Currie Ball Joints

From $181.99

Currie Control Arm Brackets

From $55.00

• Laser cut 3/16in. steel
• Radiused to fit a 3in tube
• Weld-on
• Sold as a pair
• California Residents: WARNING

Currie Enterprises Currie 44 Front Crate Axle Assemblies

From $5,600.00

• Currie 44 high-pinion nodular iron center section with thicker walls and webbing to deliver superior strength and rigidity
• Large 3-inch diameter .375 wall axle tubes (left) are more than twice as strong as the stock 2.5-inch diameter .250 wall tubes
• Currie heavy duty forged inner knuckles (right) are significantly stronger that the stock knuckles (left) and are designed for serious off-road use with up to 37” tall tires
• Currie Performance 4340 Chromoly axles provide superior strength over OEM carbon steel axles
• Upper control arm mounts feature rebuildable Johnny Joints® for improved suspension articulation
• Lower control arm mounts are one piece construction with integrated skid plates to help fend off bracket seeking rocks
• 1350 pinion yoke provides increased strength over the stock companion flange
• Currie nodular-iron differential cover to defend against those unfortunate rock encounters
• California Residents: WARNING

Currie Enterprises Currie 60 Rear Crate Axle Assemblies

From $5,300.00

• Currie 60 high-pinion, radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Highest measured ground clearance of any 60 on the market (and that’s including the integrated skid plate), guess the other guys can’t read a tape measure
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Large diameter pinion bearings to handle the increased load of reverse geometry gears
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminating oil starvation issues
• Large 3-inch diameter .375 thick axle tubes deliver superior strength without sacrificing ground clearance or being overweight
• Currie Performance 40-spline 4340 chrome moly semi-floating axles, the largest and strongest standard axle in the industry
• Massive Set 80 axle bearings allow for larger axle diameter through the bearing for increased strength
• California Residents: WARNING

Currie Enterprises Currie 60 Front Crate Axle Assemblies

From $7,500.00

• Currie 60 high-pinion radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Large diameter outer pinion bearing (right) is designed for the demands of reverse rotation/high pinion housings. Stock low pinion bearing (left)
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminate oil starvation issues
• Large 3” diameter .375” thick wall axle tubes (left) are more than twice as strong as the stock Dana® 44 (right)
• Upper control arm mounts feature rebuildable Johnny Joints® for improved suspension articulation
• Big 13.250 inch diameter vented rotors (+1.3 inches larger than stock) provide the increased brake torque required for stopping large tires
• Lower control arm mounts are one piece construction with integrated skid plates to help fend off bracket seeking rocks
• California Residents: WARNING

Currie Enterprises Currie Extreme 60 Front Crate Axle Assemblies

From $9,850.00

• Currie Extreme 60 stage-2 high-pinion nodular iron center section is simply the strongest 60 series casting we offer, with 9 lbs. more reinforcement in critical areas over the already strong Stage-1 center section
• Radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Ring gear load bolt eliminates deflection, to dramatically increase the torque handling capacity
• Highest measured ground clearance of any 60 on the market (and that’s including the integrated skid plate), guess the other guys have trouble reading a tape measure
• Currie Performance 35-spline 4340 chrome moly inner and outer axles for superior end to end strength
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and extending bearing life
• Currie nodular iron differential cover with integrated upper control arm mount features rebuildable Johnny Joints® for superior articulation and service life
• Currie Currectlync® 1 5/8” diameter heat treated Chromoly tie rod for unsurpassed strength and reliability
• Big 13.250 rotors (+1.3 inch over stock) and large dual piston calipers provide the stopping power required for 37 inch and larger tires
• California Residents: WARNING

Currie Enterprises Currie 70 Front Crate Axle Assemblies

From $15,352.95

Currie Enterprises Currie 70 Rear Crate Axle Assemblies

From $14,000.00

RockJock 4x4 Johnny Joints

From $255.00

RockJock 4x4 Narrow Johnny Joints

From $35.99

RockJock 4x4 Antirock Sway Bar Arms

From $287.00

• Chromoly sway bar
• Forged chromoly offset sway bar arms
• Billet aluminum frame brackets

RockJock 4x4 Suspension Lift Kits

From $1,438.00

JW Speaker 3.5" LED Auxiliary Light Kit

From $312.07

• 3.5 inches x 3.5 inches
• Available in Spot, Trapezoid or Flood beam patterns
• BIG light output, small form factor
• Built to withstand the rigors of off-roading
• Cutting-edge optical design delivers superior light output
• Perfect for rig setups where space constraints are a concern
• All kits come with a 2-light relay kit switch
• Raw Output: 2,450 Lumens
• Effective Output: 1,350 Lumens
• Operating Voltage: 9-16V DC
• Wiring: 52 bare wires
• Standards: Sealed to IP69K
• California Residents: WARNING

