Smittybilt XRC Rear Bumpers

From $1,099.99

• Smittybilt Jeep rear bumper is covered in Black powder coat
• Constructed of 3/16 inch cold rolled steel
• Built in class III receiver hitch and two d-ring mounts
• Available with and without tire carrier for this Wrangler rear bumper
• 5 year limited warranty
• California Residents: WARNING

Smittybilt SRC GEN2 Rear Bumpers

From $629.99

• Smittybilt SRC Gen2 Jeep rear bumper is covered in Two-stage textured matte black powdercoat finish
• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel
• Smittybilt limited lifetime warranty
• LED lights included
• Modular design tire carrier can be added (sold separately) to the Wrangler rear bumper
• Fender-to-fender protection
• Aux back up light cut out provided
• Class III hitch for true towing with towable D-ring mounts
• Anti-rattle provision provided for receiver hitch
• Works with XRC GEN2 tire carrier (#76857)
• California Residents: WARNING

Smittybilt XRC Tire Carriers

From $280.49

• Smittybilt Two-stage textured matte black finish Jeep spare tire carrier
• Manufactured from 3/16-inch cold rolled steel with
• Bolt on designJeep tire carrier
• 5 year limited warranty
• California Residents: WARNING

Smittybilt SRC GEN2 Front Bumpers

From $689.99

• Welcome to the Smittybilt SRC Gen2 Front Bumper for Jeep
• Solid d-ring and jack point mount - welded on the inside and out!
• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
• Fender to fender protection
• 2 inch 120 Wall over rider and kickers
• Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
• O.E. fog light provision
• Manufactured from 3/16 inch cold rolled steel
• Towable D-ring mounts
• Two-stage textured matte black powdercoat finish with 5-year limited warranty
• Smittybilt Advantage limited lifetime warranty: Great choice for a Wrangler front bumper
• California Residents: WARNING

Smittybilt Pivot HD Oversize Tire Carriers

From $249.99

• Smittybilt strong monocoque aluminum construction eliminates tailgate sag with this Jeep spare tire carrier
• Adjustable tire mount with 37 inch maximum tire size
• Increases load carrying capacity to 135 lbs with this Jeep tire carrier
• Forged chrome mounting brackets ? 30% stronger than steel
• Third brake light mount included
• Protective EPDM gaskets included to protect factory finish
• S/B2740-03 optional brackets to mount trail jack
• Maintains the easy single action of opening and closing of the tailgate
• No drilling required - you can maintain OE bumpers, if preferred
• California Residents: WARNING

Smittybilt M1 Front Bumpers

From $1,399.99

• Two stage matte Black finish powder coat finish
• Manufactured from 3/16 inch & 1/4 inch cold roll steel
• Ultra Bright Driving & Fog Lights
• Solid Mount D-Rings - Welds on the inside and out
• Solid plate center section that wraps the frame horns and lower cross member
• Smittybilt Advantage Warranty - Limited Lifetime Warranty
• California Residents: WARNING

Smittybilt SRC Front Bumpers

From $299.99

• Two-stage textured matte black powdercoat finish
• 2 tabs to mount lights
• Wide opening allows for winch installation
• 1/4 inch thick custom mounting brackets
• Welded d-ring tabs
• 5-year limited warranty
• California Residents: WARNING

Smittybilt XRC Atlas Rear Bumpers

From $1,119.99

• Smittybilt Wrangler rear bumper is coated in a two-stage textured matte Black finish
• Hitch
• Available with and without Tire carrier
• Smittybilt limited lifetime warranty on this Jeep rear bumper
• California Residents: WARNING

Smittybilt XRC GEN1 Front Bumper

From $359.99

• Two stage matte black powder coat finish
• Manufactured from 3/16" cold roll steel
• 1.75" 120 wall over rider and kickers
• Raised corners for better entry and exit under the most extreme conditions
• Solid mount D-Rings - Welds on the inside and out
• Solid plate center section that wraps the frame horns and lower cross member
• Built-in winch plate to accommodate up to 10k winch
• One-piece welded design
• 5-year limited warranty
• California Residents: WARNING

Smittybilt XRC Rock Crawler Winch Bumpers

From $359.99

• 2-stage Textured black powder coat
• Degree approach angles and raised corners
• 3/16 inch cold rolled steel
• Stinger is 1.75 inch tubing
• Accepts up to two 9 inch lights
• Bumpers bolt directly to your vehicle
• 5-year limited warranty
• California Residents: WARNING

Smittybilt SRC Rear Bumpers

From $289.99

• Smittybilt SRC Wrangler rear bumper is covered in a two stage textured black powder coat finish
• Dense zinc treated undercoating
• Expertly robotically welded
• Bumpers bolt directly to your vehicle
• Available with or without d-rings
• Jeep rear bumper is available with and without tire carrier
• California Residents: WARNING

Smittybilt SRC Classic Rock Crawler Front Bumpers

From $187.99

• Two-stage textured matte black powdercoat finish
• 1/4 inch steel plate design
• Zinc undercoat
• Bumpers bolt directly to your vehicle
• Requires no drilling or modifications
• 5-year limited warranty
• California Residents: WARNING

Smittybilt XRC Front Bull Bars

From $117.99

• Two-stage textured matte black powdercoat finish
• Requires front bumper part number S/B76810
• Manufactured from 1.75 inch tubing
• Two light tabs that can accommodate up to a 9 inch light
• Capable of mounting up to a 15,000 lb. winch
• 5-year limited warranty
• California Residents: WARNING

Smittybilt XRC Gen2 Front Bumpers

From $654.49

• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powdercoat finish - 5 year limited warranty
• Smittybilt limited lifetime warranty
• Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
• 1.75" diameter .120 wall overrider and kickers
• O.E. fog light provision and towable D-ring mounts
• California Residents: WARNING

Smittybilt XRC Gen2 Rear Bumpers

From $594.99

• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powdercoat finish - 5 year limited warranty
• Smittybilt limited lifetime warranty
• LED lights included
• Modular design tire carrier can be added (sold separately)
• Fender-to-fender protection
• Aux back up light cut out provided
• Class III hitch for true towing with towable D-ring mounts
• Anti-rattle provision provided for receiver hitch
• Works with XRC GEN2 tire carrier (#76857)
• California Residents: WARNING

Smittybilt Apollo Front Bumper

From $728.99

• High and tight design for maximum clearance
• 1.5" x .120" wall structural tubing with 1/8" and 3/16" laser cut cold rolled sheet metal
• Removable overrider with front camera provision
• Winch compatible up to 12K
• Fits all non-Rubicon model OE fog lights
• D-ring recovery and jack points

Smittybilt Adventure Series Front Bumpers

From $1,169.99

Smittybilt Apollo Rear Bumper

From $674.99

• Unique and aggressive stubby design
• Formed and shaped with robust appearance and solid performance
• 1.5" x .120" wall structural tubing with 1/8" laser cut cold rolled sheet metal
• Factory and HD Pivot tire carrier approved
• Auxiliary back up lights included
• D-ring recovery and jack points
• Robotically welded assembly for consistent penetration
• Use factory or Smittybilt JH46 Trailer Hitch with receiver for towing

Smittybilt M1 Rear Bumpers

From $1,199.99

• Two Stage Matte Black Finish powder coat Finish - 5 year Limited Warranty
• Manufactured from 3/16 inch & 1/4 inch cold roll steel
• Solid Mount D-Rings Welded on the inside and out
• Smittybilt Advantage Warranty
• California Residents: WARNING