Poison Spyder Rear Bumper Brace Kits

From $58.99

• 3/16 inch steel plate
• Gussetted brace
• California Residents: WARNING

Smittybilt XRC Front Bull Bars

From $117.99

• Two-stage textured matte black powdercoat finish
• Requires front bumper part number S/B76810
• Manufactured from 1.75 inch tubing
• Two light tabs that can accommodate up to a 9 inch light
• Capable of mounting up to a 15,000 lb. winch
• 5-year limited warranty
• California Residents: WARNING

Smittybilt Tube Bumper End Caps

From $13.99

• Sold as a pair
• Works with Smittybilt's 3 inch tube bumpers
• Direct fit replacement
• Black or Chrome
• California Residents: WARNING

Smittybilt XRC Gen2 Front Bumpers

From $654.49

• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powdercoat finish - 5 year limited warranty
• Smittybilt limited lifetime warranty
• Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
• 1.75" diameter .120 wall overrider and kickers
• O.E. fog light provision and towable D-ring mounts
• California Residents: WARNING

Smittybilt XRC Gen2 Rear Bumpers

From $594.99

• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powdercoat finish - 5 year limited warranty
• Smittybilt limited lifetime warranty
• LED lights included
• Modular design tire carrier can be added (sold separately)
• Fender-to-fender protection
• Aux back up light cut out provided
• Class III hitch for true towing with towable D-ring mounts
• Anti-rattle provision provided for receiver hitch
• Works with XRC GEN2 tire carrier (#76857)
• California Residents: WARNING

Smittybilt Stryker Rear Bumpers

From $699.99

• 3mm deep drawn formed steel
• Integrated d-ring and lift point
• Fits up to 7/8" d-rings (sold separately)
• Auxiliary backup light cut outs
• Removable mesh panels for customization
• Raised corners for increased departure angles

Smittybilt Apollo Front Bumper

From $728.99

• High and tight design for maximum clearance
• 1.5" x .120" wall structural tubing with 1/8" and 3/16" laser cut cold rolled sheet metal
• Removable overrider with front camera provision
• Winch compatible up to 12K
• Fits all non-Rubicon model OE fog lights
• D-ring recovery and jack points

Smittybilt Stryker Front Bumper

From $679.99

• 3mm deep drawn formed steel
• Winch compatible up to 12k
• Modular wings sold separately
• Includes light provisions
• Inegrated d-ring and lift points
• OE fog light provision
• Integrated overrider with 13" lightbar provision

Poison Spyder Crawler Rear Bumpers

From $789.99

• Compatible with Poison Spyder Frame Mounted Tire Carrier
• Large radius bends and die-formed features
• Integrated Class III Tow Hitch
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed mounts for LED backup lights
• California Residents: WARNING

Poison Spyder Bruizer Front Bumpers

From $839.99

• Compact design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
• Recessed winch mount
• Brawler Bar made of DOM tubing with tube gussets
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed light mounts accept LED cube lights
• California Residents: WARNING

Smittybilt Apollo Rear Bumper

From $674.99

• Unique and aggressive stubby design
• Formed and shaped with robust appearance and solid performance
• 1.5" x .120" wall structural tubing with 1/8" laser cut cold rolled sheet metal
• Factory and HD Pivot tire carrier approved
• Auxiliary back up lights included
• D-ring recovery and jack points
• Robotically welded assembly for consistent penetration
• Use factory or Smittybilt JH46 Trailer Hitch with receiver for towing

Smittybilt Stryker Bumper Wings

From $199.99

• Wings only - bumper sold separately, part number S/B76730

Smittybilt Orion Front Bumpers

From $809.99

• Smittybilt Orion Front Bumpers

Smittybilt Adventure Series Front Bumpers

From $1,299.99

Poison Spyder RockBrawler Rear Bumpers

From $499.99

• The Poison Spyder Rear Stinger Wrangler rear bumper is available in Bare Steel or Black Powder Coat
• 3/16 inch plate steel
• Maximize performance on the toughest trails
• High clearance, multi-faceted design Jeep rear bumper
• California Residents: WARNING

Poison Spyder Brawler Lite Front Bumpers

From $799.99

• The RockBrawler™ is fabricated from 3/16 inch steel plate, CNC laser cut and brake-formed for a precise fit.
• The Stinger is made of 1.75 inch X .120 wall DOM tubing.
• The two D-ring shackle mounts are CNC-machined from 1 inch plate steel.
• The integrated winch mount accepts most major manufacturer's winches up to 15,000 lbs.
• Another characteristic of the RockBrawler™ is its amazing tire clearance.
• RockBrawler™ bumpers are shipped as BARE STEEL.
• California Residents: WARNING

Poison Spyder Body Mounted Tire Carriers

From $999.99

• Poison Spyder Jeep Spare Tire Carrier
• Bare steel
• CNC laser cut
• Fit up to 40 inch tire and wheel combo on this Jeep tire carrier
• Mount for Hi-Lift jack
• Includes all mounting hardware
• California Residents: WARNING

Poison Spyder BFH Front Bumpers

From $449.99

• This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible.
• It is no wider than the Jeep's frame rails
• CNC laser-cut from a single piece of high strength 3/16 inch plate steel
• The BFH™ bumper features an integrated winch mount and one-piece design.
• At a mere 35 pounds, the BFH™ is among the lightest bumpers on the market.
• Even fully outfitted with Brawler Bar and Heavy Duty Shackle Tabs, the BFH™ weighs only 43 pounds!
• California Residents: WARNING

Poison Spyder BFH Rear Bumpers

From $329.99

• The Poison Spyder Customs BFH™ Wrangler rear bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit.
• Recovery Shackle Tabs are machined from 1" thick plate steel
• This Jeep rear bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep.
• NOTE: Install requires cutting of stock frame rails!
• California Residents: WARNING