Rolling into Wheel & Tire Month! Shop Now

D-ring Mount Included Direct Fit Stubby D-ring Mount Included

REFINE BY:

Brand

Smittybilt (2)
Poison Spyder Customs (5)
Addictive Desert Designs (2)
ARB 4x4 Accessories (2)
Artec Industries (1)
Bestop (2)
Body Armor 4x4 (1)
Fishbone Offroad (3)
Go Rhino (3)
Mountain Off Road Enterprises (1)
View More
Rock Slide Engineering (3)
Rugged Ridge (14)
Warn (5)
Westin (2)

Finish

Bare (3)
Black (3)
Powder Coat (33)
Satin Black (3)
Textured Black (6)

Light Mounts Included

Light Mounts Included (32)
Light Mounts Not Included (16)

Material

Aluminum (1)
Steel (47)

Part Type

Bumper (35)
Front Bumpers (9)
TJ Wrangler Body Parts (2)

Price Range

$200 to $299 (2)
$300 to $399 (5)
$400 to $499 (5)
$500 to $749 (17)
$750 to $999 (16)
Over $1000 (3)

26 Product Groups

Switch to View Products

SORT BY

Poison Spyder Brawler Lite Front Bumpers

From $799.99

The RockBrawler™ is fabricated from 3/16 inch steel plate, CNC laser cut and brake-formed for a precise fit.
The Stinger is made of 1.75 inch X .120 wall DOM tubing.
The two D-ring shackle mounts are CNC-machined from 1 inch plate steel.
The integrated winch mount accepts most major manufacturer's winches up to 15,000 lbs.
Another characteristic of the RockBrawler™ is its amazing tire clearance.
RockBrawler™ bumpers are shipped as BARE STEEL.
California Residents: WARNING

From $799.99

4.7 4.7 (19)

Smittybilt SRC Front Bumpers

From $299.99

Two-stage textured matte black powdercoat finish
2 tabs to mount lights
Wide opening allows for winch installation
1/4 inch thick custom mounting brackets
Welded d-ring tabs
5-year limited warranty
California Residents: WARNING

From $299.99

4.6 4.6 (114)

Poison Spyder BFH Front Bumpers

From $449.99

This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible.
It is no wider than the Jeep's frame rails
CNC laser-cut from a single piece of high strength 3/16 inch plate steel
The BFH™ bumper features an integrated winch mount and one-piece design.
At a mere 35 pounds, the BFH™ is among the lightest bumpers on the market.
Even fully outfitted with Brawler Bar and Heavy Duty Shackle Tabs, the BFH™ weighs only 43 pounds!
California Residents: WARNING

From $449.99

4.5 4.5 (46)

Smittybilt XRC GEN1 Front Bumper

From $529.99

Two stage matte black powder coat finish
Manufactured from 3/16" cold roll steel
1.75" 120 wall over rider and kickers
Raised corners for better entry and exit under the most extreme conditions
Solid mount D-Rings - Welds on the inside and out
Solid plate center section that wraps the frame horns and lower cross member
Built-in winch plate to accommodate up to 10k winch
One-piece welded design
5-year limited warranty
California Residents: WARNING

From $529.99

4.4 4.4 (62)

Body Armor 4x4 Front Bumpers

From $415.64

Front winch bumper
Textured Black powder coat finish
4.5 inch Light pockets
3/16 inch thick steel plate construction
California Residents: WARNING

From $415.64

4.6 4.6 (69)

Warn Elite Series Front Bumpers

From $831.99

Black powder coat wrinkle finish
Ends are tapered for increased approach angles
Welded eyelets to mount D-shackles
Minimal drilling and cutting required
California Residents: WARNING

From $831.99

4.3 4.3 (18)

Warn Rock Crawler Front Bumpers

From $592.99

Black powder coat
Tough and durable
Ends are tapered for increased approach angles
Welded eyelets to mount D-shackles
Pre-drilled holes to mount lights
California Residents: WARNING

From $592.99

3.9 3.9 (16)

Poison Spyder BFH II Front Bumpers

From $629.99

Lightweight, high clearance "stubby" bumper design
Made of 1.5" X .120" wall DOM tubing with 3/16" plate steel gussets
SpyderShell Armor Coat semi-gloss black finish
Recessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately)
High clearance recovery shackle tabs CNC machined from 1" thick plate steel
California Residents: WARNING

From $629.99

4.8 4.8 (5)

Rugged Ridge XHD Front Bumpers

From $449.99

Black powder coat
Steel
California Residents: WARNING

From $449.99

4.9 4.9 (14)

ARB Stubby Bars

From $739.00

FTextured black powder coat
Manufactured from 4mm laser cut and folded steel sheet
20mm 350 grade steel recovery points
76mm x 2mm ERW center frame tube
All hardware zinc plated for corrosion resistance
All exterior surfaces are CMT pulse welded
5 stage anti corrosion pre-treatment
Includes fully illustrated fitting instructions
California Residents: WARNING

