G2 Axle & Gear Minor Ring and Pinion Installation Kits

From $35.99

• G2 Axle & Gear Minor Installation Kits include everything you need for a ring & pinion rebuild
• High-quality Timkin ball bearings
• Optimized shim kit for proper spacing
• Replacement pinion nut
• Crush sleeve
• Pinion seal
• Ring gear bolts
• Silicone sealer
• Genuine Loctite thread locking compound
• Gear marking compound
• California Residents: WARNING

Power Trax Lock-Right Lockers

From $264.99

• The original locking differential
• Outstanding value
• Completely replaces stock differential
• Reuses your vehicle's existing carrier
• Includes Zytanium cross shaft
• Fully automatic operation for ease-of-use
• Case not required
• Does not alter ring and pinion
• Works for both front or rear or in tandem
• Thorougly tested to provide solid, reliable performance
• Bolt-in installation
• No gear resetting or shimming required
• Available in 22, 26, 30 and 31 spline configurations
• California Residents: WARNING

Fabtech Spindle Systems

From $1,043.69

• Front and Rear Shocks Included
• Installation Hardware Included
• Total Bolt On Installation
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

G2 Axle & Gear Ford 8.8" Ring and Pinion Sets

From $146.24

• Ford 8.8 Inches Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear GM 12 Bolt Ring and Pinion Sets

From $369.99

• GM 12 Bolt Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

Auburn Gear ECTED Max Differentials

From $1,451.99

• Engineered to switch from Limited Slip to full Locking Differential on the fly
• Smooth engagement makes it well-suited for street use
• Activated via in-vehicle switch
• Gearing manufactured from aircraft quality 9310 billet steel
• Heat treated for additional strength
• Can be used with or without lockout hubs
• No additional parts required for installation
• 1-year replacement warranty
• California Residents: WARNING

G2 Axle & Gear Differential Carriers

From $72.00

• Serves as direct replacement for factory differential carrier
• Ideal for repairs and an economical way to get the proper case
• Quality materials and casting ensure perfect fit
• Available for AMC, Chrysler, Dana, Dodge, Ford, GM and Toyota applications.
• California Residents: WARNING

RCV Ultimate CV Axle Shafts

From $1,049.95

• Twice as strong as OEM Jeep axles
• Eliminates U-joint binding to allow smooth transfer power to the ground
• Low maintenance and operate with a smoothness you can feel
• "No Questions Asked" limited lifetime warranty
• California Residents: WARNING

Dana Spicer Heavy Duty Axle U-Joints

From $100.99

• Heavy Duty Forged Cross
• Perma-lube Improved Seals For Long Service Life
• O.E.M Replacement
• Inside Snap Rings And Out Side Snap Rings
• California Residents: WARNING

Fabtech Spindles

From $524.14

• Two Steering Spindles
• Color: Black
• California Residents: WARNING

Dynatrac Pro Steer Ball Joints

From $661.00

• Stronger than OEM ball joints
• Geaseable on the vehicle
• Rebuildable without special tools
• Improves vehicle handling
• Teflon coat internal wear points
• California Residents: WARNING

Rubicon Express Transfer Case Flange Adapters

From $34.65

• Billet aluminum flange
• 8mm-1.25 x 25mm socket cap screws
• California Residents: WARNING

Dana Spicer Ball Joint Kits

From $102.99

• Sold In Pairs
• 1 Upper Ball Joint
• 1 Lower Ball Joint
• California Residents: WARNING

G2 Axle & Gear AMC 20 Ring and Pinion Sets

From $146.99

• AMC 20 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Internal Gear Set Kits

From $69.00

• G2 Axle and Gear offers premium replacement internal kits for your differential. These high quality components are a direct fit, and allow you to replace damaged or worn gears without having to replace your entire differential carrier.
• California Residents: WARNING

Crown Automotive Axle Kits

From $104.99

• Direct-fit Jeep axles
• Available for numerous axle types, such as CV-style, C-clip, front inner and outer, and bolt-in
• Available for many Jeep models
• California Residents: WARNING

Dana Spicer Trac-Loc Limited Slip Differentials

From $1,043.99

• Replaceable Clutch Pack
• Smooth Street Operation
• Includes Carrier Bearings
• Includes Ring Gear Bolts
• Includes Shim Pack
• California Residents: WARNING

Alloy USA Heavy-Duty Ball Joint Kits

From $229.99

• Includes 2 upper and 2 lower ball joints
• High strength steel socket inner insert
• Made of 4140 Chromolly steel
• California Residents: WARNING

Centerforce Dual Friction Clutch Cover and Disc Kits

From $1,006.95

• Dual Friction Clutch Kit
• Incl. Pressure Plate
• Clutch Disc
• Does Not Include Throwout Bearing
• California Residents: WARNING

Warn Standard Manual Hub Kit

From $134.99

• Standard Manual Hub Kit
• Will Not Fit with Factory Optional Chrome Wheels
• California Residents: WARNING

Dana Spicer Outer Axle Seals

From $13.99

• Single Seal One Side Only
• California Residents: WARNING

Synergy Manufacturing Ball Joints

From $125.00

G2 Axle & Gear U-Joint Full Circle Snap Rings

From $0.80

• Fur Use With 5-760x Series U-Joint
• For Use With Aftermarket Axle Shafts
• Factory Shafts Will Require Machining
• Will WorkWith GM 10 Bolt Axles
• Single Snap Ring Only Qty 4 Required To Install 1 U Joint
• California Residents: WARNING

Moog Ball Joints

From $60.99

• Ball Joint
• California Residents: WARNING