Synergy Manufacturing Front Track Bar Relocation Bracket

From $220.00

• This bracket raises the vehicle's axle side track bar mount
• Heavy-duty
• Special bolt-on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Steering Kits

From $1,050.00

• Requires a minimum of 2 inch front bump stop spacers
• 100% bolt-on
• Powdercoat finish for maximum durability and corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing HD Metal on Metal Tie Rod End Boot

From $10.00

• Tie Rod End Boots
• Made of tear/wear resistant black NBR and come with retaining springs
• Sold Individually
• California Residents: WARNING

Dana Spicer Axle Shaft Bearings

From $21.99

• OE replacement part
• California Residents: WARNING

Dana Spicer Axle Bearing Retaining Rings

From $7.99

• Model 44 rear axle
• 2-1/4 inch outside diameter
• California Residents: WARNING

Dana Spicer Spindle Bearing Seal Kits

From $12.99

• Spindle Bearing Seal Kits
• Dana 30 and dana 44
• Includes inner spindle bearing, v-lip seal, nylon thrust washer, and stub axle seal
• California Residents: WARNING

Dana Spicer Dana 35 Open Differential Internal Kits

From $165.99

• The Dana Spicer Open Differential Internal Kits are forged to ensure greater strength and durability
• Spicer internal gear kits offer a phosphate coating on the cross shaft and a statistically controlled heat treating
• Dana Spicer open differential internal kits replace all of the internal components of your standard open differentials
• These kits will eliminate clunking caused by worn spider gears and tighten up those sloppy differentials
• California Residents: WARNING

Dana Spicer Flange Yokes

From $65.99

• Dana Spicer Flange Yokes are forged from hardened steel and heat treated to endure tough conditions
• The Dana Spicer flange yokes adapts your standard style drive shaft to a flat companion flange style
• Dana Spicer flange yokes deliver the same quality and reliability you would expect from your original equipment part.
• California Residents: WARNING

Synergy Manufacturing Dana 30/44 Inner C Gusset Kit 2.5 Inch Axle Housing

From $85.00

• CNC Bent For Precision Fit
• Laser cut for tight clearances
• Heavy Duty Three Side Construction
• Requires Welding: Fits All Jeep JK Dana 30/44 Fronts With 2.5 inch Axle Tubes
• Made in the U.S.A
• California Residents: WARNING

Dana Spicer Dana 30 Axle Shaft Assemblies

From $1,107.99

• Dana Spicer Dana 30 Axle Shaft Assemblies are ultrasonically tested for unparalleled reliability.
• Spicer parts are designed, engineered, and manufactured to meet or exceed OE requirements because they are OE parts, ensuring a perfect fit with our full line of industry-leading axles.
• Spicer Dana 30 Axle Shaft Assemblies are heat treated and cold formed rolled to ensure a much more consistent and stronger axle shaft.
• Spicer axle shafts undergo fatigue testing and ultrasonic testing, delivering a safety factor that’s high even by OE standards.
• California Residents: WARNING

Synergy Grab Handles

From $100.00

• Powder coat finish eliminates corrosion that can occur under extreme element. Includes all hardware necessary for a quick and easy installation. Compatible with both hard and soft tops3
• California Residents: WARNING

Dana Spicer Drive Shaft CV Centering Yokes

From $109.99

• Fits 1310 series u-joint
• 3.218 bolt circle diameter
• Greasable
• California Residents: WARNING

Dana Spicer Spindle Nut Kits

From $11.99

• Dana 30/44/GM 10 Bolt Spindle Nut Kit
• Includes Outer Nut Without Pin
• Locking Ring
• Inner Nut With Pin
• Services One Side Only
• California Residents: WARNING

Synergy Manufacturing Rear Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of rear axle when running a suspension lift
• 100% bolt on
• Rear track bar relocation bracket for lifts taller than 4.5 inch
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Shock Mounts

From $100.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Steering Box Brace

From $10.00

• Steering Box Brace
• Laser cut
• CNC bent
• precision welded
• 1/4" Steel
• Black powder coat finish for maximum corrosion resistance
• 100% Bolt-on installation
• No cutting or drilling required
• Make in the USA
• Note: When using an upgraded 09+ Steering Box, 8559-04 is the steering box brace needed, BUT, modifications will need to be made to the upgraded steering box mounts for proper fitment of the brace.
• California Residents: WARNING

Dana Spicer Dana 44 Axle Shaft Assemblies

From $118.99

• Dana Spicer Dana 44 Axle Shaft Assemblies are ultrasonically tested for unparalleled reliability.
• Spicer parts are designed, engineered, and manufactured to meet or exceed OE requirements because they are OE parts, ensuring a perfect fit with our full line of industry-leading axles.
• Spicer Dana 44 Axle Shaft Assemblies are heat treated and cold formed rolled to ensure a much more consistent and stronger axle shaft.
• Spicer axle shafts undergo fatigue testing and ultrasonic testing, delivering a safety factor that’s high even by OE standards.
• California Residents: WARNING

Dana Spicer Differential Carrier Bearing Kits

From $102.99

• Differential Carrier Bearing Kits
• Includes 2 Bearings and 2 Races
• High Quality O.E.M. Bearings
• California Residents: WARNING

Synergy Manufacturing Adjustable Front Lower Control Arms

From $500.00

Dana Spicer Dana 35 Axle Shaft Assemblies

From $204.99

• Dana Spicer Dana 35 Axle Shaft Assemblies are ultrasonically tested for unparalleled reliability.
• Spicer parts are designed, engineered, and manufactured to meet or exceed OE requirements because they are OE parts, ensuring a perfect fit with our full line of industry-leading axles.
• Spicer Dana 35 Axle Shaft Assemblies are heat treated and cold formed rolled to ensure a much more consistent and stronger axle shaft.
• Spicer axle shafts undergo fatigue testing and ultrasonic testing, delivering a safety factor that’s high even by OE standards.
• California Residents: WARNING

Dana Spicer Dana 44 Spindle Nut With Pin

From $15.99

• Dana 30/44/GM 10 Bolt Spindle Nut
• Inner Nut With Pin
• California Residents: WARNING

Synergy Manufacturing Jeep JK Stabilizer Relocation Kit

From $60.00

• Designed to relocate a Fox/Synergy Suspension steering stabilizer up and out of harms way on a JK
• Includes grade 8 hardware
• Manufactured from high strength 3/16 inch steel
• Powdercoated for corrosion resistance
• Factory clamp cannot be flipped, it will interfere with the diff cover
• Made in the U.S.A
• California Residents: WARNING

Dana Spicer Steering Knuckle Bearing and Seal Sets

From $63.99

• Kit Includes Lower King Pin Seal
• Lower Bearing Race
• Lower Bearing
• Bearing Cap
• Upper King Pin Seal
• Single Side
• California Residents: WARNING

Synergy Manufacturing Air Compressor Brackets

From $60.00

• Synergy Manufacturing Air Compressor Brackets easily bolt on mount to supply a spot to mount an onboard air compressor under the hood of your JK
• Works with VIAIR 100, 400, & 450 series compressors
• California Residents: WARNING