From $739.00

3.5 3.5 (4)

Bestop HighRock 4x4 Narrow-Profile Front Bumpers

From $369.99

3/16 inch laser cut steel with E-coat and wrinkle finish powder coat top layer
JK bumper measures 41.5 inch wide, 11 inch deep, 8 inch high
TJ bumper measures 35.5 inch wide, 9 inch deep, 5.5 inch high
JK model has welded fairlead plate
TJ winch plate included separately with bumper.
JK model comes standard with pre-cut holes and molded plastic light cans to accommodate OEM lights
Optional tubular Grille Guards available in textured satin or matte black finish or stainless steel.
D-Ring Attachment ears extend through bumper and fully mig-welded front and back. D-Rings sold separately
Bolt-on, no-drill installation to factory mounting locations
Accessories shown are not included.
California Residents: WARNING

From $369.99

4.4 4.4 (18)

Mountain Off-Road Enterprises Rock Proof Front Bumpers

From $895.50

Bare steel or Black Powder Coat
Made from 3/16 inch thick steel
Front bumpers available with and without tube work
Bumpers are available in stubby and full width sizes
Rear bumper are available with and without provisions for tire carrier
California Residents: WARNING

From $895.50

5.0 5.0 (8)

Artec Industries Nighthawk Front Bumpers

From $230.99

Made in the USA from 1/8 inch CNC laser cut and formed steel
Internally gusseted for ultimate strength
High clearance design hugs factory frame for no loss of clearance or departure angle
3/4 inch thick high strength alloy steel frame brackets double as shackle mounts
High Clearance ends ensure you don’t get hung up on rocks
Available in bare steel to allow customizable color coordination
Contoured to perfectly fit the subtle curves of your Jeep
California Residents: WARNING

From $230.99

Westin Scope Front Bumpers

From $1,028.99

7 gauge steel
1-piece fully welded construction
Fits most medium frame 8,000-12,000 lbs
Mounting brackets mount directly to frame
Available in textured black finish
California Residents: WARNING

From $1,028.99

Wilco Offroad Replacement Front Bumpers

From $306.83

Innovative new replacement bumpers offer high-strength and reduced weight
57 pound complete standard bumper
Protects the vehicle, reduces weight
Steel slides better over rock than aluminum
California Residents: WARNING

From $306.83

Rock Slide Engineering Front Bumpers

From $659.99

Black powder coat
Made from 3/16 inch alloy steel
Winch Mount
Aggressive styling
California Residents: WARNING

From $659.99

4.4 4.4 (5)

Rugged Ridge HD Front Bumpers

From $549.99

Available in Stubby or Full Width
Engineered to mount most any aftermarket winch
Built-in jack lifting points at every corner
Massive recovery hooks, each one dual-drilled to work with both 3/4 and 7/8-inch shackles
Satin black powder coat finish
Limited 5-year warranty

From $549.99

3.7 3.7 (20)

Rugged Ridge XOR Front Bumpers

From $349.99

Built from 5mm-thick steel plate
Built-in skid plate
Integrated top-mount winch plate
Massive 1”-thick shackle mounts
Accommodates 3/4-inch shackles (not included)
Recessed fog light pockets
Works with standard OE fog lights
Does not work with Altitude or LED fog lights
Bolt-on installation
Mounting hardware included for installation
No drilling or cutting required

From $349.99

4.1 4.1 (7)

Rugged Ridge Venator Front Bumpers

From $899.99

Muscular stamped steel construction
Patented design features sculpted contours and sweeping arches
Features built-in winch plate and massive 1-inch thick recovery hooks
Octagonal pockets accept factory JL / JT fog lights
Easy bolt-on installation

From $899.99

3.6 3.6 (10)

Poison Spyder Crawler Front Bumpers

From $799.99

Compact, multi-faceted design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
Large radius bends for strength and great looks
Brawler Bar made of DOM tubing with tube gussets
SpyderShell™ Armor Coat semi-gloss black finish
Recessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately)
California Residents: WARNING

From $799.99

4.8 4.8 (5)

Addictive Desert Designs Rock Fighter Front Bumpers

From $1,231.88

Available with low profile top hoop or stinger
Hammer black powder coat finish
Satin black powder coat finish panels
Mount for 20" radius LED or 5 cube lights
California Residents: WARNING

From $1,231.88

5.0 5.0 (2)

Rugged Ridge Arcus Front Bumpers

From $599.99

High-strength 11-gauge steel shell surrounding a 1/4-inch thick steel winch plate
Capable of holding most model winches up to a 12.5k lb. rating
Accepts Hawse or roller-style fairleads
Massive 1-inch thick recovery hooks
Each hook is dual cross-drilled so they accept both 7/8 and 3/4-inch D-rings
Built-in fog light pockets
Accepts both factory Sport & Sahara fog light assemblies with no modification
High-quality satin black powder coat finish with a fine texture

From $599.99

4.0 4.0 (10)