G2 Axle & Gear Replacement Axle Kits

From $115.49

• Axle upgrade engineered to withstand the additional load of high-torque applications
• Stronger than factory
• Comes with full manufacturer warranty
• California Residents: WARNING

Pro Comp CV-Style Drive Shafts

From $463.99

• Front CV axle half shafts

G2 Axle & Gear Placer Gold Series Axles

From $104.00

• G/2s new made in the U.S.A. Placer Gold Series axles are an even stronger axle option for Jeep JK Wrangler owners. These new American made axles use high quality 4340 chromoly steel and feature a stronger forging with more material in critical areas.
• California Residents: WARNING

Rubicon Express CVF Drive Shafts

From $427.49

• Spicer drive shafts and components are as good as they get.
• Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of it's travel. measure your vehicle on the ground in the running position to get correct length.
• California Residents: WARNING

G2 Axle & Gear Core 44 Rear Bare Housings

From $900.00

• American-made CORE 44 housings
• Feature forged bearing caps
• G-lock adjuster nut system to set backlash and carrier bearing preload
• Additional ribbing on the cast center section
• California Residents: WARNING

Dana Spicer Dana 44 Front Axle Assemblies

From $3,796.99

• Genuine Spicers gears
• Thick axle tubes for improved strength
• Redesigned and thicker brackets
• Spicer chromoly axle shafts
• Performance differential cover and Spicer performance gasket
• Increased gross axle weight rating
• California Residents: WARNING

Warn Premium Manual Hub Kit

From $178.19

• For use with 28 spline outer axle
• 6 bolt flange style mounting
• All metal construction
• Includes stud kit part number WAR38803
• Limited lifetime warranty
• California Residents: WARNING

Dana Spicer Ultimate Dana 60 Axle Assemblies

From $8,499.99

• The strongest, most robust axle assembly on the market
• Massive Spicer SPL 70 u-joints—exclusive to Dana
• Provides optimal performance for lifted vehicles with larger tires
• Improved “rock solid” seals for optimal protection from environmental contamination
• Manufactured from cold-forged steel
• Spicer 35 spline SAE-4340 nickel chromoly steel axle shafts
• Warn 35 spline hub locks
• Allowing for wheel bearings to be serviced individually
• Easier to repair and service than unit bearing design
• High-strength, heavy gauge brackets
• Cover face rotated back for greater ground clearance
• Reinforced ribbing on bottom of carrier to prevent hang-ups on rocks or rough terrain
• Selectable electronic locking differentials
• Precision-forged gears offer ideal meshing, strength and durability
• Upper and lower control arms in same location as OE
• Better fit, less adjustment on control arm
• Genuine Made in the USA Spicer® 10" (256 mm) ring and pinion gear
• Precision heat treated for optimal hardness and durability
• Face hobbed for precise mating of gear teeth and a quieter ride
• Lapped to reduce noise and heat
• Spicer 1350 Strap-style/Half-round end yoke
• Axle tubes: 3.5" tube diameter/.370" wall thickness
• Helps prevent steering from being knocked out of alignment
• California Residents: WARNING

G2 Axle & Gear Birfield Axles

From $110.49

• G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
• California Residents: WARNING

Fabtech Spindle Systems

From $1,043.69

• Front and Rear Shocks Included
• Installation Hardware Included
• Total Bolt On Installation
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

RCV Ultimate CV Axle Shafts

From $1,049.95

• Twice as strong as OEM Jeep axles
• Eliminates U-joint binding to allow smooth transfer power to the ground
• Low maintenance and operate with a smoothness you can feel
• "No Questions Asked" limited lifetime warranty
• California Residents: WARNING

Dana Spicer Heavy Duty Axle U-Joints

From $241.99

• Heavy Duty Forged Cross
• Perma-lube Improved Seals For Long Service Life
• O.E.M Replacement
• Inside Snap Rings And Out Side Snap Rings
• California Residents: WARNING

Fabtech Spindles

From $571.81

• Two Steering Spindles
• Color: Black
• California Residents: WARNING

Rubicon Express Transfer Case Flange Adapters

From $34.65

• Billet aluminum flange
• 8mm-1.25 x 25mm socket cap screws
• California Residents: WARNING

Dana Spicer Ball Joint Kits

From $102.99

• Sold In Pairs
• 1 Upper Ball Joint
• 1 Lower Ball Joint
• California Residents: WARNING

Crown Automotive Axle Kits

From $104.99

• Direct-fit Jeep axles
• Available for numerous axle types, such as CV-style, C-clip, front inner and outer, and bolt-in
• Available for many Jeep models
• California Residents: WARNING

Dana Spicer Trac-Loc Limited Slip Differentials

From $494.99

• Replaceable Clutch Pack
• Smooth Street Operation
• Includes Carrier Bearings
• Includes Ring Gear Bolts
• Includes Shim Pack
• California Residents: WARNING

Centerforce Dual Friction Clutch Cover and Disc Kits

From $1,006.95

• Dual Friction Clutch Kit
• Incl. Pressure Plate
• Clutch Disc
• Does Not Include Throwout Bearing
• California Residents: WARNING

Warn Standard Manual Hub Kit

From $134.99

• Standard Manual Hub Kit
• Will Not Fit with Factory Optional Chrome Wheels
• California Residents: WARNING

Synergy Manufacturing Ball Joints

From $125.00

Moog Ball Joints

From $60.99

• Ball Joint
• California Residents: WARNING

Alloy USA Axle Shaft Kits

From $319.99

• Preminum 4340 Material
• Double Heat Treated
• Rolled Splines
• 10 Year Warranty
• California Residents: WARNING

Dana Spicer Ring and Pinion Kits

From $1,230.99

• Fits most 1996 and earlier standard rotation front and rear axles
• For use with 3.54 and down carrier
• Requires D/S706016X differential bearing kit to complete installation
• Includes pinion bearings
• Includes pinion seal
• Includes pinion shim pack
• Includes pinion preload shim pack or crush sleeve
• Includes pinion nut
• Includes differential shim pack
• Includes ring gear bolts
• Superior Metallurgy ensures more consistent, higher quality gears
• Hobbed and shaved gearing provides optimal mating to minimize stress and maximize life
• Precision heat-treating and shot-peening delivers consistent quality
• California Residents: WARNING

Alloy USA Axle Tube Seals

From $5.99

• Machined From Billet Aluminum
• Anodized Aluminum Finish To Resist Corrosion
• Keep Debris From Entering Axle Tubes
• California Residents: WARNING