Dee Zee Truck Bed Mats

From $152.99

• Dee Zee Bed Mats are a cost-effective solution to protect your truck bed surface free from scratches, dings and dents. Shifting cargo is also a detriment to your truck's appearance. Bed Mats help prevent shifting cargo from damaging your truck and eliminate chasing down loose items strewn about the truck bed. Dee Zee Bed Mats are custom fitting to your truck by contouring around wheel wells for ultimate coverage. Rubber cleats on the reverse side facilitate water drainage and keep the Bed Mat securely in place. Made in the USA with superior manufacturing, you can trust heavy-duty Dee Zee Bed Mats to last the life of your truck.
• California Residents: WARNING

Dee Zee Tailgate Assist Shocks

From $37.99

• Dee-Zee's EZ Down safely controls the drop rate for your truck's tailgate. Features include: Custom designed for your make & model, tested to handle heavy use for the life of your truck, works in conjunction with factory cables, easy no drill installation takes minutes and all necessary hardware is included.
• California Residents: WARNING

Synergy Manufacturing High Steer Drag Link

From $450.00

Synergy Manufacturing Wheel Spacers

From $110.00

• Wheel hub centric for increased strength (-H part numbers only)
• CNC machined from billet 6061-T6 aluminum
• Features corrosion resistant red anodizing
• Can be used with factory or after market wheels
• Adapters are 1.50" wide
• Includes Loctite
• Sold as a pair

Synergy Manufacturing Ball Joints

From $250.00

Dee Zee Red Label Crossover Tool Boxes

From $484.99

• Non-Rusting .056 Brite-Tread Aluminum
• Lockable Stainless Steel Paddle Handle or Pull Handle Latches
• Internal Bends Add Superior Body Strength
• Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
• Dampened Gas Shocks Open At A Steady, Controlled Rate
• Crowned Lid With Full Length Hidden Hinge
• Self-Adjusting Lid Strikers For Secure Closing
• Double V-Pan Lid Stiffener Creates Strength and Rigidity
• Front, Back and Bottom Are Bent From A Single Piece Of Aluminum
• Removable Plastic Tool Tray To Keep Smaller Items Organized
• Made In USA
• Limited-Lifetime Warranty
• California Residents: WARNING

Synergy Manufacturing Tie Rods

From $350.00

Synergy Manufacturing Axle Housing Inner Sleeve Kit

From $150.00

• Designed to increase the strength of the front Axle housing which is prone to bending when larger off road tires are installed and used off road
• Inner Axle Sleeves add a 57% increase in strength over stock
• The stock axle housing must be drilled and plug welded for installation
• California Residents: WARNING

Synergy Manufacturing Steering Correction Kit

From $425.00

Dee Zee Specialty Series Narrow Crossover Toolboxes

From $375.99

• Constructed of durable Brite-Tread aluminum
• Lockable stainless steel paddle handles
• Dampened gas shocks
• Protective Black Powder Coat Finish
• Closed cell foam gasket and self-adjusting strikers
• J-Bolt mounting hardware included
• Ideal for today's short bed crew cab or any truck that doesn't want to lose valuable bed space
• Specialty Series Narrow Crossover Tool Box
• Non-Rusting .056 Brite-Tread Aluminum
• A Narrow Profile To Save Space In The Truck Bed
• Lockable Stainless Steel Paddle Handle Latches
• Internal Bends Add Superior Body Strength
• Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
• Dampened Gas Shocks Open At A Steady, Controlled Rate
• Crowned Lid With Full Length Hidden Hinge
• Front, Back and Bottom Are Bent From A Single Piece Of Aluminum
• Made In USA
• Limited-Lifetime Warranty
• California Residents: WARNING

Synergy Manufacturing Skid Plates

From $1,335.00

• Jeep skid plates manufactured from 3/16" crush resistant Grade A-572 Steel plate
• Flush mounted hardware provides a 100% smooth skid surface
• Premium powdercoat finish for maximum corrosion resistance
• Allows access to drain plug without removal
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Tie Rod Clamps

From $75.00

• CNC machined from 1020 DOM material
• 100% bolt on
• Zinc plated for corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Dee Zee NXc Running Boards

From $390.99

• Aluminum Powder Coat Frame
• Ample 5" Step Area
• Slip Resistant Rubber Grommets On Step Area
• Universal 71.5" Running Boards
• 3 Styling Options: Black Board/Black Trim, Black Board/Chrome Trim, Stainless Steel Board/Black Trim
• Custom Fit Mounting Braces
• Made In America's Heartland – USA
• Limited-Lifetime Warranty
• California Residents: WARNING

Synergy Manufacturing Front Track Bar & Sector Shaft Brace Kit

From $275.00

• Front Track Bar & Sector Shaft Brace Kit
• 2 and 4-door models
• Includes SYN8069-01 & SYN8069-02
• Steering Sector Brace
• Track bar brace
• Laser cut and CNC bent from 3/16" high strength steel
• Gray powder coat finish for maximum corrosion resistance
• Bolt on installation
• Made in the USA
• California Residents: WARNING

Dee Zee Specialty Series Top Sider Tool Boxes

From $1,017.99

• Storage For The Top Rail Of The Truck Bed
• Lockable Stainless Steel T-Handle Latch
• Drop Down Doors For Easy Access
• Safety Chains To Support The Door
• Water Resistant C-Channel and Bulb Seal To Help Keep The Elements Out
• Made In USA
• Limited-Lifetime Warranty
• California Residents: WARNING

Dee Zee BlackTread Wrap Side Bed Caps

From $141.99

• Brite-Tread Bed Caps
• Non-Rusting Brite-Tread Aluminum
• Wrap-Side Bed Caps Contour To Bed Edges
• Available With or Without Stake Pocket Holes Punched Out
• Sold In Pairs
• Made In USA
• Limited-Lifetime Warranty
• California Residents: WARNING

Synergy Manufacturing Suspension Systems

From $1,070.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.
• All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Front Track Bar Relocation Bracket

From $220.00

• This bracket raises the vehicle's axle side track bar mount
• Heavy-duty
• Special bolt-on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Steering Kits

From $1,050.00

• Requires a minimum of 2 inch front bump stop spacers
• 100% bolt-on
• Powdercoat finish for maximum durability and corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Dee Zee Red Label Utility Chests

From $1,268.99

• Non-Rusting .056 Brite-Tread Aluminum
• Lockable Stainless Steel Paddle or Paddle Handle Latches
• Two Finishes Available: Gloss Black or Texture Black Powder Coat Finish
• Side Handles For Easy Portability
• Internal Bends Add Superior Body Strength
• Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
• Dampened Gas Shocks Open At A Steady, Controlled Rate
• Crowned Lid With Full Length Hidden Hinge
• Double V-Pan Lid Stiffener Creates Strength and Rigidity
• Front, Back and Bottom Are Bent From A Single Piece Of Aluminum
• Removable Plastic Tool Tray To Keep Smaller Items Organized
• Select From Two (2) Generous Sizing Options
• Made In USA
• Limited-Lifetime Warranty
• California Residents: WARNING

Synergy Manufacturing HD Metal on Metal Tie Rod End Boot

From $10.00

• Tie Rod End Boots
• Made of tear/wear resistant black NBR and come with retaining springs
• Sold Individually
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Weld-On Front Track Bar Brackets

From $175.00

• Weld on design for strength and reliability
• Bracket raises the vehicles suspension roll center
• Bracket moves track bar closer to the axle centerline to clear aftermarket highsteer knuckles/tie rod at full steering lock
• Raising the roll center reduces vehicle body roll and dramatically improves overall handling
• Weld on tab included for mounting factory or aftermarket steering stabilizer up and out of harms way
• Laser cut from 3/16" steel
• California Residents: WARNING

Dee Zee UltraBlack 3 inch Round Side Steps

From $271.99

• UltraBlack Steel Powder coat Side Steps
• 3inch round tube
• California Residents: WARNING

Synergy Manufacturing Front Axle Assurance Kits

From $310.00

• Designed to strengthen the front axle
• Provides a 59% increase in strength over the stock axle tubes
• Inner C Gussets are laser cut and CNC bent in a heavy duty 3-sided construction
• Made in the USA
• California Residents: WARNING