Currie Control Arm Brackets

From $55.00

• Laser cut 3/16in. steel
• Radiused to fit a 3in tube
• Weld-on
• Sold as a pair
• California Residents: WARNING

Currie Enterprises Currie 44 Front Crate Axle Assemblies

From $5,850.00

• Currie 44 high-pinion nodular iron center section with thicker walls and webbing to deliver superior strength and rigidity
• Large 3-inch diameter .375 wall axle tubes (left) are more than twice as strong as the stock 2.5-inch diameter .250 wall tubes
• Currie heavy duty forged inner knuckles (right) are significantly stronger that the stock knuckles (left) and are designed for serious off-road use with up to 37” tall tires
• Currie Performance 4340 Chromoly axles provide superior strength over OEM carbon steel axles
• Upper control arm mounts feature rebuildable Johnny Joints® for improved suspension articulation
• Lower control arm mounts are one piece construction with integrated skid plates to help fend off bracket seeking rocks
• 1350 pinion yoke provides increased strength over the stock companion flange
• Currie nodular-iron differential cover to defend against those unfortunate rock encounters
• California Residents: WARNING

Currie Enterprises Currie 60 Rear Crate Axle Assemblies

From $5,550.00

• Currie 60 high-pinion, radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Highest measured ground clearance of any 60 on the market (and that’s including the integrated skid plate), guess the other guys can’t read a tape measure
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Large diameter pinion bearings to handle the increased load of reverse geometry gears
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminating oil starvation issues
• Large 3-inch diameter .375 thick axle tubes deliver superior strength without sacrificing ground clearance or being overweight
• Currie Performance 40-spline 4340 chrome moly semi-floating axles, the largest and strongest standard axle in the industry
• Massive Set 80 axle bearings allow for larger axle diameter through the bearing for increased strength
• California Residents: WARNING

Currie Enterprises Currie 60 Front Crate Axle Assemblies

From $7,750.00

• Currie 60 high-pinion radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Large diameter outer pinion bearing (right) is designed for the demands of reverse rotation/high pinion housings. Stock low pinion bearing (left)
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and eliminate oil starvation issues
• Large 3” diameter .375” thick wall axle tubes (left) are more than twice as strong as the stock Dana® 44 (right)
• Upper control arm mounts feature rebuildable Johnny Joints® for improved suspension articulation
• Big 13.250 inch diameter vented rotors (+1.3 inches larger than stock) provide the increased brake torque required for stopping large tires
• Lower control arm mounts are one piece construction with integrated skid plates to help fend off bracket seeking rocks
• California Residents: WARNING

Currie Enterprises Currie Extreme 60 Front Crate Axle Assemblies

From $10,100.00

• Currie Extreme 60 stage-2 high-pinion nodular iron center section is simply the strongest 60 series casting we offer, with 9 lbs. more reinforcement in critical areas over the already strong Stage-1 center section
• Radius bottom center section greatly improves obstacle slide-over by presenting a smooth curve rather than the sharp edge found on other 60 housings
• Integrated AR400 hardened steel skid plate resists deformation and gouging to slide over obstacles far better than iron housings or mild steel plates
• Ring gear load bolt eliminates deflection, to dramatically increase the torque handling capacity
• Highest measured ground clearance of any 60 on the market (and that’s including the integrated skid plate), guess the other guys have trouble reading a tape measure
• Currie Performance 35-spline 4340 chrome moly inner and outer axles for superior end to end strength
• High volume flow-thru recirculating oil system keeps pinion bearings bathed in cool oil, reducing operating temperatures and extending bearing life
• Currie nodular iron differential cover with integrated upper control arm mount features rebuildable Johnny Joints® for superior articulation and service life
• Currie Currectlync® 1 5/8” diameter heat treated Chromoly tie rod for unsurpassed strength and reliability
• Big 13.250 rotors (+1.3 inch over stock) and large dual piston calipers provide the stopping power required for 37 inch and larger tires
• California Residents: WARNING

Currie Enterprises Currie 70 Front Crate Axle Assemblies

From $15,647.06

Currie Enterprises Currie 70 Rear Crate Axle Assemblies

From $14,294.12

Rough Country Stainless Steel Brake Lines

From $39.95

• Stainless steel braided brake lines
• Hardware

Rough Country Lowering Kits

From $249.95

• Front lowering spacers
• Front cam plates
• Grade 9 hardware
• Rear spring hanger brackets
• Axle saddles
• U-bolt plates
• U-bolts
• Hardware
• (2) Premium N3 series rear shocks
• Easy bolt-on installation
• Drops the front 2-inches and the rear 4-inches for a level drop
• Rear drop is adjustable between 4in and 4.5in
• Maintains factory ride quality
• Can be returned to stock height
• Includes Grade 9 hardware and hardened washer

Rough Country Windshield Light Bar Kits

From $199.95

• Durable powder coated steel
• Handy, forward-facing illumination
• Contains High Intensity CREE LEDs
• Black panel design
• IP67 Waterproof rating

Rough Country License Plate Light Kits

From $79.95

• Easy bolt-on installation
• Aligns/Mounts to standard-sized license plate holes
• Provides additional lighting source for trail riding or for working in front of your vehicle

Rough Country Chrome Series Cree LED Light Bars

From $119.95

Rough Country LED Fog Light Kits

From $109.95

• Easy bolt-on installation
• Installs in factory fog light location
• IP67 Waterproof rating
• Durable die cast aluminum housing
• Moisture Breather technology reduces moisture build-up behind the lens
• Includes premium, flat-wound wiring harness with on/off switch
• Lights feature a 3-year Warranty
• Mounting brackets feature a Lifetime Replacement Warranty

Rough Country Cold Air Intake Systems

From $14.95

• Increases horsepower and performance
• Improves airflow to engine for better combustion
• Includes reusable air filter
• Easy to install
• High quality contruction

Rough Country Stinger Bar

From $119.95

• Durable finish
• Built from 120 wall, 2" thick steel
• Aggressive appearance
• ONLY fits Rough Country front bumper kits
• Easy bolt-on installation

Rough Country Steel Tube Doors

From $349.95

Rough Country Crossmember Kicker Braces

From $109.95

• Easy bolt-on installation
• Increases off-road stability
• Adds rigidity to the front crossmember assembly

Rough Country Drive Shafts

From $399.95

• Includes brute force red seals
• Includes better quality CV joints
• Shaft strength is twice as strong as the factory equipped driveshaft
• Grease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and not all over the bottom of your Jeep

Rough Country Master Install Kits

From $119.95

Rough Country Radius Arms

From $449.95

• 100% bolt-on installation
• Equipped with durable Clevite Rubber Bushings for maximum vibration absorption
• Help maintain factory angles when used with 4-6in lift kits
• Includes adjustable alignment cam at the axle to allow caster adjustment
• Sold as a pair

Rough Country Camera Relocation Brackets

From $69.95