Rolling into Wheel & Tire Month! Shop Now

Bumper Stubby Bumper

REFINE BY:

Brand

Fitment

Direct Fit (51)

Material

Steel (51)

Price Range

$200 to $299 (1)
$300 to $399 (7)
$400 to $499 (7)
$500 to $749 (13)
$750 to $999 (15)
Over $1000 (8)

26 Product Groups

Switch to View Products

SORT BY

Poison Spyder Brawler Lite Front Bumpers

From $799.99

The RockBrawler™ is fabricated from 3/16 inch steel plate, CNC laser cut and brake-formed for a precise fit.
The Stinger is made of 1.75 inch X .120 wall DOM tubing.
The two D-ring shackle mounts are CNC-machined from 1 inch plate steel.
The integrated winch mount accepts most major manufacturer's winches up to 15,000 lbs.
Another characteristic of the RockBrawler™ is its amazing tire clearance.
RockBrawler™ bumpers are shipped as BARE STEEL.
California Residents: WARNING

From $799.99

4.7 4.7 (19)

Smittybilt SRC Front Bumpers

From $299.99

Two-stage textured matte black powdercoat finish
2 tabs to mount lights
Wide opening allows for winch installation
1/4 inch thick custom mounting brackets
Welded d-ring tabs
5-year limited warranty
California Residents: WARNING

From $299.99

4.6 4.6 (114)

Poison Spyder BFH Front Bumpers

From $449.99

This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible.
It is no wider than the Jeep's frame rails
CNC laser-cut from a single piece of high strength 3/16 inch plate steel
The BFH™ bumper features an integrated winch mount and one-piece design.
At a mere 35 pounds, the BFH™ is among the lightest bumpers on the market.
Even fully outfitted with Brawler Bar and Heavy Duty Shackle Tabs, the BFH™ weighs only 43 pounds!
California Residents: WARNING

From $449.99

4.5 4.5 (46)

Fab Fours Front Grumper Bumpers

From $1,829.99

Removable inserts for customization options
Provides greater tire clearance
Winch Ready-Accepts Warn Zeon Winches
Integrated D-Ring mounts that hold up to 7/8 shackle
11-gauge steel construction
100% Made in the USA
California Residents: WARNING

From $1,829.99

3.8 3.8 (17)

Smittybilt XRC GEN1 Front Bumper

From $529.99

Two stage matte black powder coat finish
Manufactured from 3/16" cold roll steel
1.75" 120 wall over rider and kickers
Raised corners for better entry and exit under the most extreme conditions
Solid mount D-Rings - Welds on the inside and out
Solid plate center section that wraps the frame horns and lower cross member
Built-in winch plate to accommodate up to 10k winch
One-piece welded design
5-year limited warranty
California Residents: WARNING

From $529.99

4.4 4.4 (62)

Body Armor 4x4 Front Bumpers

From $415.64

Front winch bumper
Textured Black powder coat finish
4.5 inch Light pockets
3/16 inch thick steel plate construction
California Residents: WARNING

From $415.64

4.6 4.6 (69)

Warn Elite Series Front Bumpers

From $831.99

Black powder coat wrinkle finish
Ends are tapered for increased approach angles
Welded eyelets to mount D-shackles
Minimal drilling and cutting required
California Residents: WARNING

From $831.99

4.3 4.3 (18)

Warn Rock Crawler Front Bumpers

From $592.99

Black powder coat
Tough and durable
Ends are tapered for increased approach angles
Welded eyelets to mount D-shackles
Pre-drilled holes to mount lights
California Residents: WARNING

From $592.99

3.9 3.9 (16)

Rugged Ridge XHD Front Bumpers

From $549.99

Black powder coat
Steel
California Residents: WARNING

From $549.99

4.9 4.9 (14)

Rugged Ridge Spartacus Front Bumpers

From $599.99

Available in different kits
High strength 11-gauge steel
Bumpers can easily be changed between wide or narrow configurations
Strong, light weight construction
Adaptable function and style
California Residents: WARNING

From $599.99

5.0 5.0 (2)

Rampage Trailram Modular Bumper

From $987.99

Integrated single-row 20 inch LED light bar
Centerpiece Stubby with 3 inch steel cap welded ends
Manufactured in America from 3⁄16 inch steel
Factory mounting points for easy installation
Textured black powder coated finish
Backed by a five year limited warranty
Proudly made in the USA
California Residents: WARNING

