MBRP Universal Exhaust Adapters

From $37.19

• These convenient adapters we designed to allow you to fabricate your own exhaust system with out the need for a professional tube machine. These adapters allow you to connect two different size tubes with ease.
• California Residents: WARNING

MBRP Garage Parts Band Clamp

From $24.99

• These covenient Pipes and Adapters we designed to allow you to fabricate your own custom exhaust system with out the need for a professional tube machine. These parts will allow you to achieve professional results with out they professional price.
• California Residents: WARNING

MBRP Garage Parts Flex Pipe

From $53.12

• These covenient Pipes and Adapters we designed to allow you to fabricate your own custom exhaust system with out the need for a professional tube machine. These parts will allow you to achieve professional results with out they professional price.
• California Residents: WARNING

MBRP Garage Parts Pro Series Muffler

From $278.99

• These Mufflers are designed to provide you maximum performance with minimum sound.
• California Residents: WARNING

MBRP Garage Parts XP Series Muffler

From $129.99

• These Mufflers are designed to provide you maximum performance with minimum sound.
• California Residents: WARNING

MBRP SLM Series Exhaust System

From $313.49

• MBRP manufactures all their Single and Dual Exhaust Systems to the highest quality standards to give you a system that not only provides you power and mileage increases but one that can stand up to the demands of the extreme off roader with out falling apart. These systems feature 100% mandrel bent tubing and the lowest degree of bends.
• California Residents: WARNING

MBRP Smokers XP Series Exhaust System

From $655.64

• MBRP manufactures all their Single and Dual Exhaust Systems to the highest quality standards to give you a system that not only provides you power and mileage increases but one that can stand up to the demands of the extreme off roader with out falling apart. These systems feature 100% mandrel bent tubing and the lowest degree of bends.
• California Residents: WARNING

Currie Differential Housing/Axle Package

From $1,507.28

• Differential Housing and Axle Package
• Incl. HD Housing
• 31 Spline Axle Shafts
• Leaf Spring Pads Installed
• Shock Mounts Loose
• Direct replacement
• California Residents: WARNING

MBRP Installer Series Cat Back Single Side Exit Exhaust System

From $292.94

• MBRP manufactures all their Single and Dual Exhaust Systems to the highest quality standards to give you a system that not only provides you power and mileage increases but one that can stand up to the demands of the extreme off roader with out falling apart. These systems feature 100% mandrel bent tubing and the lowest degree of bends.
• California Residents: WARNING

MBRP Pro Series Cool Duals Filter Back Exhaust System

From $530.09

• MBRP manufactures all their Single and Dual Exhaust Systems to the highest quality standards to give you a system that not only provides you power and mileage increases but one that can stand up to the demands of the extreme off roader with out falling apart. These systems feature 100% mandrel bent tubing and the lowest degree of bends.
• California Residents: WARNING

MBRP Smokers XP Series Cat Back/DPF Stack Exhaust System

From $571.94

• MBRP manufactures all their Single and Dual Exhaust Systems to the highest quality standards to give you a system that not only provides you power and mileage increases but one that can stand up to the demands of the extreme off roader with out falling apart. These systems feature 100% mandrel bent tubing and the lowest degree of bends.
• California Residents: WARNING

RockJock 4x4 Currectlync Steering System

From $191.00

• 1-5/8in. diameter 4130 chrome moly
• Heat treated steel tubing tie rod and drag link tubes
• 1-1/4in. thread forged steel greasable tie rod ends
• New steering stabilizer shock bracket and u-bolt kit
• California Residents: WARNING

RockJock 4x4 Antirock Sway Bar Kits

From $535.00

• Complete kit
• Includes Sway Bar, End Links, Bushings, Arms
• All Hardware and Mounting Brackets
• California Residents: WARNING

RockJock 4x4 Steering Stabilizer Mounting Components

From $51.00

• Designed to be used with RockJocks Currectlync tie rod
• Bracket plate
• Lock washers and nuts
• California Residents: WARNING