JW Speaker LED Work Lights

From $111.75

• Brightest and toughest LED construction work lights
• DC input voltage for use on a wide range of vehicles
• Lightweight single-piece aluminum housing
• California Residents: WARNING

JW Speaker 8700 Evolution J2 Series LED Headlight and Turn Signal Kits

From $1,062.99

• 07-Current Wrangler JK, 2 & 4 Door
• 8700 series Evolution J2 series LED headlights
• Available with Black or Carbon Fiber bezels
• Model 239 J2 Series 3.5" Round Turn Signals
• Available in Amber, Smoke or Clear
• 12V DC input
• Dual burn high and low beam optics for extra punch of light
• DOT-compliant for on-road use
• No anti-flicker harness required
• Easy plug & play installation
• Headlights are not compatible with 2017 Jeep Wrangler JK models equipped with factory LED headlights
• Turn signals have Amber lenses
• Designed exclusively for Jeeps
• Retrofits all stock Jeep JK bumpers
• Sold as a pair of headlights with a pair of turn signals
• California Residents: WARNING

JW Speaker A-Pillar Light Mounting Kits

From $61.99

• Black Powdercoat Steel Construction
• Utilizes Factory Hardware
• Sold in Pairs
• Jeep Light Mounts
• California Residents: WARNING

JW Speaker TS1000 Light Bar Mounting Brackets

From $89.80

• This light mount by JW Speaker is a single end mount bracket kit that is designed to be used with model TS1000 LED light bars
• This allows the mounting of the light bar in many different locations for optimal off-road lighting
• All hardware is included making for easy installation
• California Residents: WARNING

JW Speaker Daytime Running Lights

From $224.99

JW Speaker 8632 Series LED Headlights

From $1,162.03

• 5.75" Round Headlights with Turn Signal & Pedestal
• DOT- and ECE-compliant functions make this product 100% street legal
• Lamps are sold as kits, comprising one right hand and left hand one unit
• Plug and play installation ensures easy installation
• Side marker illuminates along the side of the lamp, flashing with the turn signal
• Turn signal, daytime running light (DRL) & front position (FP) functions utilize a outer ring at high intensities
• Produces identical light output to our Model 8630 Evolution LED headlight and Model 8631 Evolution LED headlight
• California Residents: WARNING

JW Speaker Portable LED Hand Held Lamps

From $267.84

• Available in Camouflage or Black
• Low profile allows for mounting in spaces where other lights won’t fit
• Ergonomic handle fits gloved hand
• Compact size, designed to fit into vehicle cup holder
• Textured pattern around exterior lens prevents glare from operators eyes
• Die-cast aluminum housing and impact-resistant polycarbonate lens provide rugged durability
• Kit includes: Coiled power cord stretching up to 12 feet and plugs into your vehicle’s cigarette lighter (12-24V)
• Vehicle power adapter with battery clips
• Trailer Harness Adapter
• Powerful Magnetic Mount
• Convenient cotton carrying bag
• California Residents: WARNING

JW Speaker LED Light Bars

From $1,100.99

• Flood, High, Pencil and Wide beam pattern options
• The Model TS1000 off-road LED light bars offer a compact, lightweight light bar designed especially for off-road use and UTVs
• Weatherproof, thermally conductive plastic housings
• High-performance LED optics package providing bright, white light output for maximum visibility
• Additional accessory brackets available for easy mounting both single and double stacking lights
• California Residents: WARNING

JW Speaker Model 8900 Evolution 2 LED Headlights

From $302.99

• 5x7"
• Chrome or black inner bezel
• 12-24V DOT/ECE LED
• Anti-fog and hard-coated PC lens to prevent cracking and formulated to resist UV or chemical damage
• Sold individually
• Meets proposed National Highway Transportation Safety Administration (NHTSA) guidelines for a 5-Star NCAP-compliant low beam headlight
• Improved LED technology delivering more light output and less glare
• Anti-fog and hard-coated PC lens to prevent cracking and formulated to resist UV or chemical damage
• Superior condensation management
• Street legal supporting DOT, Transport Canada ECE and Military standards & requirements
• California Residents: WARNING

JW Speaker Model 8801 Evolution LED Headlights

From $300.99

• UV-resistant polycarbonate lens
• Die-cast aluminum housing provides maximum protection

JW Speaker Evolution Series Headlights

From $314.98

• 5.75" Round Headlights
• Combined high and low beam functions
• Newer design boasts a 50% increase in high beam intensity
• Easy plug and play installation with Delphi wire connector
• Front position and DRL functions utilize a new outer ring at high intensities
• ECE versions (not for use in the U.S.) feature DRL & FP functions
• California Residents: WARNING