KC HiLites Tube Clamp Light Mounting Brackets

From $32.49

RockJock 4x4 Suspension Lift Kits

From $1,438.00

RockJock 4x4 Narrow Johnny Joints

From $35.99

RockJock 4x4 Johnny Joints

From $255.00

RockJock 4x4 Antirock Sway Bar Arms

From $287.00

• Chromoly sway bar
• Forged chromoly offset sway bar arms
• Billet aluminum frame brackets

Currie Pinion Seals

From $52.53

Currie Ball Joints

From $181.99

Currie Control Arm Brackets

From $55.00

• Laser cut 3/16in. steel
• Radiused to fit a 3in tube
• Weld-on
• Sold as a pair
• California Residents: WARNING

Currie Enterprises Currie 44 Front Crate Axle Assemblies

From $5,600.00

• Currie 44 high-pinion nodular iron center section with thicker walls and webbing to deliver superior strength and rigidity
• Large 3-inch diameter .375 wall axle tubes (left) are more than twice as strong as the stock 2.5-inch diameter .250 wall tubes
• Currie heavy duty forged inner knuckles (right) are significantly stronger that the stock knuckles (left) and are designed for serious off-road use with up to 37” tall tires
• Currie Performance 4340 Chromoly axles provide superior strength over OEM carbon steel axles
• Upper control arm mounts feature rebuildable Johnny Joints® for improved suspension articulation
• Lower control arm mounts are one piece construction with integrated skid plates to help fend off bracket seeking rocks
• 1350 pinion yoke provides increased strength over the stock companion flange
• Currie nodular-iron differential cover to defend against those unfortunate rock encounters
• California Residents: WARNING

Currie Enterprises Currie 60 Rear Crate Axle Assemblies

From $5,300.00

• Currie 60 high-pinion, radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Highest measured ground clearance of any 60 on the market (and that’s including the integrated skid plate), guess the other guys can’t read a tape measure
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Large diameter pinion bearings to handle the increased load of reverse geometry gears
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminating oil starvation issues
• Large 3-inch diameter .375 thick axle tubes deliver superior strength without sacrificing ground clearance or being overweight
• Currie Performance 40-spline 4340 chrome moly semi-floating axles, the largest and strongest standard axle in the industry
• Massive Set 80 axle bearings allow for larger axle diameter through the bearing for increased strength
• California Residents: WARNING

Currie Enterprises Currie 60 Front Crate Axle Assemblies

From $7,500.00

• Currie 60 high-pinion radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Large diameter outer pinion bearing (right) is designed for the demands of reverse rotation/high pinion housings. Stock low pinion bearing (left)
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminate oil starvation issues
• Large 3” diameter .375” thick wall axle tubes (left) are more than twice as strong as the stock Dana® 44 (right)
• Upper control arm mounts feature rebuildable Johnny Joints® for improved suspension articulation
• Big 13.250 inch diameter vented rotors (+1.3 inches larger than stock) provide the increased brake torque required for stopping large tires
• Lower control arm mounts are one piece construction with integrated skid plates to help fend off bracket seeking rocks
• California Residents: WARNING

Currie Enterprises Currie Extreme 60 Front Crate Axle Assemblies

From $9,850.00

• Currie Extreme 60 stage-2 high-pinion nodular iron center section is simply the strongest 60 series casting we offer, with 9 lbs. more reinforcement in critical areas over the already strong Stage-1 center section
• Radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Ring gear load bolt eliminates deflection, to dramatically increase the torque handling capacity
• Highest measured ground clearance of any 60 on the market (and that’s including the integrated skid plate), guess the other guys have trouble reading a tape measure
• Currie Performance 35-spline 4340 chrome moly inner and outer axles for superior end to end strength
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and extending bearing life
• Currie nodular iron differential cover with integrated upper control arm mount features rebuildable Johnny Joints® for superior articulation and service life
• Currie Currectlync® 1 5/8” diameter heat treated Chromoly tie rod for unsurpassed strength and reliability
• Big 13.250 rotors (+1.3 inch over stock) and large dual piston calipers provide the stopping power required for 37 inch and larger tires
• California Residents: WARNING

Currie Enterprises Currie 70 Front Crate Axle Assemblies

From $15,352.95

Currie Enterprises Currie 70 Rear Crate Axle Assemblies

From $14,000.00

KC HiLites LED Light Bars

From $259.99

• Available in: Gravity Pro6, Flex Array and C-Series
• Pro6 is engineered to take lighting visibility to new heights while being configurable and modular
• Flex array features a 5-core to 25-core aluminum design and a patented power system for linking and stacking
• C-Series LED Light Bars feature bright and efficient CREE LEDs with combo 12° Spot and 30° Spread reflectors
• Available in 6-50" widths

KC HiLites FLEX ERA 4 Lights

From $349.99

• Independent amber LED backlight
• Signature KC FLEX aesthetic
• Machined accent bezel
• Replaceable lens and optics
• Thermal LED protection
• IP68 rated

KC HiLites FLEX ERA 4 Lights with Mounting Bracket Kits

From $709.99

• Independent Amber LED backlight
• Signature KC FLEX aesthetic
• Machined accent bezel
• Replaceable lens and optics
• Thermal LED protection
• IP68 rated

KC HiLites M-Rack Peformance Roof Racks

From $1,119.99

• Precise vehicle specific low profile contoured design
• Typically only adds 2.75" to peak vehicle height
• Integrated mounting design for front, side and rear lighting
• Optional KC 9814 provides 4 x KC C-Series area lights for added peripheral light illumination (sold separately)
• Lightweight all-aluminum construction
• Engineered to support full OEM rated load capacity
• Horizontal cross bars with hardware tracks offer endless accessory mounting options
• Designed, Engineered and Made in the USA
• California Residents: WARNING