G2 Axle & Gear Replacement Axle Kits

From $119.99

• Axle upgrade engineered to withstand the additional load of high-torque applications
• Stronger than factory
• Comes with full manufacturer warranty
• California Residents: WARNING

G2 Axle & Gear Master Ring and Pinion Installation Kits

From $116.99

• G2 ring and pinion installation kit
• Includes Timken bearings, ring gear bolts, shims to set pinion and carrier bearing preloads, pinion seal and pinion nut
• California Residents: WARNING

ARB Air Locking Differentials

From $1,041.20

G2 Axle & Gear Dana 44 JK Ring and Pinion Sets

From $103.50

• Dana 44 JK Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Ring and Pinion Sets

From $108.00

• Engineered and manufactured to handle increased load
• Forged from high-strength 8620 Steel
• Precision-machined to OE specifications for perfect mesh
• Tight tolerances ensure easy set up and quiet OE-like operation
• Double-lapped and shot-peened for improved longevity
• Heat-treated for added durability
• Wide application range from
• Full 10-year warranty
• California Residents: WARNING

Poison Spyder Bombshell Differential Covers

From $114.99

• Constructed from thick nodular iron
• Available in either bare steel or black powdercoat finish
• One of the thickest differential covers on the market
• California Residents: WARNING

G2 Axle & Gear Hammer Differential Covers

From $119.99

• G2 aluminum differential covers are designed to not only protect your ring & pinion, they are designed to help cool your gear oil for prolonged bearing life. Made from high strength heat treated aluminum to withstand direct hits, these covers help protect your investment while adding a distinct look to your vehicle.
• California Residents: WARNING

G2 Axle & Gear Brute Differential Covers

From $140.00

G2 Axle & Gear Dana 30 JK Ring and Pinion Sets

From $131.99

• Dana 30 JK Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

Rubicon Express CVO Drive Shafts

From $359.99

• Spicer drive shafts and components are as good as they get. Atlas transfer cases and any other 1310 series CV yoke. Measurements are taken center to center on the u-joint with the slip stub at the center of it's travel. measure your vehicle on the ground in the running position to get correct length.
• California Residents: WARNING

Rubicon Express CVF Drive Shafts

From $369.99

• Spicer drive shafts and components are as good as they get.
• Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of it's travel. measure your vehicle on the ground in the running position to get correct length.
• California Residents: WARNING

G2 Axle & Gear Dana 44 Ring and Pinion Sets

From $118.24

• Dana 44 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Dana 30 Ring and Pinion Sets

From $109.99

• Dana 30 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

Eaton E-Locker Differentials

From $1,249.99

• Electronically-selectable differential for on-demand traction
• Provides 100% axle lock on demand via on/off switch
• Switch is dash-mountable making it easier to reach
• Most reliable on-demand differential on the market
• Allows user to send all available torque to drive wheels
• Provides maximum traction to tackle the most challenging terrain
• Beefy, forged gears for added strength and reliability
• Works in both forward and reverse
• Time-tested performance and durability
• New wiring harness designed for straightforward installation
• Minimal wiring provides a clean, snag-free installation
• California Residents: WARNING

G2 Axle & Gear Drive Shafts

From $330.00

• Heavy-Duty 1 Ton Upgrade
• Made from heavy duty D.O.M. Tubing for strength
• Includes larger solid-body 1350 Series U-Joints for durability
• Dynamically balanced to eliminate vibration
• California Residents: WARNING

Dana Spicer Dana 44 Front Axle Assemblies

From $1,051.99

• Genuine Spicers gears
• Thick axle tubes for improved strength
• Redesigned and thicker brackets
• Spicer chromoly axle shafts
• Performance differential cover and Spicer performance gasket
• Increased gross axle weight rating
• California Residents: WARNING

Warn Premium Manual Hub Kit

From $382.99

• For use with 28 spline outer axle
• 6 bolt flange style mounting
• All metal construction
• Includes stud kit part number WAR38803
• Limited lifetime warranty
• California Residents: WARNING

ARB Differential Covers

From $187.00

• Cast from thick nodular iron
• Computer-optimized cross brace to improve axle rigidity
• Improved housing strength allows for optimal rin & pinion gear mesh
• Increases ring & pinion load bearing
• High-quality neodymium magnets for drain plug and dipstick attract and trap harmful metal particles
• Prolongs carrier bearing life by improving alignment
• Approach and departure angle optimzed via angled exposed cover surfaces
• Dipstick/filler cap design allows for easy oil leveling
• Eye-catching ARB logo cast into cover
• California Residents: WARNING

G2 Axle & Gear Chrysler 8.25" Ring and Pinion Sets

From $104.00

• Chrysler 8.25 Inches Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Birfield Axles

From $549.99

• G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
• California Residents: WARNING

G2 Axle & Gear Pinion Yokes

From $44.99

• G2 Axle and Gear offers multiple high quality Pinion Flanges and yokes for various applications with increased strength and reliability. Many of the G/2 yokes are equipped to uses the stronger and popular U-Bolt style mounting that is preferred by racers and off roaders alike.
• California Residents: WARNING

G2 Axle & Gear Minor Ring and Pinion Installation Kits

From $35.99

• G2 Axle & Gear Minor Installation Kits include everything you need for a ring & pinion rebuild
• High-quality Timkin ball bearings
• Optimized shim kit for proper spacing
• Replacement pinion nut
• Crush sleeve
• Pinion seal
• Ring gear bolts
• Silicone sealer
• Genuine Loctite thread locking compound
• Gear marking compound
• California Residents: WARNING

Power Trax Lock-Right Lockers

From $264.99

• The original locking differential
• Outstanding value
• Completely replaces stock differential
• Reuses your vehicle's existing carrier
• Includes Zytanium cross shaft
• Fully automatic operation for ease-of-use
• Case not required
• Does not alter ring and pinion
• Works for both front or rear or in tandem
• Thorougly tested to provide solid, reliable performance
• Bolt-in installation
• No gear resetting or shimming required
• Available in 22, 26, 30 and 31 spline configurations
• California Residents: WARNING

G2 Axle & Gear Ford 8.8" Ring and Pinion Sets

From $149.49

• Ford 8.8 Inches Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING