Icon Vehicle Dynamics 4.5 Inch Stage 1 Suspension System - K64560

• Fitment: Direct Fit
• 50% increase in wheel travel
• Less body-roll than stock truck
• 4.5" more travel from ride height to front bump stops
• Dual rate coil spring
• Lifetime guarantee that coil springs won't sag
• Clears 35" tall tires & 37" tall tires with minor trimming
• No change in towing capacity
• No drive shaft modifications needed
• 99% bolt-on system - no drilling,cutting or welding necessary for install
• Made in the USA
• Can use OEM wheels and tires
• Recommended aftermarket tires: 35" x 12.50" (larger tires may fit but fender trimming and modifications will be required)
• Notes: springs are rated for diesel engines only
• 08 - current Superduty models with gas engines may need exhaust modified to clear front driveshaft
• Radius arm / 4-link frame brackets will require minor drilling into frame to complete install
• Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Vehicle Dynamics 2.5 Inch Stage 1 Suspension System (Factory Air Ride) - K212511A

• Fitment: Direct Fit
• 4WD applications only
• For vehicles with factory air ride suspension
• ICON engineered dual rate coil springs with match tuned 2.0 Aluminum Series shocks
• Increased wheel travel and ride quality over stock with no change in towing capacity
• Less body roll than stock
• No drive shaft modifications needed
• Made in the USA
• Can fit OEM wheel and tires
• Aftermarket wheels: 8.5-9" wide wheel with 5.75" backspace
• Aftermarket tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required)
• Notes: springs are rated for diesel engines only, gas engine will yield slightly taller lift heights
• An adjustable track bar may be needed to realign the axle from left to right, or to add additional strength
• Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
• May not be compatible with other manufacturers aftermarket trackbars
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Vehicle Dynamics 2.5 Inch Stage 2 Suspension System (Performance) - K212512P

• Fitment: Direct Fit
• 4WD applications only
• Not for vehicles with factory air ride suspension
• ICON engineered dual rate coil springs with match tuned 2.5 Series reservoir shocks
• Increased wheel travel and ride quality over stock with no change in towing capacity
• Less body roll than stock
• No drive shaft modifications needed
• Made in the USA
• Can fit OEM wheels and tires
• Aftermarket wheels: 8.5-9" wide wheel with 5.75" backspace
• Aftermarket tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required)
• Notes: springs are rated for diesel engines only, gas engine will yield slightly taller lift heights
• An adjustable track bar may be needed to realign the axle from left to right, or to add additional strength
• Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
• May not be compatible with other manufacturers aftermarket trackbars
• Air bags recommended with performance rear springs if vehicle used for towing
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Vehicle Dynamics 2.5 Inch Stage 1 Suspension System - K213001

• Fitment: Direct Fit
• 4WD applications only
• Increased wheel travel and ride quality over stock with no change in towing capacity
• Vehicle specific tuned front and rear shocks for superior shock damping and control
• Adjustable coilovers from .75-2.5" of lift height
• 6061 Aircraft grade aluminum CNC machined components
• FK rod end bearings for extended longevity and minimal deflection
• 100% Bolt-on system - no drilling, cutting, or welding necessary for install
• Can use OEM wheels and tires
• Recommended aftermarket wheels: 8.5" wide wheel with 5" backspace
• Recommended aftermarket tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required)
• Note: shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Vehicle Dynamics 2.5 Inch Stage 2 Suspension System - K213002

• Fitment: Direct Fit
• 4WD applications only
• Increased wheel travel and ride quality over stock with no change in towing capacity
• Vehicle specific tuned front and rear shocks for superior shock damping and control
• Adjustable coilovers from .75-2.5" of lift height
• 6061 Aircraft grade aluminum CNC machined components
• High strength alloy CNC machined lower bar pin
• FK rod end bearings for extended longevity and minimal deflection
• 100% Bolt-on system - no drilling, cutting, or welding necessary for install
• Can use OEM wheels and tires
• Recommended aftermarket wheels: 8.5" wide wheel with 5" backspace
• Recommended aftermarket tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required)
• Note: shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
• air bags recommended with performance rear springs if vehicle used for towing
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Vehicle Dynamics 2.5 Inch Stage 3 Suspension System - K213003