RockJock 4x4 Sway Bar End Links

From $33.00

Currie Pinion Seals

From $52.53

Currie Ball Joints

From $181.99

Currie Control Arm Brackets

From $55.00

• Laser cut 3/16in. steel
• Radiused to fit a 3in tube
• Weld-on
• Sold as a pair
• California Residents: WARNING

Currie Enterprises Currie 44 Front Crate Axle Assemblies

From $5,600.00

• Currie 44 high-pinion nodular iron center section with thicker walls and webbing to deliver superior strength and rigidity
• Large 3-inch diameter .375 wall axle tubes (left) are more than twice as strong as the stock 2.5-inch diameter .250 wall tubes
• Currie heavy duty forged inner knuckles (right) are significantly stronger that the stock knuckles (left) and are designed for serious off-road use with up to 37” tall tires
• Currie Performance 4340 Chromoly axles provide superior strength over OEM carbon steel axles
• Upper control arm mounts feature rebuildable Johnny Joints® for improved suspension articulation
• Lower control arm mounts are one piece construction with integrated skid plates to help fend off bracket seeking rocks
• 1350 pinion yoke provides increased strength over the stock companion flange
• Currie nodular-iron differential cover to defend against those unfortunate rock encounters
• California Residents: WARNING

Currie Enterprises Currie 60 Rear Crate Axle Assemblies

From $5,300.00

• Currie 60 high-pinion, radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Highest measured ground clearance of any 60 on the market (and that’s including the integrated skid plate), guess the other guys can’t read a tape measure
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Large diameter pinion bearings to handle the increased load of reverse geometry gears
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminating oil starvation issues
• Large 3-inch diameter .375 thick axle tubes deliver superior strength without sacrificing ground clearance or being overweight
• Currie Performance 40-spline 4340 chrome moly semi-floating axles, the largest and strongest standard axle in the industry
• Massive Set 80 axle bearings allow for larger axle diameter through the bearing for increased strength
• California Residents: WARNING

Currie Enterprises Currie 60 Front Crate Axle Assemblies

From $7,500.00

• Currie 60 high-pinion radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Large diameter outer pinion bearing (right) is designed for the demands of reverse rotation/high pinion housings. Stock low pinion bearing (left)
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminate oil starvation issues
• Large 3” diameter .375” thick wall axle tubes (left) are more than twice as strong as the stock Dana® 44 (right)
• Upper control arm mounts feature rebuildable Johnny Joints® for improved suspension articulation
• Big 13.250 inch diameter vented rotors (+1.3 inches larger than stock) provide the increased brake torque required for stopping large tires
• Lower control arm mounts are one piece construction with integrated skid plates to help fend off bracket seeking rocks
• California Residents: WARNING

Currie Enterprises Currie Extreme 60 Front Crate Axle Assemblies

From $9,850.00

• Currie Extreme 60 stage-2 high-pinion nodular iron center section is simply the strongest 60 series casting we offer, with 9 lbs. more reinforcement in critical areas over the already strong Stage-1 center section
• Radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Ring gear load bolt eliminates deflection, to dramatically increase the torque handling capacity
• Highest measured ground clearance of any 60 on the market (and that’s including the integrated skid plate), guess the other guys have trouble reading a tape measure
• Currie Performance 35-spline 4340 chrome moly inner and outer axles for superior end to end strength
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and extending bearing life
• Currie nodular iron differential cover with integrated upper control arm mount features rebuildable Johnny Joints® for superior articulation and service life
• Currie Currectlync® 1 5/8” diameter heat treated Chromoly tie rod for unsurpassed strength and reliability
• Big 13.250 rotors (+1.3 inch over stock) and large dual piston calipers provide the stopping power required for 37 inch and larger tires
• California Residents: WARNING

Currie Enterprises Currie 70 Front Crate Axle Assemblies

From $15,352.95

Currie Enterprises Currie 70 Rear Crate Axle Assemblies

From $14,000.00