 3.9 (16)

Warn Ascent Front Bumpers

From $1,747.99

Angled design sits high, to maintain maximum ground clearance and approach angles
Winch ready - accepts most WARN mid-frame (footdown) winches up to 12,000 pounds: ZEON and ZEON Platinum, 9.5cti, 9.5 xp, XD9000i, XD9000, M8000, and VR winches.
Bumper features integrated dual light ports to mount auxiliary flood or spot sights (lights sold separately)
Welded recovery points, ready for D-shackles (sold separately)
Durable black textured powder coat over 11-gauge steel withstands rigorous salt spray testing
Bumper accommodates oversize tires
Easy to install - Pre-drilled bolt holes and cutouts make it easy to mount a WARN winch, even after bumper install
California Residents: WARNING

From $1,747.99

4.7 4.7 (10)

Warn Elite Series Rear Bumpers

From $1,247.99

Warn Jeep rear bumper is covered in a black powder coat finish
This Wrangler rear bumper has D-ring eyelets for more increased recovery options
California Residents: WARNING

From $1,247.99

4.0 4.0 (5)

Addictive Desert Designs Honeybadger Rear Bumpers

From $2,626.99

Lockable Storage Space
Bumper Color: Hammer Black
Panel Color: Satin Black
Light Mounts
Made in the USA
California Residents: WARNING

From $2,626.99

Rampage Double Tube Front Bumpers

From $206.99

Available in Polished, Marine Grade Stainless or Black Powder Coat
No rusting, flaking or peeling - guaranteed on Polished Stainless!
Euro Grille Guard can be used with Tube bumper or factory bumpers
California Residents: WARNING

From $206.99

4.7 4.7 (6)

Rugged Ridge XHD Front Bumpers

From $799.97

Black powder coat
Steel
California Residents: WARNING

From $799.97

4.9 4.9 (14)

Westin DiamondStep Universal Style Rear Bumpers

From $242.99

Warrior Jeep rear bumper in the popular diamond tread design
Full size tongue weight 800lbs and 8000lbs trailer weight
Durable 7 gauge hitch plate for fullsize
Downsize and compact are 350lbs tongue weight and 3,500lbs is trailer weight certified
Please note that images are a representation of all applications and some may not have the cut out ends when fitting a small pickup.
Mount kit required for Wrangler rear bumper
California Residents: WARNING

From $242.99

4.3 4.3 (21)

Fab Fours Black Steel Front Bumpers

From $1,729.99

Combination Pipe and Tread Plate Construction
Gloss Black Powder Coat or Bare Steel (-B instead of -1)
Bolt-on tow hooks NOW included
Light Mounts for Factory Fog Lights
Optional Bolt-on Winch Mount (Accepts up to 12,000 lb. winches or smaller)
Optional Bolt-on 1 inch D-ring mounts
100% Made in the USA
California Residents: WARNING

From $1,729.99

Rampage Double Tube Rear Bumpers

From $197.99

Available in Polished, Marine Grade Stainless or Black Powder Coat
No rusting, flaking or peeling - guaranteed on Polished Stainless!
Euro Grille Guard can be used with Tube bumper or factory bumpers
California Residents: WARNING

From $197.99

4.3 4.3 (3)

Poison Spyder RockBrawler Bumpers

From $579.99

This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
The ends of the bumper extend far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access to vertical obstacles.
The two D-ring shackle mounts are CNC-machined from 1 inch plate steel to provide brute strength for the most demanding recovery operations.
Accepts most major manufacturer's winches up to 15,000 lbs. capacity
Recessed light mounts are provided for retention of the factory fog lamps or aftermarket off-road lamps
California Residents: WARNING

From $579.99

5.0 5.0 (1)