• Fitment: Direct Fit
• 4WD applications only
• Increased wheel travel and ride quality over stock with no change in towing capacity
• Vehicle specific tuned front and rear shocks for superior shock damping and control
• Adjustable coilovers from .75-2.5" of lift height
• 6061 Aircraft grade aluminum CNC machined components
• FK rod end bearings for extended longevity and minimal deflection
• 100% Bolt-on system - no drilling, cutting, or welding necessary for install
• Can use OEM wheels and tires
• Recommended aftermarket wheels: 8.5" wide wheel with 5" backspace
• Recommended aftermarket tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required)
• Note: shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
• air bags recommended with performance rear springs if vehicle used for towing
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Vehicle Dynamics 2.5 Inch Stage 4 Suspension System - K213004

• Fitment: Direct Fit
• 4WD applications only
• Increased wheel travel and ride quality over stock with no change in towing capacity
• Vehicle specific tuned front and rear shocks for superior shock damping and control
• Adjustable coilovers from .75-2.5" of lift height
• 6061 Aircraft grade aluminum CNC machined components
• Corrosion resistant CAD plated coilover shock body with 7/8 shaft
• High strength alloy CNC machined lower bar pin
• FK rod end bearings for extended longevity and minimal deflection
• 100% Bolt-on system - no drilling, cutting, or welding necessary for install
• Can use OEM wheels and tires
• Recommended aftermarket wheels: 8.5" wide wheel with 5" backspace
• Recommended aftermarket tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required)
• Note: shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
• air bags recommended with performance rear springs if vehicle used for towing
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon .75 - 2.5 Inch Stage 1 Suspension System - K213101

• Fitment: Direct Fit
• Adjustable coilovers from .75 - 2.5 inch lift height allow for fitment of larger and more aggressive tires
• ICON shocks features vehicle specific tune for superior performance and ride quality
• Fits 2 & 4WD applications
• 6061 aircraft grade aluminum CNC machined components
• Shocks are fully rebuildable and revalvable
• 100% bolt-on system, no drilling, cutting or welding necessary for install
• Can use OEM wheels and tires
• Recommended aftermarket wheels: 18x with 5 inches backspace / 0mm offset
• Recommended aftermarket tires: 33 x 11.5 (Larger tires may fit but fender trimming and modifications will be required)
• Notes: Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
• Air bags recommended with performance rear springs if vehicle used for towing
• Springs not rated for eco diesel equipped trucks
• Not for vehicles with rear factory air ride
• Ships in multiple boxes
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Vehicle Dynamics .75-2.5" Stage 2 Suspension System - K213102

• Fitment: Direct Fit
• Adjustable coilovers from .75-2.5" of lift height allow for fitment of larger and more aggressive tires
• ICON shocks feature vehicle specific tune for superior performance and ride quality
• 1.5" lift, dual rate rear coil springs offer incredible ride quality and increased suspension performance
• Fits 2WD & 4WD applications
• 6061 Aircraft grade aluminum CNC machined components
• Shocks are fully rebuildable and revalvable
• 100% Bolt-on system - no drilling, cutting, or welding necessary for install
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Vehicle Dynamics .75-2.5" Stage 5 Suspension System with Tubular Upper Control Arms - K213105T

• Fitment: Direct Fit
• Adjustable coilovers from .75-2.5" of lift height allow for fitment of larger and more aggressive tires
• ICON 2.5 Series shocks feature vehicle specific tune for superior performance and ride quality
• Easy-to-adjust CDC Valve (Compression Damping Control) allows for end-user compression damping changes to suit all types of terrain and vehicle cargo configurations
• Corrosion resistant CAD plated shock bodies with 7/8" shafts
• FK rod end bearings for extended longevity and minimal deflection
• ICON upper control arms improve suspension geometry for predictable handling
• Patent pending Delta Joint combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball
• 1.5" lift, dual rate rear coil springs offer incredible ride quality and increased suspension performance
• Fits 2WD & 4WD applications
• 6061 Aircraft grade aluminum CNC machined components
• Shocks are fully rebuildable and revalvable
• 100% Bolt-on system - no drilling, cutting, or welding necessary for install
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Vehicle Dynamics 2-3" Stage 1 Suspension System with Tubular Upper Arms - K213111T

