RockJock Currectlync Heavy-Duty Tie Rod System - CE-9701

• Fitment: Direct Fit
• TJ Wrangler - All Models (with stock outer steering knuckles)
• TJ Wrangler Unlimited (LJ) - All Models (with stock outer steering knuckles)
• XJ Cherokee - All Models (with stock outer steering knuckles)
• MJ Comanche - All Models (with stock outer steering knuckles)
• ZJ Grand Cherokee - All Models (with stock outer steering knuckles)
• (1) Tie Rod Assembly
• (1) Drag Link Assembly
• (1) Steering Stabilizer Shock Bracket Kit
• Intended for use with 0–4 in. of lift out of the box
• Can be used with up to 5 in.–6 in. of lift, but requires the use of a 2 in. dropped pitman arm for any lift amount over 4 in
• Vehicles must be equipped with a 2 in. bump stop extension over stock – regardless of lift amount
• For use on factory Dana 30 and Dana 44 differentials – or aftermarket axles that retain the factory outer steering knuckles
• All 4 rod end tapers are designed to fit the vehicles stock, original taper for ease of installation. If your tapers have been enlarged or drilled out – this will no longer be a bolt-on kit
• Tie Rod = 1 1/4 in. dia. solid alloy steel
• Tie Rod Ends = 22mm x 1.5 RH/LH threads, forged steel
• Drag Link = 1 1/4 in. dia. forged steel
• Drag Link Ends = 1 1/8 in.-16 RH/LH threads, forged steel
• Steering Stabilizer Shock Bracket Plate = 1/4 in. laser cut steel
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Antirock Front Sway Bar Kit - CE-9900

• Fitment: Direct Fit
• 97-06 Wrangler TJ/LJ
• Front sway bar kit
• SAE 4130 heat treated steel
• Includes all necessary components
• Bushings and hardware included
• Step by step installation instructions
• CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock setup
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Currectlync Heavy-Duty Steering System with Flipped Drag Link - JK-9704P

• Fitment: Direct Fit
• 42mm (1.65") diameter alloy steel tie rod tube with indexed ends for superior strength
• 1.3" diameter solid forged steel “flipped configuration” drag link
• Heavy duty greaseable rod ends for increased strength and long service life
• Double toe adjuster simplifies alignment (eliminates the need to remove stabilizer or ram to adjust)
• Includes stabilizer shock relocation bracket kit
• Compatible with ram assist steering
• Designed for stock height or up to 6" lifted vehicles
• Works with any size tire
• 2-year warranty
• When using with ram assist, be mindful of tube size when purchasing ram bracket
• California Residents: WARNING
+ View More Specs - View Less Specs

Painless Wiring 1976 to 1986 CJ Wiring Harness - 10150

• Fitment: Direct Fit
• California Residents: WARNING

RockJock Currectlync Heavy-Duty Tie Rod - Complete - CE-9701TR

• Fitment: Direct Fit
• 1-1/4 inch diameter solid alloy steel
• 7/8 inch thread tie rod ends
• 200% stronger than stock
• California Residents: WARNING

RockJock Antirock Front Sway Bar System - CE-9900JKF

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Steel arms
• Aluminum frame mount bracket
• Front sway bar
• Increases traction and balance
• SAE 4130 heat treated steel
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Currectlync Tie Rod Kit - JK-9704TR

• Fitment: Direct Fit
• Tie Rod Kit
• California Residents: WARNING

RockJock Front Shackles - CE-9040

• Fitment: Direct Fit
• 1/4 inch thick steel side plates
• Grade 8 1/2 inch greasable bolts
• Urethane Bushings
• California Residents: WARNING

RockJock Currectlync Heavy-Duty Drag Link - CE-9701DLO

• Fitment: Direct Fit
• Link only, no rod ends
• Replacement unit
• California Residents: WARNING

RockJock Currectlync Drag Link End - CE-9701DLR

• Fitment: Direct Fit
• For RockJocks Currectlync tie rod
• Left hand thread
• 1-1/8 inch thread for added strength
• Includes grease fitting
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Currectlync HD Steering Tie Rod End - CE-9701TRL

• Fitment: Direct Fit
• Left hand thread tie rod end
• Fits RockJock's CE-9701 Currectlync heavy-duty steering system
• Designed with 22mm x 1.5 pitch LH threads
• Features a zerk fitting for greasing for increased performance and long life
• Includes boot, castle nut, and cotter pin
• Fits on the passenger side of the vehicle
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Rear Sway Bar Extended Links - CE-9142

• Fitment: Direct Fit
• For vehicles with up to 4-1/2 inch of lift
• 4 inch longer than factory
• Sold As A Pair
• California Residents: WARNING

RockJock Currectlync Oversized Steering Stabilizer Bracket - CE-9701SB

• Fitment: Direct Fit
• 97-06 Wrangler TJ/LJ
• 84-01 Cherokee XJ
• 86-92 Comanche MJ
• Fits RockJock Currectlync heavy dutytie rod system but also fits 1-1/4 inch tie rod
• Includes the bracket plate, the two 3/8 inch-24 thread u-bolts, lock washers and nuts
• Sold as a kit
• California Residents: WARNING
+ View More Specs - View Less Specs

Currie 44 Iron Differential Cover - 44-1005CTB

• Fitment: Universal Fit
• Dana 44 axles
• Textured black
• Currie badge is laser cut stainless steel
• Gasketed fill plug with dipstick
• Socket head allen hardware
• Cover gasket included
• California Residents: WARNING
+ View More Specs - View Less Specs

Currie 44 Iron Differential Cover (Red) - 44-1005CTR

• Fitment: Universal Fit
• Dana 44 axles
• Textured red
• Currie badge is laser cut stainless steel
• Gasketed fill plug with dipstick
• Socket head allen hardware and cover gasket included
• Fits all Currie 44 and stock Dana 44 high and low pinion housings
• California Residents: WARNING
+ View More Specs - View Less Specs

Currie 60/70 Iron Differential Cover (Textured Black) - 60-1005CTB