RockJock 4x4 Antirock Sway Bar Kits

From $535.00

• Complete kit
• Includes Sway Bar, End Links, Bushings, Arms
• All Hardware and Mounting Brackets
• California Residents: WARNING

RockJock 4x4 Steering Stabilizer Mounting Components

From $51.00

• Designed to be used with RockJocks Currectlync tie rod
• Bracket plate
• Lock washers and nuts
• California Residents: WARNING

RockJock 4x4 Sway Bar End Links

From $33.00

Bushwacker LED Marker Light Kits

From $59.99

Bushwacker Trail Armor Mud Flaps

From $69.99

• OEM matte black finish
• Delivers ultimate protection from mud and other debris from tires
• Specifically designed to fit with Bushwacker Pocket Style Flares
• Provides an additional 10” of drop and 10” of width in tire coverage
• Made from tough and durable TPO material
• Invented and engineered in the USA

Bushwacker HyperForm Fender Flares

From $349.99

• UV resistant dual textured finish
• Resists chalking and designed to perfectly complement factory trim
• Built from durable, impact-resistant thermoplastic
• High clearance flare
• Cutting-edge DRLs with dual-output LEDs that provide a cool, classy accent that adds visibility and enhances safety
• Flat style
• Sold as a set of 4 or in pairs separately
• Includes all hardware necessary for installation
• All Bushwacker products are backed by a limited lifetime warranty against warping, cracking or other factory defects

Bushwacker Trail Armor Fender Delete

From $430.99

• Delivers maximum clearance by eliminating the factory flare
• Made of durable TPO material that protects the areas that are exposed when the flare is removed
• Provides maximum tire clearance with a polished look when flares are removed
• Rugged design covers all the fender holes for a light weight option and sleek body profile
• Flows with the contours of the Jeep and its rugged, chiseled styling
• Sold in complete sets of four to give front and rear coverage
• Easy no drill installation and all the necessary hardware is included
• Backed by an industry leading warranty

Bushwacker Trail Armor Frameless Soft Tops

From $1,227.99

• Rear fold-forward sunroof option for rear passengers
• Made of Premium 30 oz. triple-layered twill material for a quieter ride when closed
• DOT approved 40 mil - pressed, polished (thickest in the industry) tinted windows for utmost clarity
• Available in two styles: frameless fastback and a frameless bed "truck" top
• Exclusive front pockets over the visors for cell phone and gear storage
• Fastback models offers a rear storage bag to protect your windows when not in use
• Limited Lifetime Warranty
• California Residents: WARNING

Currie Pinion Seals

From $52.53

Currie Ball Joints

From $181.99

Currie Control Arm Brackets

From $55.00

• Laser cut 3/16in. steel
• Radiused to fit a 3in tube
• Weld-on
• Sold as a pair
• California Residents: WARNING

Currie Enterprises Currie 44 Front Crate Axle Assemblies

From $5,600.00

• Currie 44 high-pinion nodular iron center section with thicker walls and webbing to deliver superior strength and rigidity
• Large 3-inch diameter .375 wall axle tubes (left) are more than twice as strong as the stock 2.5-inch diameter .250 wall tubes
• Currie heavy duty forged inner knuckles (right) are significantly stronger that the stock knuckles (left) and are designed for serious off-road use with up to 37” tall tires
• Currie Performance 4340 Chromoly axles provide superior strength over OEM carbon steel axles
• Upper control arm mounts feature rebuildable Johnny Joints® for improved suspension articulation
• Lower control arm mounts are one piece construction with integrated skid plates to help fend off bracket seeking rocks
• 1350 pinion yoke provides increased strength over the stock companion flange
• Currie nodular-iron differential cover to defend against those unfortunate rock encounters
• California Residents: WARNING

Currie Enterprises Currie 60 Rear Crate Axle Assemblies

From $5,300.00

• Currie 60 high-pinion, radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Highest measured ground clearance of any 60 on the market (and that’s including the integrated skid plate), guess the other guys can’t read a tape measure
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Large diameter pinion bearings to handle the increased load of reverse geometry gears
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminating oil starvation issues
• Large 3-inch diameter .375 thick axle tubes deliver superior strength without sacrificing ground clearance or being overweight
• Currie Performance 40-spline 4340 chrome moly semi-floating axles, the largest and strongest standard axle in the industry
• Massive Set 80 axle bearings allow for larger axle diameter through the bearing for increased strength
• California Residents: WARNING

Currie Enterprises Currie 60 Front Crate Axle Assemblies

From $7,500.00

• Currie 60 high-pinion radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Large diameter outer pinion bearing (right) is designed for the demands of reverse rotation/high pinion housings. Stock low pinion bearing (left)
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminate oil starvation issues
• Large 3” diameter .375” thick wall axle tubes (left) are more than twice as strong as the stock Dana® 44 (right)
• Upper control arm mounts feature rebuildable Johnny Joints® for improved suspension articulation
• Big 13.250 inch diameter vented rotors (+1.3 inches larger than stock) provide the increased brake torque required for stopping large tires
• Lower control arm mounts are one piece construction with integrated skid plates to help fend off bracket seeking rocks
• California Residents: WARNING

Currie Enterprises Currie Extreme 60 Front Crate Axle Assemblies

From $9,850.00

• Currie Extreme 60 stage-2 high-pinion nodular iron center section is simply the strongest 60 series casting we offer, with 9 lbs. more reinforcement in critical areas over the already strong Stage-1 center section
• Radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Ring gear load bolt eliminates deflection, to dramatically increase the torque handling capacity
• Highest measured ground clearance of any 60 on the market (and that’s including the integrated skid plate), guess the other guys have trouble reading a tape measure
• Currie Performance 35-spline 4340 chrome moly inner and outer axles for superior end to end strength
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and extending bearing life
• Currie nodular iron differential cover with integrated upper control arm mount features rebuildable Johnny Joints® for superior articulation and service life
• Currie Currectlync® 1 5/8” diameter heat treated Chromoly tie rod for unsurpassed strength and reliability
• Big 13.250 rotors (+1.3 inch over stock) and large dual piston calipers provide the stopping power required for 37 inch and larger tires
• California Residents: WARNING

Currie Enterprises Currie 70 Front Crate Axle Assemblies

From $15,352.95

Currie Enterprises Currie 70 Rear Crate Axle Assemblies

From $14,000.00

RockJock 4x4 Suspension Lift Kits

From $1,438.00

RockJock 4x4 Antirock Sway Bar Arms

From $287.00

• Chromoly sway bar
• Forged chromoly offset sway bar arms
• Billet aluminum frame brackets

RockJock 4x4 Narrow Johnny Joints

From $35.99

RockJock 4x4 Johnny Joints

From $255.00