• Fitment: Direct Fit
• 19-Current RAM 1500
• Increased wheel travel and ride quality over stock with no change in towing capacity
• Vehicle specific tuned front and rear shocks for superior damping and vehicle control
• PTFE lined spherical bearings and application specific mounting hardware
• Adjustable coilovers from 2-3" of lift height
• 6061 Aircraft grade aluminum CNC machined components
• Corrosion resistant CAD plated coilover shock body with 7/8" shaft
• High strength alloy CNC machined lower bar pin
• FK rod end bearings for extended longevity and minimal deflection
• 2.0 aluminum body rear IFP shock with 5/8" polished shaft
• 100% Bolt-on system - no drilling, cutting, or welding necessary for install
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Vehicle Dynamics 2-3" Stage 2 Suspension System with Billet Upper Arms - K213112

• Fitment: Direct Fit
• 19-Current RAM 1500
• Increased wheel travel and ride quality over stock with no change in towing capacity
• Vehicle specific tuned front and rear shocks for superior damping and vehicle control
• PTFE lined spherical bearings and application specific mounting hardware
• Adjustable coilovers from 2-3" of lift height
• 6061 Aircraft grade aluminum CNC machined components
• Corrosion resistant CAD plated coilover shock body with 7/8" shaft
• High strength alloy CNC machined lower bar pin
• FK rod end bearings for extended longevity and minimal deflection
• 2.0 aluminum body rear IFP shock with 5/8" polished shaft
• 100% Bolt-on system - no drilling, cutting, or welding necessary for install
• Billet aluminum UCA for added strength, durability, and featuring on vehicle adjustability for easy alignment and improved caster
• Includes dual rate rear coil springs
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Vehicle Dynamics 2-3" Stage 2 Suspension System with Tubular Upper Arms - K213112T

• Fitment: Direct Fit
• 19-Current RAM 1500
• Increased wheel travel and ride quality over stock with no change in towing capacity
• Vehicle specific tuned front and rear shocks for superior damping and vehicle control
• PTFE lined spherical bearings and application specific mounting hardware
• Adjustable coilovers from 2-3" of lift height
• 6061 Aircraft grade aluminum CNC machined components
• Corrosion resistant CAD plated coilover shock body with 7/8" shaft
• High strength alloy CNC machined lower bar pin
• FK rod end bearings for extended longevity and minimal deflection
• 2.0 aluminum body rear IFP shock with 5/8" polished shaft
• 100% Bolt-on system - no drilling, cutting, or welding necessary for install
• Includes rear dual rate coil springs
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Suspension 3 Inch Stage 1 Lift Kit with 2.0 Aluminum Series Shocks - K22001

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Dual rate coil springs
• Front and rear billet bump stops
• Front sway bar links
• 2.0 Aluminum Series shocks included
• Made in the USA
• Max Tire Size: 33x12.50
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Suspension 2.5" Stage 1 Suspension System - K22011

• Fitment: Direct Fit
• Wrangler JL, 2 & 4 Door
• 2.5" lift height
• Fits 35" tires (37" with bump stop spacer kit)
• 3" front, 2" rear increase in wheel travel
• Improves on and off-road ride quality over stock
• Dual rate coil springs with lifetime guarantee against sagging/breakage
• 2.0 Aluminum Series shocks with vehicle specific valving
• 100% bolt-on system makes for an easy install
• ICON 1K tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• California Residents: WARNING
+ View More Specs - View Less Specs

Icon Suspension 2.5" Stage 2 Suspension System with Lower Link Kit - K22012