DV8 Offroad Ranger-4 Hard Top (Black) - HT07SB42

• Fitment: Direct Fit
• 07-18 Wrangler JK, 4-Door
• Satin black finish
• Two piece design
• Square back hard top
• Comes with tinted windows
• Comes carpeted inside
• Hardware included
• DV8 3-year limited warranty
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Yukon Dana 30/44 Spin Free Locking Hub Conversion Kit - YAWU-07

• Fitment: Universal Fit
• Dana 30 and Dana 44
• 27 spline
• 5 x 4.5 bolt pattern
• Uses outer axles which use a Spicer 5-760X u/joint
• Some early model housings use a smaller 5-260X joint and will require new inner axles to use this kit
• Heavy-duty 4340 chromoly outer axle stubs
• Premium Hardcore steel manual locking hubs with 1/3 - turn engagement
• Spindles and wheel hubs included
• Timken bearings, seals, and all necessary installation hardware
• Tapered roller bearings lower the cost to replace over factory unit bearing
• Spindle connects outer components to the steering knuckle
• Hardcore locking hubs allow for driving selectability, reducing wear on components
• California Residents: WARNING
+ View More Specs - View Less Specs

DV8 Offroad Rear Steel Bumper (Black) - RBDR2-03

• Fitment: Universal Fit
• Black powder coat finish
• Built-in steps on both sides
• Two flush mount LED cube lights included
• LED lights for license plate included
• Two D-rings included
• Compatible with factory hitch
• Installation is simple, and all hardware is included
• Sensor bezeles to snap into place sold separately (PartNo: MPRSNSR-01)
• 3 year warranty
• California Residents: WARNING
+ View More Specs - View Less Specs

Yukon Dana 30 and Dana 44 4.88 Gear and Install Kit Package - YGK079

• Fitment: Universal Fit
• Jeep Wrangler JL Non-Rubicon models
• Dana 30 front axle and Dana 44 rear axle
• 4.88 ratio
• Includes front and rear ring and pinion sets and master overhaul kits
• Yukon products are built to the highest standards
• Engineered using state-of-the-art design software
• Manufactured for dependable performance
• 1 year warranty against manufacturer defects
• California Residents: WARNING
+ View More Specs - View Less Specs

Yukon 5.13 Ratio Gear and Install Kit Package - YGK016

• Fitment: Universal Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Rubicon models
• 5.13 ratio
• Includes front and rear ring and pinion sets and master overhaul kits
• California Residents: WARNING
+ View More Specs - View Less Specs

Yukon 4.11 Ratio Gear and Install Kit Package - YGK055

• Fitment: Universal Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Non-Rubicon models
• 4.11 ratio
• Includes front and rear Ring & Pinions and Master install kits
• California Residents: WARNING
+ View More Specs - View Less Specs

Yukon Gear & Axle Heavy-Duty Front Drive Shaft with 1310 U-Joint - YDS007

• Fitment: Universal Fit
• 12-18 Wrangler JK, 2 & 4 Door
• Automatic transmission only
• 1310 u-joint size
• Extra heavy duty design
• California Residents: WARNING
+ View More Specs - View Less Specs

DV8 Offroad Traction Boards with Carry Bag (Olive) - RTB1-01OL

• Fitment: Universal Fit
• Olive
• Tested to withstand 10 tons of compression
• Ergonomic Handles are intuitive and easy to use
• Stackable to save space on the trail
• Additional functionality as a shovel
• Various holes throughout the boards allow multiple mounting options
• Base specifically made for a Hi-Lift style jack
• Come in a durable cloth carrying bag
• Sold as a pair
• California Residents: WARNING
+ View More Specs - View Less Specs

Yukon Dana 30 Front/Dana 44 Rear 4.56 Ratio Gear and Install Kit Package - YGK007

• Fitment: Universal Fit
• Fits Jeep TJ with Dana Spicer 30 front and Dana Spicer 44 rear
• 4.56 ratio
• Includes front and rear ring and pinion sets and master overhaul kits
• California Residents: WARNING

DV8 Offroad RS-4 Rear Bumper (Black) - RBSTTB-04

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Textured black powder coat finish
• 3/16 inch and 1/4 inch cold rolled steel
• .120 wall tubing
• High degree angles and raised corners
• Solid D-ring mounts with rings included
• Rear stubby bumper
• Class 3 hitch
• Easy installation, no modifications needed
• Hardware included
• California Residents: WARNING
+ View More Specs - View Less Specs

Yukon Dana 44 Dura Grip 30 Spline Spider Gear Kit - YPKD44-P-30

• Fitment: Universal Fit
• Dana Spicer 44 with Dura Grip positraction
• 30 spline axle
• Spider gear kit
• Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers
• 1 year warranty against Manufacturer defects
• California Residents: WARNING
+ View More Specs - View Less Specs

Yukon Gear & Axle Front Dana 44 Master Overhaul Kit - YKD44

• Fitment: Universal Fit
• Fits standard rotation Dana Spicer 44 front
• Included are Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers , thread locker, marking compound with brush, and gasket.
• California Residents: WARNING

Yukon Gear & Axle Dana 44 4.88 Ratio High Performance Thick Ring and Pinion - YGD44-488T

• Fitment: Universal Fit
• Fits standard rotation Dana Spicer 44
• 8.50 inch ring gear diameter
• 26 spline pinion
• 10 ring gear bolts
• 4.88 ratio
• Thick gear for 3.73 and down carrier
• California Residents: WARNING
+ View More Specs - View Less Specs

Yukon Model 20 Differential Master Overhaul Kit - YKM20

• Fitment: Universal Fit
• Included are Timken bearings and races along with high quality seals and small parts
• Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket
• Fits AMC Model 20
• California Residents: WARNING

Yukon Gear & Axle Dana 30 Master Overhaul Kit - YKD30-F

• Fitment: Universal Fit
• Fits standard rotation Dana Spicer 30 front
• Included are Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers , thread locker, marking compound with brush, and gasket.
• California Residents: WARNING

Yukon Gear & Axle Hardcore Dana 50/60/70 Differential Cover - YHCC-D60