Direct Fit Rear Direct Fit | 4wheelparts.com

Rolling into Wheel & Tire Month! Shop Now

Direct Fit Rear Direct Fit

11 Product Groups

Switch to View Products

SORT BY

Rubicon Express CVF Drive Shafts

Rubicon Express CVF Drive Shafts

From $427.49

Spicer drive shafts and components are as good as they get.
Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of it's travel. measure your vehicle on the ground in the running position to get correct length.
California Residents: WARNING

From $427.49

3.3 3.3 (6)

Dana Spicer Ultimate Dana 60 Axle Assemblies

Dana Spicer Ultimate Dana 60 Axle Assemblies

From $8,499.99

The strongest, most robust axle assembly on the market
Massive Spicer SPL 70 u-joints—exclusive to Dana
Provides optimal performance for lifted vehicles with larger tires
Improved “rock solid” seals for optimal protection from environmental contamination
Manufactured from cold-forged steel
Spicer 35 spline SAE-4340 nickel chromoly steel axle shafts
Warn 35 spline hub locks
Allowing for wheel bearings to be serviced individually
Easier to repair and service than unit bearing design
High-strength, heavy gauge brackets
Cover face rotated back for greater ground clearance
Reinforced ribbing on bottom of carrier to prevent hang-ups on rocks or rough terrain
Selectable electronic locking differentials
Precision-forged gears offer ideal meshing, strength and durability
Upper and lower control arms in same location as OE
Better fit, less adjustment on control arm
Genuine Made in the USA Spicer® 10" (256 mm) ring and pinion gear
Precision heat treated for optimal hardness and durability
Face hobbed for precise mating of gear teeth and a quieter ride
Lapped to reduce noise and heat
Spicer 1350 Strap-style/Half-round end yoke
Axle tubes: 3.5" tube diameter/.370" wall thickness
Helps prevent steering from being knocked out of alignment
California Residents: WARNING

From $8,499.99

TeraFlex CRD60 HD Axle Assemblies

TeraFlex CRD60 HD Axle Assemblies

From $2,719.99

Tera CRD60 specific high-pinion rear axle housing design
HD bearing caps increase rigidity and reduce ring and pinion distortion
Constant Radius Design (CRD) provides maximum ground clearance regardless of pinion angle
Built-in “skimmer” cuts ring gear oil halo and forces it into the pinion bearings
Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing
Oversized outer pinion bearing handles increased torque and high-load conditions
High-capacity housing holds maximum amount of oil
Asymmetric housing design for extra-long tube side strength
Pre-installed inner axle seals
Ductile cast iron housing with increased rib gussets
HD ductile iron differential cover with increased cover mounting area
Integrated lower control arm skid plates
High-flow oil passages
Bottom oil drain hole for simple fluid changes
Reinforced rear track bar mount with multiple mounting locations
UV protected triple-stage powder coat for corrosion resistance
1/4”-thick CNC laser cut axle brackets for extreme strength
Pre-installed upper control arm bushings
Proper pinion angle for lifted applications
Features a raised pinion angle and raised track bar bracket
Pre-tapped hole on spring perch for bump stop extensions
Pre-drilled holes for limit straps and lower spring retainers
Retains all ESP, ABS, and speedometer sensor capability
100% engineered, designed, and built in the USA with new components

From $2,719.99

J.E. Reel Drive Shafts

J.E. Reel Drive Shafts

From $597.55

1310 Heavy Duty front driveshaft
Stronger than O.E. type applications
J.E. Reel Drivelins are designed to work with 2.5"-4.5" lifts from most manufactures
2"x.120 Tubing
Grade 8 Hardware
1310 U-bolts
1310 U-Joints
California Residents: WARNING

From $597.55

Dana Spicer Drive Shafts

Dana Spicer Drive Shafts

From $740.99

50 percent thicker tubing than factory
Small diameter design for additional exhaust clearance
Bolts to factory differential yoke
Required transfer case flanged yoke not included
California Residents: WARNING

From $740.99

4.3 4.3 (4)

Crown Automotive Drive Shafts

Crown Automotive Drive Shafts

From $330.99

Drive Shaft
California Residents: WARNING

From $330.99

5.0 5.0 (7)

Omix-ADA Drive Shafts

Omix-ADA Drive Shafts

From $485.99

Drive Shaft
California Residents: WARNING

From $485.99

Rugged Ridge Rear Drive Shafts

Rugged Ridge Rear Drive Shafts

From $1,099.99

CV drive shafts are specifically made for NP231 slip yoke eliminator kits
California Residents: WARNING

From $1,099.99

Skyjacker Drive Shafts

Skyjacker Drive Shafts

From $579.87

Reduce or eliminate driveline vibration with a CV-equipped drive shaft.
Constant Velocity (CV) joints use two U-joints (double cardan style) in the place of a single U-joint.
California Residents: WARNING

From $579.87

TeraFlex Dana 60 Axle Assemblies

TeraFlex Dana 60 Axle Assemblies

From $5,548.99

Maximum Ground Clearance
Adjustable Control Arm And Track Bar Mounting Locations
Comes complete with properly matched components
Ultra-reliable package that exceeds stock axle performance, durability and reliability
California Residents: WARNING

From $5,548.99

Tuff Country Drive Shafts

Tuff Country Drive Shafts

From $574.95

Tuff Country's heavy duty drive-shafts are a upgrade over inferior stock driveshafts and are sometimes necessary after lifting your rig. Eliminate vibration, preserve proper driveline angles and upgrade the durability of your driveshaft with Tuff Country Driveshaft.
California Residents: WARNING

From $574.95

Join our mailing list to receive information on new products, special events, discounts and more!

By submitting, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from 4 Wheel Parts (4WP) on 21208. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy