Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING

Synergy Manufacturing Control Arm Cam Bolt Kit

From $45.00

• Synergy 9/16" Control Arm Cam Bolt Kit
• Cam bolts are manufactured from high carbon heat treated steel
• All included components are zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Cam bolt offers 1/2" adjustment in either direction
• The bolt will work on a mounting width of 2.25 - 3"
• California Residents: WARNING

Synergy Manufacturing Side Plate Mounting Kit (Arms Only)

From $75.00

• (2) Side Plate Mounting Arms only
• Jeep JK, 4 Door
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Rear Track Bar Brackets

From $100.00

• Bracket raises the vehicle's axle side track bar mount
• The vehicle's rollcenter is raised, reducing body roll and dramatically improving overall handling
• Special bolt on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Axle Bracket Kit

From $181.99

• Front and Rear applications
• Various mounts included
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Double Adjuster Tube Adapter

From $55.00

• Made from solid stock 1018 Steel
• Adapters Include: (1) Weld on Tube Adapter with Pinch Bolt Slit and Tubes, (1) Zinc Plated Double Adjuster Sleeve to be used with a Thread Shank Rod End, and (1) Pinch Bolt Hardware
• Welding required
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Rear Sway Bar Links

From $125.00

• Sway Bar Links
• Rear
• Compatible with lifts 2" and up
• Easy installation - 100% bolt on components
• Uses stock mounting hardware
• Made from 11/16" solid 1018 steel and are clear zinc plated for maximum corrosion resistance
• Can be cut down and retapped easily for custom applications
• Works with most aftermarket wheels up to 4.75" back spacing
• High quality rod end reduces bushing deflection causing the swaybar to opperate more efficiently
• Sold as a pair
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Dodge Front Lower Control Arm

From $550.00

Synergy Manufacturing 2 Inch Front Bump Stop Spacer Kits

From $85.00

• Synergy Jeep JK, TJ, XJ, ZJ Front Bump Stop Spacer Kit
• Manufactured from high grade 6061 Billet Aluminum material
• Hard anodized finish eliminates oxidation that can occur under extreme elements
• Bump Stops fit inside front coils and provide 2", 3", and 4" of extra limitation for larger tires
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• California Residents: WARNING

Synergy Manufacturing TRE Adapter

From $40.00

• Adapter is designed to flip the taper on the steering knuckle
• CNC machined from 303 stainless steel
• Sold Individually
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Bushings

From $125.00

• Bushing halves
• Bushing Kits
• Bushing Sleeves
• California Residents: WARNING

Synergy Manufacturing Front Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of front axle when running a suspension lift
• Features an abrasive resistant Powdercoat finish for maximum durability and corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Steering Stabilizer Relocation Kit

From $105.00

• Designed to relocate the factory stabilizer up and out of harms way
• The kit includes grade 8 hardware and is easily installed using basic hand tools
• Manufactured from high strength 3/16 inch steel
• Powdercoated for corrosion resistance
• Requires 2 inch bump stop spacers
• Note: 2011 and newer Jeeps will require the use of the 8003 Tie Rod Clamp
• Made in the U.S.A
• California Residents: WARNING

Design Engineering Inc Exhaust Wrap Kit

From $125.99

• The first step in controlling underhood temperatures is to keep heat in the exhaust and evacuate it out of the engine compartment. DEI?s Exhaust Wrap will reduce underhood temperatures by up to 50%, while providing additional horsepower, engine protection, and passenger comfort. Made of high-temp composite fiberglass with a proprietary coating to enhance heat retention and add durability. Guide line seams are sewn into the edges to ease installation. Available in 2 X 50' rolls or as part of a kit that includes 2 rolls of exhaust wrap, 1 can of black or silver HT Silicone Coating and all the necessary locking ties.
• California Residents: WARNING

Synergy Manufacturing Control Arm Bushing Outer Sleeve

From $30.00

• Control Arm Bushing Outer Sleeve
• Universal application
• Made of high strength steel
• Welding required
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Cam Bolt Eliminator Kits

From $110.00

• Designed To Take Place Of Cam Bolts Used On Stock Control Arm Mounts
• Desirable For Users Who Are Removing Cam Bolts And Upgrading To Adjustable Control Arms
• Laser Cut 3/16" High Strength Steel
• Zinc Plated For Maximum Corrosion Resistance
• Includes 4 Washers
• California Residents: WARNING

Synergy Manufacturing Dodge AAM 9-1/4 Inch Lower C-Gusset Kit

From $35.00

• Laser cut and CNC formed from high strength 3/16 inch steel
• Make in the USA
• California Residents: WARNING

Synergy Manufacturing Bracket Kit

From $200.00

• Easy installation
• 2.0 inch reservoir mounts sold separately
• Extended bracket measures 17 inch from bottom of bracket to center of bolt hole
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Front Air Bump Bracket Kit

From $140.00

Synergy Manufacturing Heavy-Duty Replacement Transmission Cross Member

From $315.00

• 3.6L and 3.8L gas engines with either automatic or manual transmissions
• Laser cut and CNC formed from 3/16 inch crush resistant Grade 50 A-572 steel plate
• Fully boxed construction with internal gusseting provides maximum strength where it counts
• Compatible with stock and most aftermarket skid plates
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Front/Rear Brake Line Kit

From $200.00

• Front and rear DOT approved brake line kit
• Features a special Kevlar liner in addition to the stainless steel braided cover
• They meet the strict guidelines of the U.S. Dept. of Transportation (D.O.T.) MVSS
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing HD E-Coated U-Bolt for 3.50 Inch Axle Tubes

From $25.00

• Axle U-Bolt Kit
• California Residents: WARNING

Synergy Steering Upgrades and Drag Links

From $450.00

• Requires use of Synergy Jeep JK Front Track Bar Bracket (#SYN8055) when flipping the drag link to the top of the knuckle. Requires TRE adapter (#SYN8001-03-01) to flip drag link. Requires a maximum 4-3/4 inch backspace wheel or wheel spacer with factory wheel setup. Can be used in factory position on bottom of steering knuckle Tie Rod and Drag Link both come with Synergy's own HD Metal on Metal Tie Rod Ends, SYN4131-L. Synergy Double Adjuster Sleeve allows adjustment of tie rod length without removing it from the vehicle.
• California Residents: WARNING

Synergy Track Bar Brackets

From $30.00

• Bracket can be trimmed to desired height to adjust the mounting position of the track bar to alighn the track bar and drag link in the same plane.
• California Residents: WARNING