Synergy Manufacturing Ram Adjustable Track Bar - 8550-11

• Fitment: Direct Fit
• 03-13 Dodge Ram 2500 4x4, 03-12 Dodge Ram 3500 4x4, 06-08 Dodge Ram 1500 Megacab 4x4
• Front track bar
• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts & hardware
• Made from high quality 1.5" x .250" wall DOM tubing
• Allows centering of front axle when running a suspension lift
• Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
• Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt
• Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing 2013 + Ram 3500 Leveling System - 8750-11

• Fitment: Direct Fit
• 2013+ Ram 2300 diesel models
• Kit includes: pair of front coil springs
• Front and rear Synergy tuned Fox shocks
• Raises the front suspension to level the truck
• Increases ride comfort and control
• Increases small bump compliance and bottom out resistance
• Increases wheel travel
• No loss in towing capacity
• Will allow installation of 35 inch or 37 inch tires
• Affordable Quality, made in the USA
• Proprietary Synergy tuned Fox shocks matched to the Ram's spring rates and weight provide incredible ride quality and control
• Front wheel travel is increased 40 percent from 7 inches to 10 inches and rear wheel travel is increased from 6.5 inches to 10 inches on 3500 trucks
• Progressive wound linear coil springs are manufactured using the latest in CNC hot winding technology for optimized on and off road performance
• Coil springs are softer than stock and raise the front of the truck 2.25 inches based on the weight of a 2500 Diesel Crew Cab configuration
• Coil springs are cycled to set height and can compress to solid without overstressing
• Coil springs feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Jeep JK/WJ Heavy Duty Ball Joint Set - 8009-12

• Fitment: Direct Fit
• Factory Replacement for Most Dana 44 and Dana 30 Applications
• Fully Greasable
• Sintered Metal On Bushing Design
• Silicone Boot
• 2 Upper Ball Joints
• 2 Lower Ball Joints
• Fits Jeep JK and WJ Including Rubicon
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Bracket Kit - 5021

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Synergy Jeep JK heavy duty front lower control arm frame bracket
• Replaces the weak factory front lower control arm mounts on the frame which often get destroyed from wheeling
• Laser cut & CNC formed from high strength 3/16" steel
• Designed to locate control arms in the factory location
• Built in lower skid plate helps to slide over obstacles
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Steering Stabilizer Clamp (1-1/2" OD Tube) - 4050-50

• Fitment: Direct Fit
• Fits factory Jeep JK tie rod
• Synergy Jeep JK tie rod
• Synergy Jeep TJ/XJ/ZJ/MJ drag link
• CNC machined from 1020 DOM material
• Zinc plated for maximum corrosion resistance
• Designed to mount factory and aftermarket style steering stabilizers utilizing a 1/2 inch mounting bolt and has a 5/8 inch mounting hole
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Note: Some late model Jeep JK (2011+) factory stabilizers will require the inner bushing sleeve to be drilled out to 1/2" for compatibility
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Jeep Dana 30/44 Heavy Duty Ball Joint Set - 4120

• Fitment: Direct Fit
• Factory Replacement for Most Dana 44 and Dana 30 Applications
• Fully Greasable
• Sintered Metal On Bushing Design
• Silicone Boot
• 2 Upper Ball Joints
• 2 Lower Ball Joints
• Fits All Jeep TJ / LJ
• Fits 90-01 Jeep YJ / ZJ / XJ
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Front Track Bar Relocation Bracket Kit - 8855-11

• Fitment: Direct Fit
• Correctly re-centers front axle at 3" lift height without a track bar
• Raises vehicle roll center height for improved stability and reduced body roll
• Lessens track bar angle to improve geometry
• Raises front track bar 3.125" from stock location
• Laser cut and CNC formed from 3/16 and 1/4 inch steel for precision fit and maximum durability
• Securely indexes to the factory track bar bracket and reinforces with additional attachment points
• Raises axle side sway bar mounting holes to improve geometry for lifted Jeeps
• 100 percent bolt-on design assures an easy, trouble free installation with the use of basic hand tools
• No cutting or drilling required
• Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Heavy-Duty Adjustable Ball Joints (Knurled) - 4127KN

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• 99-04 Grand Cherokee WJ
• Knurled version
• Tightens sloppy steering
• Designed to last the life of the vehicle
• Never need to replace ball joints again
• Best in class price/performance ratio
• Kit includes all 4 ball joints and lower ball joint adjuster tool
• Lower ball joints are rebuildable on the vehicle without removal
• Lower Ball Joint bearing surfaces are CNC machined from 4140 steel, heat treated, induction hardened, and ferritic nitrocarburized for extreme wear resistance
• Low profile dust boots are made from thick nitrobutile rubber
• Protects the joint from contaminants and eliminate any chance of tearing
• Zerk fittings included for trouble-free maintenance
• Limited Lifetime Warranty
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Dual Durometer Bushings (DDB) for Rear Upper Control Arm Joint (Frame Side) - 4801-22

• Fitment: Direct Fit
• Rear upper control arm frame side joint
• Dual Durometer Bushings (DDB) feature a maintenance free, grease less design
• Housings are forged from high strength 1045 steel and treated for corrosion resistance
• Control arm bushings are self centering with 30 degrees of misalignment
• Outer "soft" durometer acts as bushing cushion and flex material
• Inner "hard" durometer lining acts as the bearing surface to allow free floating inner sleeve to rotate
• Provides for a maintenance free "zero bind" bushing
• Internal bushing ring separates inner and outer materials to prevent inner sleeve gaping at extreme flex
• Direct replacement available for Synergy products using a Johnny Joint or rod end
• Available complete with bushing installed
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Steering Stabilizer Clamp (1-3/8" OD Tube) - 4050-38

• Fitment: Direct Fit
• Fits factory JK tie rod, Synergy JK tie rod and Synergy TJ/XJ/ZJ/MJ drag link
• CNC extruded and machined from 6061-T6 aluminum alloy
• Black anodized for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Notes: Some late model Jeep JK (2011+) factory stabilizers will require the inner bushing sleeve to be drilled out to 1/2" for compatibility. This sleeve is made of hardened steel, so be sure you have the resources to drill it out. Alternatively, an aftermarket stabilizer is recommended
• Synergy Manufacturing 8003-20 clamp, torque the socket head pinch bolts to 20 ft-lbs and " bolt to 75 ft-lbs. Torque the two set screws to 20 ft-lbs. After tightening all fasteners, cycle the steering to full lock in each direction. Carefully check to make sure the stabilizer and the clamp are not going to hit any other components, like the diff cover, track bar, track bar bolt, etc. It may be necessary to flip the body of the stabilizer depending on available clearance
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Rear Axle Truss - 8072-06

• Fitment: Direct Fit
• Rear truss
• Strengthens factory JK axle housing
• Formed design significantly reduces installation time compared to multi-piece designs
• Compatible with stock, Synergy bolt-on, and Synergy weld-on track bar relocation brackets
• CNC formed 3/16 inch steel construction
• Seams welded
• Compatible with both Rubicon and non-Rubicon Jeeps
• Does not require additional bump-stop spacer height
• Requires cutting/welding experience - should be installed by experienced welder/fabricator
• Axle truss and track bar brackets can be installed in any order
• Recommended to be used in conjunction with 8012-15 front axle truss
• Some trimming/fitment may be required due to slight variations from axle to axle
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Tie Rod Clamp Kit - 8568-11

• Fitment: Direct Fit
• Fabricated clamp to retain factory or aftermarket stabilizer with 1/2 inch mounting bolt
• FOX-982-24-941 Steering Stabilizer recommended
• California Residents: WARNING

Synergy Front Lower Suspension Control Long Arms - 8583-04

• Fitment: Direct Fit
• 03-12 Dodge Ram 2500 / 3500 4WD
• 06-08 Dodge Ram 1500 Megacab 4WD
• Designed to be used in conjunction with 8581 Synergy Dodge Long Arm Brackets
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• Made from high quality crush resistant 2" X .25 Wall 1026 DOM tubing
• Arms are designed and manufactured to maximize ground clearance
• The arms will allow the use of OEM wheels with larger tires without the requirement of an additional wheel spacer
• Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
• Synergy Double Adjuster Sleeve & Pinch Bolt Assembly: allows for adjustment of control arm length without removing control arm mounting bolt
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Sold as a complete pair
• Note: 8565 Cam Bolt Eliminators recommended for increased strength and extended bushing life
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Rear Track Bar Relocation Bracket - 8856-01

• Fitment: Direct Fit
• Wrangler JL, 2 & 4 Door
• Centers rear axle without requiring a new track bar for 2-3 inch lifts
• Improves rear track bar geometry to reduce the rear end wag experienced with a steep track bar angle
• Reduces body roll and improves handling
• Prevents interference between the rear driveshaft and gas tank skid when used with long travel shocks
• Raises rear track bar mounting location on the axle by 3.25 inches to raise the vehicle's roll center
• Ties into stock track bar bracket in multiple locations for improved strength and durability
• Laser cut and CNC formed from a combination of 3/16 and 1/4 inch steel for the optimum combination of strength, durability, and performance
• No U-bolts
• No cutting or drilling required
• Features an abrasion-resistant powder coat finish
• 100% bolt-on assures an easy, trouble free installation with the use of basic hand tools
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Rear Sway Bar Links - 8861-11

• Fitment: Direct Fit
• 20-Current Gladiator JT
• 18-Current Wrangler JL, 2 & 4 Door
• Synergy rear sway bar links
• Spherical bushing at axle side minimizes bind
• High quality rod end reduces bushing deflection causing the swaybar to operate more efficiently
• Easy installation using stock mounting hardware
• Sway Bar Links are made from 11/16" solid 1018 steel and are clear zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• (2) Rear sway bar links
• (1) Rear sway bar hardware kit
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Heavy-Duty Adjustable Rear Track Bar - 8862-01

• Fitment: Direct Fit
• Wrangler JL, 2 & 4 Door
• Compatible with 0-6 inches of lift
• Rear Track Bar Relocation Bracket recommended for lifts 2 inches and taller and requires a minimum 2 inches of bump stop spacing
• Made from high quality 1.50 inch x .250 wall DOM
• Allows centering of rear axle when running a suspension lift
• Retains factory track bar mounting bolts & hardware
• Abrasion-resistant powder coat finish for maximum durability and corrosion resistance
• Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing mounting bolt
• Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design
• 100% bolt-on components assures an easy, trouble free installation with the use of basic hand tools
• Bent to clear most aftermarket differential covers
• Limited Lifetime Warranty
• California Residents: WARNING
+ View More Specs - View Less Specs

Synergy Manufacturing Jeep JL Front Lift Coil Spring Set - 8863-30