DECKED Truck Bed Storage Systems

From $1,499.99

• Built from 100% recycled high density polyethylene co-molded to a steel sub frame (most of the steel is also recycled)
• No drilling needed
• system attaches to the existing tie-downs in your truck
• Precise fit ensures no gaps between the deck and sidewalls of your truck bed
• Drawers are engineered to hold 200 lbs. each while still rolling smoothly
• Oversized cast aluminum handles
• Full bed-length drawers roll smoothly on sealed bearing wheels
• Drawers are weatherproof
• Ammo cans provide four areas of additional storage on either side of the wheel wells
• flip the lids and you have eight beverage holders or a handy place to store nuts, bolts, or screws when working on or near your truck
• Stainless steel edge guard ruler and bottle opener
• DECKED can handle UV light, moisture, and extreme heat or cold
• System can be installed easily and can be removed in about 20 minutes
• Three year limited warranty.
• California Residents: WARNING

Road Armor Stealth Series Front Bumpers

From $1,090.18

• Proudly made in Texas, USA
• Hot rolled and laser cut 3/16 inch Plate Steel
• 1/4-inch-thick internal mounting brackets and gussets
• all guard tubing is .120-wall
• 5 Stage Powdercoat Finish - Highly scratch resistant
• Lights are not included
• Combat Proven and Trusted by the United States Military, life time guarantee against breakage
• California Residents: WARNING

Road Armor Stealth Rear Bumpers

From $1,015.57

• Road Armor Stealth Jeep rear bumper is available in Satin Black or Bare Steel
• Available with and without winch mount
• Available with or without tire carrier
• This wrangler rear bumper is made to order please allow 4-6 weeks for shipment
• California Residents: WARNING

DECKED Core Trax Tie-Down Sets

From $100.00

• Set of two
• Four core locks
• Silver
• 6063 T5 aluminum
• Hardware included

DECKED Drawer Dividers

From $20.00

• Our dividers come in a set of four and are made from polypropylene. They are light gray in color to make finding your stuff easier. The dividers are 8 inch tall and fit, into four mounting positions within the DECKED drawers, allowing you to customize the drawers for your gear. Each divider has cut-outs that allow you to secure your gear with handy tie-down points. The dividers can be taken out or re-positioned with ease.
• California Residents: WARNING

Road Armor A-Pillar Light Mounts

From $239.20

• Road Armor A-Pillar Light Mounts are CNC laser cut from 3/16 inch thick plate
• Precision brake-formed and finish welded
• The contoured, gusseted design provides the strength needed to hold the massive Rigid 50 inch light bar securely in place on the highway or in rough terrain
• California Residents: WARNING

Road Armor Dakar Front Bumpers

From $3,707.97

• This Road Armor front end replacement improves approach angle
• Winch cavity designed around the Warn M8000, VR series or similar winch.
• Hot rolled and laser cut 3/16 inch Plate Steel
• 5 Stage Powdercoat Finish - Highly scratch resistant
• Proudly made Texas, USA
• Lights are not included.
• California Residents: WARNING

Road Armor Front Stubby Bumpers

From $1,015.57

• Bare steel
• Square light mount
• Winch mount
• Available with or without grille guard
• D-ring mount
• California Residents: WARNING

Road Armor Sahara Front Bumpers

From $2,410.24

• Black powder coat and bare steel
• Available with and without winch mount
• Available with multiple guards
• Square light mounts
• Winch mount
• California Residents: WARNING

Road Armor Dakar Rear Bumpers

From $3,546.75

• Road Armor Dakar Jeep rear bumper is available in Black powder coat or bare steel
• Manufactured from 3/16" hot rolled steel
• Recessed Light Mount (lights are not included)
• Those with the Tire Carrier rated for up to 38" Diameter Tire:1/4-inch-thick internal mounting brackets and gussets.: Wrangler rear bumper available with and without rear winch mount
• Made to order please allow 4-6 weeks for shipment
• Combat Proven and Trusted by the United States Military, Lifetime Guarantee against breakage.t
• California Residents: WARNING

DECKED Truck Bed Organizers

From $30.00

• Built from 100% recycled high density polyethylene co-molded to a steel sub frame (most of the steel is also recycled)
• No drilling needed
• system attaches to the existing tie-downs in your truck
• Precise fit ensures no gaps between the deck and sidewalls of your truck bed
• Drawers are engineered to hold 200 lbs. each while still rolling smoothly
• Oversized cast aluminum handles
• Full bed-length drawers roll smoothly on sealed bearing wheels
• Drawers are weatherproof
• Ammo cans provide four areas of additional storage on either side of the wheel wells
• flip the lids and you have eight beverage holders or a handy place to store nuts, bolts, or screws when working on or near your truck
• Stainless steel edge guard ruler and bottle opener
• DECKED can handle UV light, moisture, and extreme heat or cold
• System can be installed easily and can be removed in about 20 minutes
• Three year limited warranty.
• California Residents: WARNING

DECKED Truck Bed Storage Accessories

From $131.99

Road Armor Shackle

From $172.84

• Multiple finish options
• Constructed from 6061 T6 billet
• Max load rating varies
• Quick release retainer pin
• Made in the USA

Road Armor Vaquero Front Bumper

From $1,520.00

• Made in American and Texas Strong, USA
• Shedule 40 Pipe for center structure
• 11 Gauge shell with 1/4 inch Heavy Duty Mounting System
• Welded by Crafstmen inside and out
• Winch plate option available
• Accomodates Factory Fog Lights or Aftermarket LED Cubes

Road Armor Spartan Front Bumpers

From $1,032.41

• 11-gauge smooth steel
• 7-gauge smooth steel bracketry
• Louvered grill for positive airflow
• Sensor compatible
• CNC laser cut
• High clearance bumper

Road Armor Spartan Pre-Runner Guard

From $259.26

• Lightweight
• Nimble
• Constructed with 11-gauge steel
• Made in the USA

Road Armor TRECK Bed Rack System

From $1,284.88

• 5 stage - black textured powder coat finish
• Stainless steel mounting hardware
• 7-gauge thick drill-less rack base mounting brackets available for specific truck applications
• Includes double nut plate for attachment to factory bed slide rails
• Includes triple platform height positioning from 14in to 19in to 23in
• 11-gauge thick, laser cut steel, telescoping vertical and cross-rails for perfect fit

Road Armor Skid Plate

From $285.19

• Formed from 11-gauge steel
• Formed to fit the contours of your vehicle
• CNC Laser cut
• Press broke
• Bolt-on application

Road Armor iDentity Headache Rack

From $1,179.18

• 11-gauge
• CNC laser cut
• High quality stainless hardware
• Welded by craftsman:Made in the USA

Road Armor Spartan Rear Bumpers

From $1,213.99

• 11-gauge main body
• 7-gauge bracket
• Louvered recesses for reduced drag
• Sensor compatible
• Made in the USA

Road Armor Stealth Headache Racks

From $973.25

Road Armor Fairlead Mount & Brackets

From $172.84

• Fairlead mounts and brackets
• Synthetic and cable options
• Made in the USA

Road Armor Fire Pits

From $165.56

• 11 Gauge high quality steel
• CNC laser cut
• Large fire bowl allows for hours of burn time
• Made in the USA
• Lifetime structural warranty when used as intended

Road Armor Vaquero Rear Bumper

From $1,022.22

• Made in American and Texas Strong, USA
• Shedule 40 Pipe for center structure
• 11 Gauge shell with 1/4 inch Heavy Duty Mounting System
• Welded by Crafstmen inside and out
• Recessed Light Ports for Flush or Surface mount LED Cubes