Dynatrac Pro Steer Ball Joints

From $661.00

• Stronger than OEM ball joints
• Geaseable on the vehicle
• Rebuildable without special tools
• Improves vehicle handling
• Teflon coat internal wear points
• California Residents: WARNING

Factor 55 ProLink Loaded Shackle Mounts

From $157.00

• Titanium pin and rubber guard
• Fits all steel cables and synthetic ropes up to 3/8 inch in diameter
• Max load rating of 16,000 pounds
• Screw pin shackles are up to 5X stronger than conventional winch hooks
• Recover straps cannot slip out of a shackle like they can with hooks
• California Residents: WARNING

Dynatrac Free-Spin Heavy-Duty Hub Converstion Kits

From $2,202.00

• Dynatrac?s Free-Spin Heavy Duty Hub Conversion Kits replace the factory unit bearings with fixed spindles for superior strength, improved fuel economy, and smooth performance.
• California Residents: WARNING

Factor 55 FlatLink Shackle Mounts

From $104.00

• Grade 5 zinc plated steel pin and rubber guard
• Fits all steel cables and synthetic winch ropes up to 3/8? in diameter
• Precision machined from 6000 series aluminum
• Compatible with all roller fairlead license plate mounting brackets
• Max load rating of 16,000 pounds
• Ultimate strength of 45,000 pounds
• California Residents: WARNING

Factor 55 HitchLinks

From $125.00

• The HitchLink, manufactured from solid 6061-T6 aluminum
• Turns your tow hitch into a convenient and strong D-ring mount
• Anodized and powder coat for oxidation protection
• Made in USA
• California Residents: WARNING

Factor 55 Aluminum Hawse Fairleads

From $110.00

• Universal design
• 1 inch thick
• Mil-spec hard anodized gunmetal gray finish
• Constructed of billet aluminum
• Low-profile and lightweight
• California Residents: WARNING

Factor 55 Winch Locks

From $29.00

• Made from heat treated 1045 carbon steel, zinc chromate corrosion protection
• Proprietary security key pattern
• Hidden spring lock washer pocket ensures gapless installation
• 60 degree head taper to prevent removal with pliers
• Simple fail proof design
• Special coded security key allows for both end, and side access
• California Residents: WARNING

Factor 55 Shorty Straps II

From $44.22

• Available in 2"x 3 or 3"x 3' recovery strap
• 31,200 lb. or 38,000 lb. rating
• Made of heavy-duty polyester webbing
• Made in the USA
• California Residents: WARNING

Factor 55 ProLink XTV Winch Shackle Mounts

From $104.00

• Titanium pin and rubber guard
• Fits all steel cables and synthetic ropes up to 5/16 inch in diameter
• Max load rating of 6000 pounds
• Recover straps cannot slip out of a shackle like they can with hooks
• Billet construction - precision machined from 6061-T6 Kaiser Aluminum round bar
• California Residents: WARNING

Dynatrac Pro Series Iron Differential Covers

From $178.00

• Cast nodular iron construction
• Ribbed for extra strength
• Durable HammerTone powder coat finish
• Complete with fill and drain plugs
• Includes mounting hardware
• California Residents: WARNING

Dynatrac Locking Hubs

From $561.99

• Dynatrac Pro Series Hubs
• California Residents: WARNING

Factor 55 ProLink XXL Rubber Guards

From $16.00

• Made of pure high durometer EPDM rubber
• Scratch protection for alloy and roller fairleads
• Secure fit with 8 barbed rubber tips
• Made in the USA
• California Residents: WARNING

Factor 55 ProLink XTV Rubber Guards

From $11.00

• Made of pure high durometer EPDM rubber
• Scratch protection for alloy and roller fairleads
• Secure fit with barbed rubber tips
• Made in the USA
• California Residents: WARNING

Dynatrac ProRock 44 Front Axle Housings

From $3,728.00

• Patented ProRock shape delivers more ground clearance than a Dana 30
• In fact, that’s the most ground clearance of any Dana 44-based axle
• The strongest end forgings, made by Dynatrac in the USA
• Rock-proof nodular-iron Dynatrac differential cover included
• Heavy-duty 3.0-inch diameter axle tubes with .313-inch wall thickness
• DOM (drawn-over mandrel) tubing
• New upper suspension bushings already installed
• Laser cut suspension brackets that are thicker and stronger than factory
• Includes new replacement OE balljoints, already installed
• Retains the Next-Gen JK 44 ring and pinion for more strength over earlier Dana 44 designs
• Entire axle housing is manufactured in the USA

Factor 55 ProLink XXL Winch Shackle Mounts

From $229.00

• Titanium pin and rubber guard
• Fits all steel cables and synthetic ropes up to 1/2 inch in diameter
• Max load rating of 24,000 pounds
• Recover straps cannot slip out of a shackle like they can with hooks
• Billet construction - precision machined from 6061-T6 Kaiser Aluminum round bar
• California Residents: WARNING

Factor 55 UltraHook

From $280.00

• Integrated shackle pin mount
• Two methods of use: conventional hook opening, or shackle mount
• Shackle pin mount allows the safer practice of Closed System Winching
• Finger grip feature promotes proper “Hook Up” orientation
• Double locking safety clasp – lock the safety clasp with the included clevis pin
• Latch lock clevis pin stored conveniently in hook body
• Integrated EPDM rubber pads for fairlead surface protection
• Max opening deformation clearly laser engraved
• Lightweight - Precision CNC machined 7000 series Military Grade Aluminum
• No rope splicing required - double shear pin design accepts rope/cable eyes
• Designed for both steel cables and synthetic winch ropes
• Foldable to stow rattle free against fairleads
• Shackle pin mounting hole accepts 3/4 shackle pins (.875” diameter)
• For rope and cable diameters up to 3/8’’
• 5/8” diameter 6AI-4V grade V titanium double shear pin
• Max Rated Load: 16,000 pounds
• Ultimate Strength - Hook Throat Opening: 31,000 pounds
• Ultimate Strength - Shackle Pin Mount: 48,000 pounds
• Made in the USA

Dynatrac Axle Shaft Upgrade Kits

From $928.49

Dynatrac HardCore ProRock 60/60 Axle

From $19,397.30

• Dynatrac exclusive patented ProRock nodular-iron, high-pinion ProRock 60 centersection
• Best-in-class ground clearance and more ground clearance than a factory Dana 44
• Dual-Sump High Volume (DSHV) oiling system to ensure the outer pinion bearing is never without lubrication
• U.S.-made forged, double heat-treated 1480 35-spline, 1-ton axleshaft assemblies
• Dynatrac HD BallJoints
• Dynatrac HD tie rod, 4140 heat-treated steering arm
• California Residents: WARNING

Dynatrac Skid Plates

From $263.00

Factor 55 Splicer Winch Shackle Mounts

From $62.00

• Connects to both the pin and bow end of common 1/2 inch and 5/8 inch screw pin shackles
• Connects to the pin end of common 3/4 inch shackles
• For synthetic rope diameters up to 5/16 inch
• Weight 4oz
• California Residents: WARNING