From $987.99

ARB Stubby Bars

From $739.00

FTextured black powder coat
Manufactured from 4mm laser cut and folded steel sheet
20mm 350 grade steel recovery points
76mm x 2mm ERW center frame tube
All hardware zinc plated for corrosion resistance
All exterior surfaces are CMT pulse welded
5 stage anti corrosion pre-treatment
Includes fully illustrated fitting instructions
California Residents: WARNING

From $739.00

3.5 3.5 (4)

Fab Fours Hardcore Stubby Front Bumpers

From $1,169.99

Designed for maximum tire clearance
Hi-Lift Jack points
Winch ready (Accepts up to 10,000 lb. winches or smaller)
Accepts the WARN Power plant
Light cut outs for factory fog lights
Optional 90mm Fab Fours' fog light kit (JKST-LA)
3/4 inch D-ring mounts
2 Stage matte black powder coat or bare steel (-B instead of -1)
3/16 inch Steel construction
100% Made in the USA
California Residents: WARNING

From $1,169.99

4.8 4.8 (9)

Bestop HighRock 4x4 Narrow-Profile Front Bumpers

From $369.99

3/16 inch laser cut steel with E-coat and wrinkle finish powder coat top layer
JK bumper measures 41.5 inch wide, 11 inch deep, 8 inch high
TJ bumper measures 35.5 inch wide, 9 inch deep, 5.5 inch high
JK model has welded fairlead plate
TJ winch plate included separately with bumper.
JK model comes standard with pre-cut holes and molded plastic light cans to accommodate OEM lights
Optional tubular Grille Guards available in textured satin or matte black finish or stainless steel.
D-Ring Attachment ears extend through bumper and fully mig-welded front and back. D-Rings sold separately
Bolt-on, no-drill installation to factory mounting locations
Accessories shown are not included.
California Residents: WARNING

From $369.99

4.4 4.4 (18)

Rugged Ridge All Terrain Modular Front Bumpers

From $399.99

Fits 2007 to 2016 JK Wrangler, Rubicon and Unlimited
2 and 4-door models
Polished stainless
Protects fenders
Sold as a pair
Must be used with Rugged Ridge center section
California Residents: WARNING

From $399.99

TeraFlex Front Bumpers

From $567.99

Black
1.75 inch mandrel bent tube guard
Integrated winch mount
Fits all major centered winch models
Allows use of factory fog lights
2012 and newer models require vacuum relocation bracket sold separately, part number TER4403100
California Residents: WARNING

From $567.99

5.0 5.0 (1)

Westin Scope Front Bumpers

From $1,028.99

7 gauge steel
1-piece fully welded construction
Fits most medium frame 8,000-12,000 lbs
Mounting brackets mount directly to frame
Available in textured black finish
California Residents: WARNING

From $1,028.99

Wilco Offroad Replacement Front Bumpers

From $306.83

Innovative new replacement bumpers offer high-strength and reduced weight
57 pound complete standard bumper
Protects the vehicle, reduces weight
Steel slides better over rock than aluminum
California Residents: WARNING

From $306.83

Rugged Ridge HD Front Bumpers

From $549.99

Available in Stubby or Full Width
Engineered to mount most any aftermarket winch
Built-in jack lifting points at every corner
Massive recovery hooks, each one dual-drilled to work with both 3/4 and 7/8-inch shackles
Satin black powder coat finish
Limited 5-year warranty

From $549.99

3.7 3.7 (20)

Rugged Ridge XOR Front Bumpers

From $349.99

Built from 5mm-thick steel plate
Built-in skid plate
Integrated top-mount winch plate
Massive 1”-thick shackle mounts
Accommodates 3/4-inch shackles (not included)
Recessed fog light pockets
Works with standard OE fog lights
Does not work with Altitude or LED fog lights
Bolt-on installation
Mounting hardware included for installation
No drilling or cutting required

From $349.99

4.1 4.1 (7)

Rugged Ridge Venator Front Bumpers

From $899.99

Muscular stamped steel construction
Patented design features sculpted contours and sweeping arches
Features built-in winch plate and massive 1-inch thick recovery hooks
Octagonal pockets accept factory JL / JT fog lights
Easy bolt-on installation

From $899.99

3.6 3.6 (10)

Rugged Ridge Arcus Front Bumpers

From $599.99

High-strength 11-gauge steel shell surrounding a 1/4-inch thick steel winch plate
Capable of holding most model winches up to a 12.5k lb. rating
Accepts Hawse or roller-style fairleads
Massive 1-inch thick recovery hooks
Each hook is dual cross-drilled so they accept both 7/8 and 3/4-inch D-rings
Built-in fog light pockets
Accepts both factory Sport & Sahara fog light assemblies with no modification
High-quality satin black powder coat finish with a fine texture

From $599.99

4.0 4.0 (10)